How to Make an Aluminum Can Stove @vonmalegowski
How to Make an Aluminum Can Stove  @vonmalegowski
Uploaded August 2014 | Updated November 2026, 2 days ago
Gear & Studio Setup List: vonmalegowski.blogspot.com/2020/06/von-malegowskis-equipment-list-2020.html

This tutorial shows how to make a simple alcohol-burning soda can stove using just two empty aluminum cans, a nail or tack for punching holes, a coin, and denatured alcohol or camping fuel. While there are plenty of complex multi-chamber designs out there, this open-jet penny stove style is one of the easiest and most reliable builds to put together in a few minutes with basic tools.

To build it, cut the bottom sections off two beverage cans to a height of about two inches. Punch a ring of small burner jets around the outer rim of one base along with a few fill holes in the center, then nest the two sections together. A tight friction fit usually holds fine on its own, though you can add a dab of high-temperature sealant around the seam to prevent leaks. Pour alcohol into the top well so it drains through the center holes, cover the center with a coin, and ignite the primer fuel around the rim—once the aluminum warms up, pressurized vapor jets will light around the ring.

Beverage-can stoves are popular among ultralight backpackers because they weigh almost nothing and cost practically zero to make, though alcohol carries less energy density by weight than canister gas on multi-day treks. Ethanol (such as denatured alcohol) and methanol (like yellow HEET fuel-line antifreeze) burn cleanly with a nearly invisible flame, whereas isopropyl alcohol burns hotter on paper but produces heavy black soot on cookware.

Because alcohol flames are nearly invisible in daylight, always fill and light the stove outdoors on a stable, non-flammable surface, never add fuel to a warm or burning stove, and keep water or a fire extinguisher nearby.

Music: YouTube Audio Library
Track: Smart Riot
Artist: Huma-Huma
creativecommons.org/licenses/by/3.0

#AlcoholStove #UltralightBackpacking #SurvivalGear
©Von Malegowski. All Rights Reserved.
How to Make an Aluminum Can StoveHow to Open Locks with Padlock Shims 🔓How to Make Cream Puffs & ÉclairsHow to Make The Best Crispy Roasted PotatoesShooting a Winchester Model 94 .30-30How to Lift Fingerprints: Dusting For PrintsHow to Make a Paper Envelope ✉️How to Seal Food Without a Vacuum SealerDIY Lock Picks from Hack Saw BladesWhat Thermite is and How to Make itHow to Make a MATCHSTICK CIRCLE ⭕🔥How to Make Basic Lock Picks
Von Malegowski |

How to Make an Aluminum Can Stove

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER