Uploaded October 2024 | Updated November 2026, 17 hours ago
An extremely simple way to make a stand-alone quality SDR radio with professional capabilities and features, thanks to the excellent features of Pi Terminal-7” 1024*600 All-In-One Module Raspberry Pi and RTL-SDR V4 Dongle.
You can get the Elecrow Pi Terminal-7” 1024*600 Panel All-In-One Module Raspberry Pi CM4 Industrial Computer at the following address: shrsl.com/4q449
Detailed instructions at: hackster.io/mircemk/how-to-turn-a-7-inch-elecrow-pi-terminal-into-a-sdr-radio-c1684d
Chapters:
0:06 Short Demo
1:00 Package contents
1:53 Characteristics
3:24 Interfaces
4:49 Inside
5:27 Description SDR
7:24 Inside Box
8:26 Front Connectors
9:04 Speaker and Antenna
9:44 Factory Setup
10:57 Preparinfg Ham Pi SD card
12:34 Powering and demonstration
17:01 Wireless Tuning Knob
18:13 Conclusion
19:15 Building
A playlist of videos on this topic at: youtube.com/watch?v=w1pbAk7WA2o&list=PLAxrqEdgtyUXnLy3kTU0WbObQxiEfLDBx
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#hamradio #sdrradio #raspberrypi #elecrow
An extremely simple way to make a stand-alone quality SDR radio with professional capabilities and features, thanks to the excellent features of Pi Terminal-7” 1024*600 All-In-One Module Raspberry Pi and RTL-SDR V4 Dongle.
You can get the Elecrow Pi Terminal-7” 1024*600 Panel All-In-One Module Raspberry Pi CM4 Industrial Computer at the following address: shrsl.com/4q449
Detailed instructions at: hackster.io/mircemk/how-to-turn-a-7-inch-elecrow-pi-terminal-into-a-sdr-radio-c1684d
Chapters:
0:06 Short Demo
1:00 Package contents
1:53 Characteristics
3:24 Interfaces
4:49 Inside
5:27 Description SDR
7:24 Inside Box
8:26 Front Connectors
9:04 Speaker and Antenna
9:44 Factory Setup
10:57 Preparinfg Ham Pi SD card
12:34 Powering and demonstration
17:01 Wireless Tuning Knob
18:13 Conclusion
19:15 Building
A playlist of videos on this topic at: youtube.com/watch?v=w1pbAk7WA2o&list=PLAxrqEdgtyUXnLy3kTU0WbObQxiEfLDBx
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#hamradio #sdrradio #raspberrypi #elecrow




![DIY simple GU81 Tube Hybrid Amplifier (130 watts RMS in A class)
Tube amplifiers are highly respected by audiophiles for their distinctive sound as well as their esoteric appearance. The amplifier described in this project is also Hybrid but now the case is reversed and the Tube is used at the output, thus preserving all the positive features of a pure Tube Amplifier. Russian power pentode (transmitter tube) GU81 is used at the output.
Supposedly this tube in this connection (SE) should bring 130 watts RMS as pure Class A. It is basically very simple and consists of components that we can have, or can be very easily found, with the exception of the output audio transformer.
A short conclusion based on my previous extensive experience in the field of self-construction and listening, mostly on transistor amplifiers: Generally it can not be a high-end device, but it is a very interesting project because it shows how a relatively strong Hybrid Tube output amplifier can be made in a relatively simple way.
And as a very important note, keep in mind that this circuit is not a toy or a beginners craft project. Experimenting with it should only be done with well-founded specialist knowledge in the fields of electrical engineering / electronics. This circuit is only intended to show how enormous power amplifier can be generated with little effort. For safety reasons, the capacitors, transformer, and the bridge rectifier should be housed in a protected housing (wood / plexiglass).
Chapters:
0:10 Description
2:39 Parts
7:15 Demonstration
9:57 Conclusion
12:30 Building
You can find detailed build instructions and circuit diagrams at:
https://www.hackster.io/mircemk/diy-simple-gu81-tube-hybrid-amplifier-130-watts-rms-a5d142
If you are interested in this area visit my playlist at:
https://www.youtube.com/playlist?list=PLAxrqEdgtyUXvvvrIFRIsC8o5CSuUMnc8
If you like my job buy me a coffee: https://ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
https://www.youtube.com/c/MirkoPavleskiMK/videos
Track: Marin Hoxha - Endless [NCS Release]
Music provided by NoCopyrightSounds.
Watch more NCS on YouTube: https://NCS.lnk.to/YouTubeAT
Free Download / Stream: https://ncs.io/Endless
► Music Credit: K. LOUK
Track Name: Funkman
Music By: K. LOUK @ / @kloukk
The K. LOUK Official Spotify is HERE - https://open.spotify.com/artist/46klR...
Follow k. LOUK on Instagram: / kloukk
License for commercial use: Creative Commons Attribution 3.0 Unported (CC BY 3.0) https://creativecommons.org/licenses/...
Music promoted by Chill Out Records - NCM https://goo.gl/fh3rEJ
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#amplifier #electronics #tube DIY simple GU81 Tube Hybrid Amplifier (130 watts RMS in A class)](https://i.ytimg.com/vi/avFLmvUNgaA/mqdefault.jpg)





