Uploaded October 2013 | Updated November 2026, 48 minutes ago
Gear & Studio Setup List: vonmalegowski.blogspot.com/2020/06/von-malegowskis-equipment-list-2020.html
This tutorial shows how to make DIY padlock shims out of an empty aluminum soda can. Padlock shims are thin, curved pieces of springy metal that slip into the gap between a padlock's shackle and body to push back the internal locking latch, allowing you to bypass spring-loaded padlocks without a key or lockpicks.
Related Video
How to Open Locks with Padlock Shims: youtu.be/PC-1S4cHUPs
Lock Picking Tools
Lock Pick Set: banggood.com/custlink/KG3yMWfEZm
Padlock Shims: banggood.com/custlink/Kmvyqrfhi1
Tubular Lock Pick Set: banggood.com/custlink/GmvYMWfYOK
Jiggler keys: https://link.amazon/B05L6Qnzw
How to Make a Soda Can Lock Shim
1. Cut the top and bottom off an empty aluminum drinking can (thick plastic bottles can also work in a pinch) and slice the cylinder vertically so you have a flat sheet of metal.
2. Cut the aluminum into rectangular blanks measuring roughly 2.5 inches wide by 1.5 to 1.75 inches tall.
3. Trim each blank into an "M" shape, keeping the center peak either rounded or pointed.
4. Fold the top tip down slightly for reinforcement, fold the two outer legs up and around to form the collar, and wrap the finished shim around a pen so it matches the curve of a padlock shackle.
How to Use a Padlock Shim
Slide the curved tip down between the padlock body and the shackle on the side opposite the locking notch, then twist the shim around the shackle while gently working the shackle up and down. As the shim rotates into place, it wedges the spring latch out of the groove and releases the shackle. (Note: Shims only work on spring-loaded locking pawls and will not bypass ball-bearing locking mechanisms.)
Be careful handling cut aluminum edges so you do not slice your fingers, and only practice lock bypassing on padlocks you personally own or have explicit permission to open.
Music: YouTube Audio Library
Track: Pomade
Artist: Silent Partner
#Lockpicking #PadlockShim #LockBypass
©Von Malegowski. All Rights Reserved.
Gear & Studio Setup List: vonmalegowski.blogspot.com/2020/06/von-malegowskis-equipment-list-2020.html
This tutorial shows how to make DIY padlock shims out of an empty aluminum soda can. Padlock shims are thin, curved pieces of springy metal that slip into the gap between a padlock's shackle and body to push back the internal locking latch, allowing you to bypass spring-loaded padlocks without a key or lockpicks.
Related Video
How to Open Locks with Padlock Shims: youtu.be/PC-1S4cHUPs
Lock Picking Tools
Lock Pick Set: banggood.com/custlink/KG3yMWfEZm
Padlock Shims: banggood.com/custlink/Kmvyqrfhi1
Tubular Lock Pick Set: banggood.com/custlink/GmvYMWfYOK
Jiggler keys: https://link.amazon/B05L6Qnzw
How to Make a Soda Can Lock Shim
1. Cut the top and bottom off an empty aluminum drinking can (thick plastic bottles can also work in a pinch) and slice the cylinder vertically so you have a flat sheet of metal.
2. Cut the aluminum into rectangular blanks measuring roughly 2.5 inches wide by 1.5 to 1.75 inches tall.
3. Trim each blank into an "M" shape, keeping the center peak either rounded or pointed.
4. Fold the top tip down slightly for reinforcement, fold the two outer legs up and around to form the collar, and wrap the finished shim around a pen so it matches the curve of a padlock shackle.
How to Use a Padlock Shim
Slide the curved tip down between the padlock body and the shackle on the side opposite the locking notch, then twist the shim around the shackle while gently working the shackle up and down. As the shim rotates into place, it wedges the spring latch out of the groove and releases the shackle. (Note: Shims only work on spring-loaded locking pawls and will not bypass ball-bearing locking mechanisms.)
Be careful handling cut aluminum edges so you do not slice your fingers, and only practice lock bypassing on padlocks you personally own or have explicit permission to open.
Music: YouTube Audio Library
Track: Pomade
Artist: Silent Partner
#Lockpicking #PadlockShim #LockBypass
©Von Malegowski. All Rights Reserved.










