Uploaded October 2012 | Updated November 2026, 3 days ago
How to make a Stirling engine using a tomato paste can and other household items. This is a single cylinder design or beta configuration. I start out with an overview of the design and a quick explanation of how the Stirling engine works. Then I go step-by-step through its construction, followed by it running and then some construction tips.
This one uses a balloon instead of a piston. It uses balsa wood for the displacer cylinder, coat hanger wire for the crankshaft along with a paperclip, a thread to connect the displacer to the paperclip, and a wooden flywheel. The connecting rods are attached to the diaphragm using thumbtacks.
To see my bigger Stirling engine for outdoor use, watch "Stirling Engine Explanation, Demos and Experimenting":
youtu.be/H1IkVMSBMRg
To see my bigger Stirling engine being powered by a Fresnel lens, watch "Stirling Engine Powered by Fresnel Lens/Concentrated Solar Power":
youtu.be/U5axWtCqgCA
As far as I can tell, the credit for this design goes to Mr. Saburo Tsucchida, a teacher of Kasukabe technical high school in Japan. I found it on Koichi Hirata's website:
bekkoame.ne.jp/~khirata/english/mk_can.htm
3D animations done using Blender 2.63.
To follow me on Twitter:
twitter.com/#!/RimStarz
rimstar.org
How to make a Stirling engine using a tomato paste can and other household items. This is a single cylinder design or beta configuration. I start out with an overview of the design and a quick explanation of how the Stirling engine works. Then I go step-by-step through its construction, followed by it running and then some construction tips.
This one uses a balloon instead of a piston. It uses balsa wood for the displacer cylinder, coat hanger wire for the crankshaft along with a paperclip, a thread to connect the displacer to the paperclip, and a wooden flywheel. The connecting rods are attached to the diaphragm using thumbtacks.
To see my bigger Stirling engine for outdoor use, watch "Stirling Engine Explanation, Demos and Experimenting":
youtu.be/H1IkVMSBMRg
To see my bigger Stirling engine being powered by a Fresnel lens, watch "Stirling Engine Powered by Fresnel Lens/Concentrated Solar Power":
youtu.be/U5axWtCqgCA
As far as I can tell, the credit for this design goes to Mr. Saburo Tsucchida, a teacher of Kasukabe technical high school in Japan. I found it on Koichi Hirata's website:
bekkoame.ne.jp/~khirata/english/mk_can.htm
3D animations done using Blender 2.63.
To follow me on Twitter:
twitter.com/#!/RimStarz
rimstar.org










