Uploaded November 2020 | Updated November 2026, 2 hours ago
At the end of mowing season, resist the temptation to shove the mower to the back of the garage and forget about it. By spending an hour with your mower now, it will be easier to get it ready in spring, when your grass suddenly starts growing.
1. Gather the supplies you need
• Gas stabilizer
• Cleaning brushes, scraper and rags
• MO-DECK lubricant spray
• Air filter, if needed
• Drive belt, if needed
• Lubricant recommended in the owner's manual
2. Use or drain any untreated gas in the mower
• If you treated the gas with a fuel stabilizer the last time you filled the tank, you can leave the gas in the tank without worrying about it gumming up.
• If not, run the mower until the tank is empty or drain the tank. Be sure you’re in a well-ventilated area.
3. Clean the mower body
• When the engine is cool, disconnect the spark plug wire so the mower can’t start accidentally while you work on it.
• Clean the top of the mower by brushing off loose dirt, grass and dust. Then wipe with a damp cloth.
• If there's stabilizer-treated fuel in the gas tank, remove the gas cap, cover the opening with a plastic food storage bag and screw the cap on over the bag. This prevents fuel leaks when you tilt the mower over. Tilt the mower on its side with the air filter up, so oil won’t leak into the cylinder.
• Scrape the underside of the mower to remove grass deposits. A putty knife works well, but if you’re concerned about scratching the finish, use a plastic scraper. Wipe the underside of the mower deck with a wet rag, then dry it with a dry cloth. Spray the bottom of the mower deck with MO-DECK lubricant spray. MO-DECK helps prevent the mower deck from rusting during the winter.
• Clean dirt and grass clumps off the wheels, then turn the mower upright. Take the plastic bag off the gas tank opening if used.
• Remove the air filter. If you replaced it earlier in the season, just gently tap off loose dirt. Replace the filter if excess dirt doesn't come off, or if you’ve not replaced it this season.
• Remove the drive cover and clean the underside of the drive cover as well as the area it covers. Follow the instructions in your owner’s manual for removing the drive cover.
• Use a hard stream of water from a garden hose to clean the grass catcher. Let it dry completely.
4. Tighten fasteners and belts on the lawn mower
• Tighten loose nuts and other fasteners.
• On belt-driven mowers, tighten the belts as needed and check for excessive wear or cracks. Replace damaged belts.
5. Store the mower
• Put the mower away in a dry place.
• To keep the outside clean and to protect it from damage-causing moisture, you can cover it with a mower cover or a waterproof tarp.
• If storing the mower in an area with poor ventilation, use a light oil to coat the lawn mower—especially moving parts and the cables—to prevent rust.
We hope this video helped you out today. Please subscribe to our channel to see more repair tips and tricks.
For more DIY help, visit
searspartsdirect.com/diy/repair-help?sid=soc:youtube:DIY
Find parts for your walk-behind mower at
searspartsdirect.com/category/1234653/walk-behind-mower-parts?sid=soc:youtube:card-walk-behind-mower-parts
At the end of mowing season, resist the temptation to shove the mower to the back of the garage and forget about it. By spending an hour with your mower now, it will be easier to get it ready in spring, when your grass suddenly starts growing.
1. Gather the supplies you need
• Gas stabilizer
• Cleaning brushes, scraper and rags
• MO-DECK lubricant spray
• Air filter, if needed
• Drive belt, if needed
• Lubricant recommended in the owner's manual
2. Use or drain any untreated gas in the mower
• If you treated the gas with a fuel stabilizer the last time you filled the tank, you can leave the gas in the tank without worrying about it gumming up.
• If not, run the mower until the tank is empty or drain the tank. Be sure you’re in a well-ventilated area.
3. Clean the mower body
• When the engine is cool, disconnect the spark plug wire so the mower can’t start accidentally while you work on it.
• Clean the top of the mower by brushing off loose dirt, grass and dust. Then wipe with a damp cloth.
• If there's stabilizer-treated fuel in the gas tank, remove the gas cap, cover the opening with a plastic food storage bag and screw the cap on over the bag. This prevents fuel leaks when you tilt the mower over. Tilt the mower on its side with the air filter up, so oil won’t leak into the cylinder.
• Scrape the underside of the mower to remove grass deposits. A putty knife works well, but if you’re concerned about scratching the finish, use a plastic scraper. Wipe the underside of the mower deck with a wet rag, then dry it with a dry cloth. Spray the bottom of the mower deck with MO-DECK lubricant spray. MO-DECK helps prevent the mower deck from rusting during the winter.
• Clean dirt and grass clumps off the wheels, then turn the mower upright. Take the plastic bag off the gas tank opening if used.
• Remove the air filter. If you replaced it earlier in the season, just gently tap off loose dirt. Replace the filter if excess dirt doesn't come off, or if you’ve not replaced it this season.
• Remove the drive cover and clean the underside of the drive cover as well as the area it covers. Follow the instructions in your owner’s manual for removing the drive cover.
• Use a hard stream of water from a garden hose to clean the grass catcher. Let it dry completely.
4. Tighten fasteners and belts on the lawn mower
• Tighten loose nuts and other fasteners.
• On belt-driven mowers, tighten the belts as needed and check for excessive wear or cracks. Replace damaged belts.
5. Store the mower
• Put the mower away in a dry place.
• To keep the outside clean and to protect it from damage-causing moisture, you can cover it with a mower cover or a waterproof tarp.
• If storing the mower in an area with poor ventilation, use a light oil to coat the lawn mower—especially moving parts and the cables—to prevent rust.
We hope this video helped you out today. Please subscribe to our channel to see more repair tips and tricks.
For more DIY help, visit
searspartsdirect.com/diy/repair-help?sid=soc:youtube:DIY
Find parts for your walk-behind mower at
searspartsdirect.com/category/1234653/walk-behind-mower-parts?sid=soc:youtube:card-walk-behind-mower-parts










