Uploaded November 2024 | Updated September 2026, 2 weeks ago
Update: Due to the volume of requests, the printable trap box plans are no longer distributed by email. They are now available through Buy Me a Coffee for a small channel-support fee. See the link below for details.
buymeacoffee.com/thewaytonative/extras
A simple, fun project for trappers: Making your own Lynx boxes suited for size #330 Conibear traps. Free plans are available upon request (just check the email address at the end of the video for that). Using the efficient pattern I have drafted, you will be able to make 3 Lynx boxes from every 4' x 8' sheet of 1/2" plywood you purchase, saving yourself lots of money.
Links are provided at the end for plans to build Fisher and Marten boxes as well.
List Of Tools Used For This Project:
- Drill and assorted bits
- Tin snips for wire mesh
- Hammer for finishing nails
- Mechanics wire
- Heavy stapler
- Wire cutters
- Chalk snap line
- Carpenter's pencil
- Tape measure
- Right angle square
- Screw driver with assorted bits
- C-Clamp(s)
- Jigsaw
- Circular saw
Would you like to support this channel's on-going work? Beside using YouTube's "Super Thanks" button (displayed below every video), you now also have a choice to "Buy Me A Coffee" using the following link:
buymeacoffee.com/TheWayToNative
Your support is greatly appreciated!
By the way, did you enjoy the music in this video? Subscribe to Epidemic Sound to get royalty-free music for use in your own content. It is what we use and, at the same time, you can help support this channel by using the following link when signing up for their service: share.epidemicsound.com/k0mqx9
DISCLAIMER: My videos are strictly for documentary, educational, and entertainment purposes only. Imitation or the use of any acts depicted in my videos is solely AT YOUR OWN RISK. All work on firearms should be carried out by a licensed individual and all state, provincial and federal rules apply to such. I (including YouTube) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any of my videos. I do not endorse any specific product and this video is not an attempt to sell you a good or service. I am not a gun store and DO NOT sell or deal in firearms. Such a practice is heavily regulated and subject to applicable laws. I DO NOT sell parts, magazines, or firearms. These videos are free to watch and if anyone attempts to charge for this video notify me immediately. By viewing or flagging this video you are acknowledging the above.
Fair Use: In the rare instance I include someone else’s footage, that is covered in Fair Use for Documentary and Educational purposes with the intention of driving commentary and allowing freedom of speech.
Update: Due to the volume of requests, the printable trap box plans are no longer distributed by email. They are now available through Buy Me a Coffee for a small channel-support fee. See the link below for details.
buymeacoffee.com/thewaytonative/extras
A simple, fun project for trappers: Making your own Lynx boxes suited for size #330 Conibear traps. Free plans are available upon request (just check the email address at the end of the video for that). Using the efficient pattern I have drafted, you will be able to make 3 Lynx boxes from every 4' x 8' sheet of 1/2" plywood you purchase, saving yourself lots of money.
Links are provided at the end for plans to build Fisher and Marten boxes as well.
List Of Tools Used For This Project:
- Drill and assorted bits
- Tin snips for wire mesh
- Hammer for finishing nails
- Mechanics wire
- Heavy stapler
- Wire cutters
- Chalk snap line
- Carpenter's pencil
- Tape measure
- Right angle square
- Screw driver with assorted bits
- C-Clamp(s)
- Jigsaw
- Circular saw
Would you like to support this channel's on-going work? Beside using YouTube's "Super Thanks" button (displayed below every video), you now also have a choice to "Buy Me A Coffee" using the following link:
buymeacoffee.com/TheWayToNative
Your support is greatly appreciated!
By the way, did you enjoy the music in this video? Subscribe to Epidemic Sound to get royalty-free music for use in your own content. It is what we use and, at the same time, you can help support this channel by using the following link when signing up for their service: share.epidemicsound.com/k0mqx9
DISCLAIMER: My videos are strictly for documentary, educational, and entertainment purposes only. Imitation or the use of any acts depicted in my videos is solely AT YOUR OWN RISK. All work on firearms should be carried out by a licensed individual and all state, provincial and federal rules apply to such. I (including YouTube) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any of my videos. I do not endorse any specific product and this video is not an attempt to sell you a good or service. I am not a gun store and DO NOT sell or deal in firearms. Such a practice is heavily regulated and subject to applicable laws. I DO NOT sell parts, magazines, or firearms. These videos are free to watch and if anyone attempts to charge for this video notify me immediately. By viewing or flagging this video you are acknowledging the above.
Fair Use: In the rare instance I include someone else’s footage, that is covered in Fair Use for Documentary and Educational purposes with the intention of driving commentary and allowing freedom of speech.
