Uploaded July 2020 | Updated November 2026, 2 hours ago
If you need to change or sharpen your lawn mower blade, we’ve got a tip to make that job easier. Use a blade removal tool.
Blade removal tool
searspartsdirect.com/product/1ixm4lz42r-0071-247/id-490-850-0005?sid=soc:youtube:part
The tool, sold on SearsPartsDirect.com, is a clamp that holds the blade in place while you loosen and tighten the blade bolt. A block of wood can work in a pinch. But the wood can slip, making it harder to remove the blade bolt.
That won’t happen with the blade removal tool. The clamp holds the blade securely in place.
1. Check your owner’s manual for instructions on how to prepare your mower for blade removal.
a. On most walk-behind mowers, drain the gas tank, disconnect the spark plug wire and tilt the mower.
b. For riding mowers, disconnect the spark plug wire and remove the mower deck.
2. Place the blade removal tool over the blade and the side of the mower deck.
3. Tighten the clamping screw onto the mower deck firmly so the blade removal tool doesn’t move as you remove and replace the blade.
4. Remove the blade bolt and pull off the blade.
5. Install the new blade and tighten the blade bolt. Some manufacturers recommend torquing the blade bolt to 40-50 ft.-lbs. Check your owner’s manual for the blade bolt torque specification.
6. Loosen the clamping screw and take the blade removal tool off the mower deck.
7. Reassemble the mower according to the owner's manual instructions.
We hope this video helped you out today. Please subscribe to our channel to see more repair tips and tricks.
For more DIY help, visit
searspartsdirect.com/diy/repair-help?sid=soc:youtube:DIY
Find parts for your walk-behind mower at
searspartsdirect.com/category/1234653/walk-behind-mower-parts?sid=soc:youtube:card-walk-behind-mower-parts
If you need to change or sharpen your lawn mower blade, we’ve got a tip to make that job easier. Use a blade removal tool.
Blade removal tool
searspartsdirect.com/product/1ixm4lz42r-0071-247/id-490-850-0005?sid=soc:youtube:part
The tool, sold on SearsPartsDirect.com, is a clamp that holds the blade in place while you loosen and tighten the blade bolt. A block of wood can work in a pinch. But the wood can slip, making it harder to remove the blade bolt.
That won’t happen with the blade removal tool. The clamp holds the blade securely in place.
1. Check your owner’s manual for instructions on how to prepare your mower for blade removal.
a. On most walk-behind mowers, drain the gas tank, disconnect the spark plug wire and tilt the mower.
b. For riding mowers, disconnect the spark plug wire and remove the mower deck.
2. Place the blade removal tool over the blade and the side of the mower deck.
3. Tighten the clamping screw onto the mower deck firmly so the blade removal tool doesn’t move as you remove and replace the blade.
4. Remove the blade bolt and pull off the blade.
5. Install the new blade and tighten the blade bolt. Some manufacturers recommend torquing the blade bolt to 40-50 ft.-lbs. Check your owner’s manual for the blade bolt torque specification.
6. Loosen the clamping screw and take the blade removal tool off the mower deck.
7. Reassemble the mower according to the owner's manual instructions.
We hope this video helped you out today. Please subscribe to our channel to see more repair tips and tricks.
For more DIY help, visit
searspartsdirect.com/diy/repair-help?sid=soc:youtube:DIY
Find parts for your walk-behind mower at
searspartsdirect.com/category/1234653/walk-behind-mower-parts?sid=soc:youtube:card-walk-behind-mower-parts










