Uploaded July 2023 | Updated November 2026, 5 days ago
This project is sponsored by PCBWAY pcbway.com/?from=MirkoP
This time I'm going to show you how to make some practical devices with a cheap compact ZVS driver module sold on AliExpress for less than $5. On the PCB there are two N-channel power MOSFETs of the H6LG type designed for low voltage, high speed switching applications in power supplies intended for Drain current up to 20 Amps.
I have tested this device in function of Induction heater, High Voltage source, and Wireless energy transfer device. It performs the function for which it is intended quite correctly, and I think that its limit for reliable operation is about 5A at 12V, which is half of what is declared by the seller. At higher currents, the mosfets heat up significantly and their burnout can happen very easily. But 60 Watts are quite enough, and as seen in the experiments, the module can work continuously for a relatively long time without problems.
Detailed instructionns at:
hackster.io/mircemk/induction-heater-hv-source-and-wireless-energy-transfer-3c688a
Chapters:
0:06 Short Demo
1:52 Description
3:36 Induction heater at 5V
4:36 Induction heater at 10V
5:12 Induction heater at12V
6:42 High Voltage Source
8:08 Wireless energy transfer
9:52 Conclusion
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#ZVS #inductionheater #electronics #energytransfer #HVsource
This project is sponsored by PCBWAY pcbway.com/?from=MirkoP
This time I'm going to show you how to make some practical devices with a cheap compact ZVS driver module sold on AliExpress for less than $5. On the PCB there are two N-channel power MOSFETs of the H6LG type designed for low voltage, high speed switching applications in power supplies intended for Drain current up to 20 Amps.
I have tested this device in function of Induction heater, High Voltage source, and Wireless energy transfer device. It performs the function for which it is intended quite correctly, and I think that its limit for reliable operation is about 5A at 12V, which is half of what is declared by the seller. At higher currents, the mosfets heat up significantly and their burnout can happen very easily. But 60 Watts are quite enough, and as seen in the experiments, the module can work continuously for a relatively long time without problems.
Detailed instructionns at:
hackster.io/mircemk/induction-heater-hv-source-and-wireless-energy-transfer-3c688a
Chapters:
0:06 Short Demo
1:52 Description
3:36 Induction heater at 5V
4:36 Induction heater at 10V
5:12 Induction heater at12V
6:42 High Voltage Source
8:08 Wireless energy transfer
9:52 Conclusion
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#ZVS #inductionheater #electronics #energytransfer #HVsource










