How to Replace a Laundry Center Drain Pump @searspartsdirect
How to Replace a Laundry Center Drain Pump  @searspartsdirect
Uploaded June 2023 | Updated November 2026, 3 hours ago
This video #diy #repair video shows how to replace the drain #pump on common Kenmore and Frigidaire laundry centers.

If your washer doesn't drain, first check for a clogged washer drain or a kink in the drain hose. If the drain path is clear, you may need to replace the drain pump.

Visit us at https://www.searspartsdirect.com?sid=soc:youtube:how-to-replace-a-gas-laundry-center-drain-pump

Or call 1-800-437-1673 to speak with a parts specialist.

The video includes these parts. Look up your model to make sure you get the right parts for your laundry center.
Drain pump
searspartsdirect.com/part-number/137221600/0026/417.html?sid=soc:youtube:direct-part-link

Find parts for your laundry center at:
searspartsdirect.com/partsdirect/product-types/Washer-Dryer-Combo-Parts?sid=soc:youtube:laundry-center-parts

Or click here to schedule an appointment with a repair technician.
searshomeservices.com/repair#showall

Transcript:
If your washer doesn't drain, first check for a clogged washer drain or a kink in the drain hose. If the drain path is clear, the drain pump might have failed. If your pump won’t drain the water when activated, replace it using the steps in this video. Before you begin, wear work gloves to protect your hands. Unplug the laundry center. Shut off the gas. Remove the screws from the bottom of the front panel. Slide the front panel down to release the mounting tabs and pull it off. Place a towel under the pump to catch water from the hoses. Squeeze the hose clamps and pull the hoses off the drain pump. Disconnect the wires from the drain pump. Release the mounting tab and pull the plastic shield off the pump. Remove the pump mounting screws and pull out the drain pump. Position the new drain pump on the washer base and reinstall the mounting screws. Reinstall the plastic shield on the pump. Reconnect the wires to the drain pump. Reinstall the drain pump hoses and secure them with the hose clamps. Push the front panel mounting tabs into the mounting slots and slide the panel up to engage the mounting tabs. Reinstall the mounting screws. Plug the laundry center back in. Turn on the gas supply.
How to Replace a Laundry Center Drain PumpReplacing a Range Glass CooktopHow to Replace the Friction Pack on the RS800 CVT Transmission3 Easy Clothes Dryer HacksHow to adjust snowblower skid shoesHow to Connect Jumper Cables to a Riding MowerHow to Prevent BBQ Grill Flare-UpsHow to Fix a Flat Tire on a Riding MowerTop reasons why - Refrigerator won’t coolUse & Care Tips: 3 HVAC Maintenance StepsUse and Care Tips: Why You Need a Fridge Water FilterReplacing the Logic Board on a Garage Door Opener
Sears PartsDirect |

How to Replace a Laundry Center Drain Pump

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER