Uploaded December 2021 | Updated September 2026, 3 weeks ago
#vanlife #sprinter #vanconversion
So you purchased a used Sprinter and you can’t wait to get started on the build, but before you stuff your insulation and throw up a few studs, you need to take care of a few things.
In this video we’ll cover all the steps you should be taking in order to prep your used sprinter van for conversion.
Gut the van of any unwanted materials
Clean out the cobwebs and give it a bath
Identify and treat any exposed metal and rust.
Apply a new topcoat
Seal all of the exterior trim water leaks
Now that your van is looking and smelling better than ever, it’s time to move onto sound deadening. Stay tuned for our next video where we slap some tar on our walls.
In the meantime, if you’re interested in a cool 12v fridge for your van conversion go check out icecofreezer.com/discount/DogCatManVan to get 10% off your next purchase!
icecofreezer.com
There weren't too many specific products that we used during our preparations that need to be shared, but if you're interested in the rust reformer, protective enamel, and sealant we used, I'll link them below. PS....we went with spray paint thinking we were only going to touch up a few spots, but ended up covering the whole floor. If you plan on covering the same amount of surface area, it might be easier to go with a gallon and roll/brush it on.
Rustoleum Rust Reformer Spray Paint : amzn.to/3pPZSoM
Rustoleum Protective Enamel Spray Paint : amzn.to/3m7fnHL
OSI Quad Max Sealant : amzn.to/3E09KkF
If you have any questions make sure to shoot me an email at dogcatmanvan@gmail.com or leave a comment!
You can also support the channel by becoming a Patreon member!
patreon.com/user?u=27667694
Oh yeah, we have some shirts, stickers, and air fresheners available on our shop page here:
dogcatmanvan.myshopify.com
Follow us on instagram @dogcatmanvan
00:00 Intro
00:24 Gutting Your Used Van
02:29 Giving It A Good Scrub
04:25 Neutralizing Rust
07:14 Sealing Up Your Leaky Trim
11:12 Outro
#vanlife #sprinter #vanconversion
So you purchased a used Sprinter and you can’t wait to get started on the build, but before you stuff your insulation and throw up a few studs, you need to take care of a few things.
In this video we’ll cover all the steps you should be taking in order to prep your used sprinter van for conversion.
Gut the van of any unwanted materials
Clean out the cobwebs and give it a bath
Identify and treat any exposed metal and rust.
Apply a new topcoat
Seal all of the exterior trim water leaks
Now that your van is looking and smelling better than ever, it’s time to move onto sound deadening. Stay tuned for our next video where we slap some tar on our walls.
In the meantime, if you’re interested in a cool 12v fridge for your van conversion go check out icecofreezer.com/discount/DogCatManVan to get 10% off your next purchase!
icecofreezer.com
There weren't too many specific products that we used during our preparations that need to be shared, but if you're interested in the rust reformer, protective enamel, and sealant we used, I'll link them below. PS....we went with spray paint thinking we were only going to touch up a few spots, but ended up covering the whole floor. If you plan on covering the same amount of surface area, it might be easier to go with a gallon and roll/brush it on.
Rustoleum Rust Reformer Spray Paint : amzn.to/3pPZSoM
Rustoleum Protective Enamel Spray Paint : amzn.to/3m7fnHL
OSI Quad Max Sealant : amzn.to/3E09KkF
If you have any questions make sure to shoot me an email at dogcatmanvan@gmail.com or leave a comment!
You can also support the channel by becoming a Patreon member!
patreon.com/user?u=27667694
Oh yeah, we have some shirts, stickers, and air fresheners available on our shop page here:
dogcatmanvan.myshopify.com
Follow us on instagram @dogcatmanvan
00:00 Intro
00:24 Gutting Your Used Van
02:29 Giving It A Good Scrub
04:25 Neutralizing Rust
07:14 Sealing Up Your Leaky Trim
11:12 Outro
