Uploaded August 2025 | Updated September 2026, 1 hour ago
In Part 4 of the Hydra 13 Laser Setup Series, we dive into the controller functions and perform a laser beam alignment test to make sure your machine is ready for its first project. If you’re setting up a OneLaser Hydra or any CO₂ laser, this step is critical for accuracy, safety, and consistent engraving results.
We’ll walk through each controller menu, explain the most important features (manual movement, file loading, diagnostics, presets, autofocus, origins, framing, external devices), and show how to use the built-in alignment tools to verify both your glass tube and RF tube are perfectly aligned. You’ll also see where adjustments can be made on the mirrors if needed, and why proper alignment ensures precise cutting and engraving every time.
👉 Next up in the series: Connecting LightBurn and running our very first project!
What you’ll learn in this video:
Hydra 13 laser controller overview (menus, settings & features)
How to move the laser head with precision (manual mode, nudge settings, speed control)
Using diagnostics & safety features (lid protection, sensors, external devices)
How to set origins, frame jobs, and use autofocus correctly
Step-by-step laser beam alignment check for both glass and RF tubes
Where to adjust mirrors if alignment is off (mirror 1, 2, and 3 locations)
If you’re new to laser engraving, laser cutting, or Hydra machines, this guide will help you feel confident before starting your first project.
👍 Don’t forget to Like & Subscribe to follow along with the full setup series and future laser tutorials.
📌 OneLaser Hydra 13 Details & Links:
1laser.com/laserguys
Discount code: LASERGUYS
Join the OneLaser Community!
Facebook.com/groups/onelaser
In Part 4 of the Hydra 13 Laser Setup Series, we dive into the controller functions and perform a laser beam alignment test to make sure your machine is ready for its first project. If you’re setting up a OneLaser Hydra or any CO₂ laser, this step is critical for accuracy, safety, and consistent engraving results.
We’ll walk through each controller menu, explain the most important features (manual movement, file loading, diagnostics, presets, autofocus, origins, framing, external devices), and show how to use the built-in alignment tools to verify both your glass tube and RF tube are perfectly aligned. You’ll also see where adjustments can be made on the mirrors if needed, and why proper alignment ensures precise cutting and engraving every time.
👉 Next up in the series: Connecting LightBurn and running our very first project!
What you’ll learn in this video:
Hydra 13 laser controller overview (menus, settings & features)
How to move the laser head with precision (manual mode, nudge settings, speed control)
Using diagnostics & safety features (lid protection, sensors, external devices)
How to set origins, frame jobs, and use autofocus correctly
Step-by-step laser beam alignment check for both glass and RF tubes
Where to adjust mirrors if alignment is off (mirror 1, 2, and 3 locations)
If you’re new to laser engraving, laser cutting, or Hydra machines, this guide will help you feel confident before starting your first project.
👍 Don’t forget to Like & Subscribe to follow along with the full setup series and future laser tutorials.
📌 OneLaser Hydra 13 Details & Links:
1laser.com/laserguys
Discount code: LASERGUYS
Join the OneLaser Community!
Facebook.com/groups/onelaser
