Uploaded April 2016 | Updated November 2026, 10 hours ago
Gear & Studio Setup List: vonmalegowski.blogspot.com/2020/06/von-malegowskis-equipment-list-2020.html
This tutorial walks through bypassing spring-loaded padlocks using padlock shims—ultra-thin strips of curved spring steel sized to match the contour of a padlock shackle. Unlike traditional lockpicking that manipulates pins inside the keyway, shimming works by sliding the thin steel wedge directly between the shackle and the lock body and rotating it to push the internal locking pawl out of the shackle notch. As long as the lock uses spring-operated latches (rather than ball-bearing locking lugs) and leaves enough clearance around the shackle collar, a properly sized shim will disengage the mechanism in seconds.
Lock Picking Tools:
Lock Pick Set: banggood.com/custlink/KG3yMWfEZm
Padlock Shims: banggood.com/custlink/Kmvyqrfhi1
Tubular Lock Pick Set: banggood.com/custlink/GmvYMWfYOK
Jiggler keys: https://link.amazon/B05L6Qnzw
Padlock shims used in this video: sparrowslockpicks.com/category_s/2.htm
🔒How to Make a Simple Lock Shim🔒: youtu.be/GBOvt2VH5B0
To shim a padlock cleanly, start by checking whether the body uses a single or double latch—on most single-latch padlocks, the active locking dog sits on the same side as the cuts on the key, though you can test the pivot leg first to feel for resistance. Pick a shim radius that hugs the shackle tightly without binding, press it straight down into the gap as far as it will go, and twist the tongue sideways to cam the latch back out of the notch while pulling upward on the shackle. On older padlocks with weaker latch springs, pressing the shim directly down onto the angled face of the latch can sometimes push it back without even needing to rotate.
This video is strictly for locksport and educational purposes—never use these techniques on locks you do not own or lack explicit permission to open. Non-destructive entry techniques allow locksmiths and hobbyists to bypass or service hardware without damaging internal components, particularly on vintage locks that cannot be easily replaced.
Music: YouTube Audio Library
Tracks: Catch_a_Way, Ditch_Diggin, Loophole_Fragment
Artists: Everet Almond; Jingle Punks; Silent Partner
#Lockpicking #PadlockShims #Locksport
©Von Malegowski. All Rights Reserved.
Gear & Studio Setup List: vonmalegowski.blogspot.com/2020/06/von-malegowskis-equipment-list-2020.html
This tutorial walks through bypassing spring-loaded padlocks using padlock shims—ultra-thin strips of curved spring steel sized to match the contour of a padlock shackle. Unlike traditional lockpicking that manipulates pins inside the keyway, shimming works by sliding the thin steel wedge directly between the shackle and the lock body and rotating it to push the internal locking pawl out of the shackle notch. As long as the lock uses spring-operated latches (rather than ball-bearing locking lugs) and leaves enough clearance around the shackle collar, a properly sized shim will disengage the mechanism in seconds.
Lock Picking Tools:
Lock Pick Set: banggood.com/custlink/KG3yMWfEZm
Padlock Shims: banggood.com/custlink/Kmvyqrfhi1
Tubular Lock Pick Set: banggood.com/custlink/GmvYMWfYOK
Jiggler keys: https://link.amazon/B05L6Qnzw
Padlock shims used in this video: sparrowslockpicks.com/category_s/2.htm
🔒How to Make a Simple Lock Shim🔒: youtu.be/GBOvt2VH5B0
To shim a padlock cleanly, start by checking whether the body uses a single or double latch—on most single-latch padlocks, the active locking dog sits on the same side as the cuts on the key, though you can test the pivot leg first to feel for resistance. Pick a shim radius that hugs the shackle tightly without binding, press it straight down into the gap as far as it will go, and twist the tongue sideways to cam the latch back out of the notch while pulling upward on the shackle. On older padlocks with weaker latch springs, pressing the shim directly down onto the angled face of the latch can sometimes push it back without even needing to rotate.
This video is strictly for locksport and educational purposes—never use these techniques on locks you do not own or lack explicit permission to open. Non-destructive entry techniques allow locksmiths and hobbyists to bypass or service hardware without damaging internal components, particularly on vintage locks that cannot be easily replaced.
Music: YouTube Audio Library
Tracks: Catch_a_Way, Ditch_Diggin, Loophole_Fragment
Artists: Everet Almond; Jingle Punks; Silent Partner
#Lockpicking #PadlockShims #Locksport
©Von Malegowski. All Rights Reserved.










