How to replace LCD Screen on Razer Blade 17 RZ09 0423Q @Laptopscreen
How to replace LCD Screen on Razer Blade 17 RZ09 0423Q  @Laptopscreen
Uploaded September 2024 | Updated September 2026, 2 weeks ago
laptopscreen.com
laptopscreen.com/English/brand/Razer

This is a guide on replacing a screen on Razer Blade 17 RZ09-0423Q
For the replacement process we will need just a plastic pick.
To begin turn off the laptop and disconnect the power cord.
Insert a plastic pick between the bezel and the LCD. The bezel is held in place
with glue and a rubber insulation. Move the plastic pick around the perimeter.
separating the bezel. Put the bezel aside. Removed the remaining glue and rubber insulation.
We going to replace the glue later.
The screen in held in place with adhesive strips on left and right sides with loose
tabs at the bottom. Using loose tab pull out the adhesive strip on the right side.
Pull out the adhesive strip on the left side.
Place the screen on the keyboard. Using plastic pick and fingers peel off the clear tape
securing the video cable. Using plastic pick open the connector's bracket.
Disconnect the video cable and discard the old screen.
Place the new screen on the keyboard. Reconnect the video cable. Close the connector's bracket.
Secure it with clear tape. Now we can test the screen. Lift the screen up and lean it on the back cover.
Reconnect the power cable and turn the laptop on. The screen is working and we can finish
the installation process.
Place the screen back on the keyboard. Using alcohol and micro fiber cloth clean the sides of the
screen and the inner surfaces of the back cover.
Your new display may not come with adhesive. We offer standard double-sided tape for such repairs
on our site: laptopscreen.com
Apply the new adhesive strips and lift the screen up. Apply some pressure on the sides to catch the glue.
In order to replace the bezel we need to use a 1/8 inch double sided super adhesive tape. Cut 2 pieces
of adhesive tape and apply them on the left and right sides of the bezel. Replace the bezel.
Press firmly along the perimeter to catch the glue.
Turn the laptop on. And we are done!
ScreenFix.com - Send your cracked screen laptop to us for repair and it maybe featured on this YouTube channel!
How to replace LCD Screen on Razer Blade 17 RZ09 0423QShort video tutorial on how to replace screen Lenovo IdeaPad Slim 3 15ABR8 laptopLaptop screen replacement / LCD repair [Apple MBP Retina A1398]Asus X553S laptop screen replacementHow to replace screen on HP ProBook 450 G5How to replace LCD Screen on  Clevo N960KR. Step-by-step instructionsACER Aspire 5 A515-54-52BQ screen replacementHP Envy x360 model ES1023D screen replacement step-by-step guideLenovo ThinkPad T460 screen replacementiPhone 6 screen replacement / digitizer glass and LCD reinstallation instructionsiPhone SE 1st Gen screen replacement/digitizer glass and LCD re-installation instructionsiPhone 7 screen replacement / digitizer glass and LCD reinstallation instructions
LaptopScreen.com |

How to replace LCD Screen on Razer Blade 17 RZ09 0423Q

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER