Uploaded March 2025 | Updated September 2026, 1 week ago
*** Use code Hoffman or links below for a discount! ***
Monport has released their latest GA MOPA Fiber Lasers. In this video I go over my setup and calibration process for this new fiber laser. I walk through uncrating (yes, crate, not box) and getting it setup in Lightburn, as well as how I run through my material settings tests.
Be sure to subscribe so you don't miss out on my upcoming full review of this GA60W MOPA Fiber Laser!
---------------------------------------------------------------------------
🆕 Find more information about the Monport GA60 MOPA Fiber Laser below (Affiliate Links):
*** Use code Hoffman or links below for a discount! ***
GA 60W MOPA Fiber Laser: monportlaser.com/products/monport-60e2m7-integrated-175af-mopa-fiber-laser-engraver-marking-machine?sca_ref=8239330.EDMEM0OuzY&sca_source=Setup
Include Rotary Attachment: monportlaser.com/products/monport-60e2m7-integrated-175af-mopa-fiber-laser-engraver-marking-machine?variant=44626258526407&sca_ref=8239330.EDMEM0OuzY&sca_source=Setup
---------------------------------------------------------------------------
👀 Want more or less power? Try these other GA MOPA fiber lasers:
GA 100W MOPA Fiber Laser: monportlaser.com/products/monport-100e2m7-integrated-175af-mopa-fiber-laser-engraver-marking-machine?sca_ref=8239330.EDMEM0OuzY&sca_source=Setup
GA 30W MOPA Fiber Laser: monportlaser.com/products/monport-30m7-integrated-175af-mopa-fiber-laser-engraver-marking-machine-1?sca_ref=8239330.EDMEM0OuzY&sca_source=Setup
---------------------------------------------------------------------------
See other accessories below (Affiliate Links):
150w 3-layer Fume Extractor: monportlaser.com/collections/fume-extractor/products/monport-150w-laser-fume-extractor-with-3-layer-filter-for-co2-fiber-laser-engraver?sca_ref=8239330.EDMEM0OuzY&sca_source=Setup
220W 3-layer Fume Extractor: monportlaser.com/collections/fume-extractor/products/monport-220w-laser-fume-extractor-with-3-layer-filter-for-co2-fiber-laser-engraver?sca_ref=8239330.EDMEM0OuzY&sca_source=Setup
220 Dual-port 3-layer Fume Extractor: monportlaser.com/collections/fume-extractor/products/monport-220w-dual-port-laser-fume-extractor-with-3-layer-filter-for-co2-fiber-laser-engraver?sca_ref=8239330.EDMEM0OuzY&sca_source=Setup
---------------------------------------------------------------------------
Materials I use in my Laser Cutter Reviews (Affiliate Links):
Multicolor Anodized Aluminum Business Card Blanks: amzn.to/3yqYcbh
Stainless Steel Jewelry Blanks: amzn.to/3xQeNEo
Slate Coasters: amzn.to/3fo2Nnf
Stainless Steel Business Card Blanks: amzn.to/3BKDraC
Veg Tan Leather Bracelets: amzn.to/3rdNmjO
Basswood Plywood Sheets: amzn.to/3M7jEpy
LED Acrylic Lamp Base: amzn.to/3M7jFK8
Black Acrylic Sheets: amzn.to/3vZNV4c
---------------------------------------------------------------------------
👀 See my recommended printers, filament, and accessories on my Amazon Idea Lists!
🆕 3D Printing Equipment for Beginners: amzn.to/2PNblSL
⚡ 3D Printing Equipment for Intermediate Hobbyists: amzn.to/2OOuQOy
💯 3D Printing Equipment for Advanced Users - Liquid Resin SLA/DLP: amzn.to/2PpqWuK
🎁 See the TEVO Tornado on Amazon: amzn.to/2TnhQhn
🎥 Hoffman Engineering Youtube/Video Equipment - See on Amazon: amzn.to/2O9oP9I
🆕 Microphone - Sennheiser XSW-D Lavalier Set w/ ME-II - amzn.to/2F6ORYY
Thank you to all my Patreons for helping make these videos possible.
Special thanks to my tier 2 and above patrons:
* Aaref A.
* Gábor B.
Christopher Hoffman
Hoffman Engineering
https://www.hoffman.engineering
[0:00] Intro
[0:31] Disclaimer
[0:50] Uncrating
[1:33] Overview of the GA60 MOPA
[2:17] Move to final position
[2:31] Fume Extractors
[2:52] Software - BSLAppSimple (EZCad)
[3:18] Software - Lightburn Setup
[4:36] Material Selection
[5:03] Autofocus
[5:19] First Logo Engraving on Coated Aluminum
[5:49] Material Test Pattern for Optimization
[7:06] Optimized Engraving on Coated Aluminum
[7:13] Galvo Confusion - X and Y Galvo Settings
[8:00] How to test scale/accuracy
[8:37] Deep Engraving Brass Coins
[9:25] Outro
#monport #fiberlaser #lasercutting
*** Use code Hoffman or links below for a discount! ***
Monport has released their latest GA MOPA Fiber Lasers. In this video I go over my setup and calibration process for this new fiber laser. I walk through uncrating (yes, crate, not box) and getting it setup in Lightburn, as well as how I run through my material settings tests.
Be sure to subscribe so you don't miss out on my upcoming full review of this GA60W MOPA Fiber Laser!
---------------------------------------------------------------------------
🆕 Find more information about the Monport GA60 MOPA Fiber Laser below (Affiliate Links):
*** Use code Hoffman or links below for a discount! ***
GA 60W MOPA Fiber Laser: monportlaser.com/products/monport-60e2m7-integrated-175af-mopa-fiber-laser-engraver-marking-machine?sca_ref=8239330.EDMEM0OuzY&sca_source=Setup
Include Rotary Attachment: monportlaser.com/products/monport-60e2m7-integrated-175af-mopa-fiber-laser-engraver-marking-machine?variant=44626258526407&sca_ref=8239330.EDMEM0OuzY&sca_source=Setup
---------------------------------------------------------------------------
👀 Want more or less power? Try these other GA MOPA fiber lasers:
GA 100W MOPA Fiber Laser: monportlaser.com/products/monport-100e2m7-integrated-175af-mopa-fiber-laser-engraver-marking-machine?sca_ref=8239330.EDMEM0OuzY&sca_source=Setup
GA 30W MOPA Fiber Laser: monportlaser.com/products/monport-30m7-integrated-175af-mopa-fiber-laser-engraver-marking-machine-1?sca_ref=8239330.EDMEM0OuzY&sca_source=Setup
---------------------------------------------------------------------------
See other accessories below (Affiliate Links):
150w 3-layer Fume Extractor: monportlaser.com/collections/fume-extractor/products/monport-150w-laser-fume-extractor-with-3-layer-filter-for-co2-fiber-laser-engraver?sca_ref=8239330.EDMEM0OuzY&sca_source=Setup
220W 3-layer Fume Extractor: monportlaser.com/collections/fume-extractor/products/monport-220w-laser-fume-extractor-with-3-layer-filter-for-co2-fiber-laser-engraver?sca_ref=8239330.EDMEM0OuzY&sca_source=Setup
220 Dual-port 3-layer Fume Extractor: monportlaser.com/collections/fume-extractor/products/monport-220w-dual-port-laser-fume-extractor-with-3-layer-filter-for-co2-fiber-laser-engraver?sca_ref=8239330.EDMEM0OuzY&sca_source=Setup
---------------------------------------------------------------------------
Materials I use in my Laser Cutter Reviews (Affiliate Links):
Multicolor Anodized Aluminum Business Card Blanks: amzn.to/3yqYcbh
Stainless Steel Jewelry Blanks: amzn.to/3xQeNEo
Slate Coasters: amzn.to/3fo2Nnf
Stainless Steel Business Card Blanks: amzn.to/3BKDraC
Veg Tan Leather Bracelets: amzn.to/3rdNmjO
Basswood Plywood Sheets: amzn.to/3M7jEpy
LED Acrylic Lamp Base: amzn.to/3M7jFK8
Black Acrylic Sheets: amzn.to/3vZNV4c
---------------------------------------------------------------------------
👀 See my recommended printers, filament, and accessories on my Amazon Idea Lists!
🆕 3D Printing Equipment for Beginners: amzn.to/2PNblSL
⚡ 3D Printing Equipment for Intermediate Hobbyists: amzn.to/2OOuQOy
💯 3D Printing Equipment for Advanced Users - Liquid Resin SLA/DLP: amzn.to/2PpqWuK
🎁 See the TEVO Tornado on Amazon: amzn.to/2TnhQhn
🎥 Hoffman Engineering Youtube/Video Equipment - See on Amazon: amzn.to/2O9oP9I
🆕 Microphone - Sennheiser XSW-D Lavalier Set w/ ME-II - amzn.to/2F6ORYY
Thank you to all my Patreons for helping make these videos possible.
Special thanks to my tier 2 and above patrons:
* Aaref A.
* Gábor B.
Christopher Hoffman
Hoffman Engineering
https://www.hoffman.engineering
[0:00] Intro
[0:31] Disclaimer
[0:50] Uncrating
[1:33] Overview of the GA60 MOPA
[2:17] Move to final position
[2:31] Fume Extractors
[2:52] Software - BSLAppSimple (EZCad)
[3:18] Software - Lightburn Setup
[4:36] Material Selection
[5:03] Autofocus
[5:19] First Logo Engraving on Coated Aluminum
[5:49] Material Test Pattern for Optimization
[7:06] Optimized Engraving on Coated Aluminum
[7:13] Galvo Confusion - X and Y Galvo Settings
[8:00] How to test scale/accuracy
[8:37] Deep Engraving Brass Coins
[9:25] Outro
#monport #fiberlaser #lasercutting
