Peter Millard
| How to make a router table sled #045 @10MinuteWorkshop | Uploaded 3 hours ago | Updated 3 hours ago
🔇 TAP TO UNMUTE
How to make a router table sled #045 @10MinuteWorkshop
![Cabinet Door Sizing [*Ad] [video 549]](https://i.ytimg.com/vi/tyeGTD9aF4E/hqdefault.jpg "Cabinet Door Sizing [*Ad] [video 549]
Hi hope you’re well. So the ‘industry standard’ used in kitchen fits and the like are that doors should be the carcass height minus 5mm, and the carcass width, minus 4 mm, and that works well for most folks in the business. But as bespoke makers I don’t think it’s unreasonable to aim for something with slightly higher tolerances and tighter shut-lines, and this is how I do mine. Enjoy!
[*Ad] Like those previous videos this one is sponsored by Medite. You know Medite, they make top quality MDF, and every painted set of shelves, bookcases, wardrobes , cabinets or doors you may have seen me make on this channel was made with Medite MR or Moisture Resistant MDF, and in this video I’m using Medite’s ultimate MRMDF, Medite Optima.
Visit meditesmartply - links below - for more information on the product and stockists, and I’d like to thank Medite for the opportunity to use Optima on this project.
https://mdfosb.com/en/products/medite-optima?utm_campaign=MEDITE&utm_source=YouTube&utm_medium=Peter_millard
https://www.meditemakesitreal.com/?utm_campaign=MEDITE&utm_source=YouTube&utm_medium=Peter_millard
++++++++
Sign up for the newsletter at 10minuteworkshop.email or 10MW.email and get the free ‘Door Gaps’ fact sheet.
Visit the 10MinuteWorkshop store for the Loose Tenon Jig 30 and ‘Square Enough’ assembly guides at www.10minute.shop
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I may earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos and playlists of interest:-
Base Cabinet Basics - https://youtu.be/XQNeiPvEQ1I
Raised Panel Doors - https://youtu.be/94TGcWe7PBI
Concealed hinges - https://youtu.be/-Y6MEQlFEhQ
All about doors playlist - http://bit.ly/AllAboutDoors
All about hinges playlist - http://bit.ly/allabouthinges
Shaker-style cabinet doors - https://youtu.be/Px3D7wqycUc
Two easy doors - https://youtu.be/jwGvYsvdCg4
Previous series, Cabinetry Basics P1 - https://youtu.be/3N_T-YpkBCg
Loose Tenon Basics - https://youtu.be/t86QGUn7dAI
Why Buy This Saw? - https://youtu.be/u7H5On0j_5c
Festool’s Big Mistake? - https://youtu.be/Wc0MOV3HtjI
10MW Loose Tenon Jig 30 - https://youtu.be/enGVfEwD-Tc
Ikea Curtain track DIY MFT - https://youtu.be/223QALIbnRc
All About Drawers playlist - https://bit.ly/AllAboutDrawers
Tracksaw Workshop playlist - http://bit.ly/TracksawWorkshop
Jointing systems playlist - http://bit.ly/JointingSystems
+++++++++
Useful links:
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Blum 71B3550 hinge & cruciform plate set - https://amzn.to/40jfcfx
Blum 71B3750 (inset) hinges - https://amzn.to/3FI62zG
Blum standard ‘cruciform’ hinge plate - search for Blum 173L6100
Blum 173H7100 cam adjuster hinge plate - https://amzn.to/3shQfV6
Kreg hinge jig - https://amzn.to/2zyqQr7
Hinge drilling guide - http://amzn.to/2oYBHqk
Self-centering drill bit - https://amzn.to/3tUY9UN
Bradawl - https://amzn.to/45USN9p
I used the panel raising bit from Wealden tool - https://bit.ly/PanelRaisingBit
And their 1/4” grooving bit - https://bit.ly/SmallGroovingBit
Adjustable cabinet feet - https://amzn.to/3FigrSf
SpacePlugs -https://amzn.to/3S1Xtaf")
![Domino Follow-up [video #272]](https://i.ytimg.com/vi/u212fH426v8/hqdefault.jpg "Domino Follow-up [video #272]
Domino Follow-up [video #272]")
![Why Buy This Saw? [video 516]](https://i.ytimg.com/vi/u7H5On0j_5c/hqdefault.jpg "Why Buy This Saw? [video 516]
With a decent budget available how do you decide what #tablesaw to buy? After the recent vlog I had a lot of folks ask me what the other saws were that I considered on the path that led me to the dinky little #Festool #cordless trim saw, so I thought I’d do a quick talking head video about how it came about, and what my reasons were. Enjoy!
NB: I am not affiliated in any way with any of the above brands, and prices quoted are ‘street prices’ as of February 2023.
The restored Startrite TA 145 is still available; let me know if you’re interested and I can put you in touch - location is colchester, Essex.
NB: There are many “table saws” available, covering many aspects of woodworking with pros and cons to each type, and the ones I mentioned in this video are as follows:-
Site saws - Bosch GTS 10, DeWalt 745, Hikoki 36v, Milwaukee Cordless.
240v 16A Cabinet saws - SIP 01332 and Itech 01332, Axminster AP254PS13
240v 13A cabinet saws - Laguna Fusion 2, Charnwood W629, Charnwood W650
240v Lumberjack 10” cast iron ‘hybrid’ saw
Cast iron bench top saw - Axminster Workshop AW254TS
Cast iron cabinet saw - Axminster Professional AP254LTS
18v cordless Festool CSC SYS 50
Google them for more details.
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM will be significantly reduced from October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
Sean in the Shed Lumberjack saw review - https://www.youtube.com/watch?v=aNP-ZJ-nVDI
Badger Matt Axminster saw review - https://youtu.be/v4jG7qDbQ7o
Keith Brown table saw search - https://youtu.be/p1M7U-4JBvA
Paoson cast iron saw vs site saw - https://youtu.be/rh35NacsCR8
Paoson saw bench build - https://youtu.be/TSDRfrB_0BE
Dave Stanton SawStop - https://youtu.be/8mfxSCb-qS0
Cheap & Easy Tracksaw Mitre Jig - https://youtu.be/2SwGl5pzGHY
Mondrian-style table - https://youtu.be/bq7amS5MkPI
3 Drawers, no tape, no ruler - https://youtu.be/ObR9kbXu8PQ
Storage Cubes - https://youtu.be/Gyv-oGKRF30
Plywood shelves - https://youtu.be/gNobuRCBr_Q
Little Plywood Boxes - https://youtu.be/qg1jdYy0QTE
Drill Press Table - https://youtu.be/9w-MtpmBUWs
Ikea Curtain track DIY MFT - https://youtu.be/223QALIbnRc
New to track saws? Tracksaw workshop & all tracksaw-related videos in a playlist here - http://bit.ly/TracksawWorkshop")
![Matchfit Microjig Dovetail Clamps [**Gifted/Ad] [video 499]](https://i.ytimg.com/vi/uiT6F-K26Tg/hqdefault.jpg "Matchfit Microjig Dovetail Clamps [**Gifted/Ad] [video 499]
In this video I turn my Workshop MFT into a hybrid #Matchfit #MFT, and take a tour around the Matchfit Dovetail clamp system from #MicroJig. Enjoy!
** The Matchfit Dovetail clamp system from MicroJig was supplied for review by Wood Workers Workshop. I have not been paid to make this video or say nice things about the product. As a WWW Affiliate, I may earn from qualifying sales; use the offer code “10minuteworkshop” at checkout for a 5% discount off all MicroJig products from Wood Workers Workshop, discount code valid for 30 days.
+++++++++
Become a 10minuteworkshop Plus member at 10minuteworkshop.plus
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
MFT Playlist - all my MFT & MFT-related videos in one place - http://bit.ly/MFT-related
Ikea Curtain-track MFT - https://youtu.be/223QALIbnRc
Backyard, Budget DIY MFT -https://youtu.be/xIi-I04ocVM
Pocket-money Rail Square - https://youtu.be/VaxG6vNF1kY
Tracksaw workshop playlist - http://bit.ly/TracksawWorkshop
Festool or Mafell https://youtu.be/5kqui1b0SbU
Square Cuts: MFT or Rail Square? - https://youtu.be/3C8XSWliOys
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
+++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs and Rennie Tools affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Featured/mentioned in this video:-
MicroJig Matchfit Dovetail clamp Pro kit - https://woodworkersworkshop.co.uk/micro-jig-matchfit-dovetail-clamp-pro/?ref=YUDlxZ4f
X-Pad set - https://woodworkersworkshop.co.uk/micro-jig-matchfit-x-pad-4-pack/?ref=YUDlxZ4f
Relief Bit - https://woodworkersworkshop.co.uk/micro-jig-matchfit-relief-router-bit-1-2-shank/?ref=YUDlxZ4f
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++
MFT, MFT top, Festool MFT, Festool MFT Table, woodwork, tracksaw, plungesaw, track saw, plunge saw, MFT Bench, router, Clamps, clamping")
![Cabinetry Basics P4 [Video 438]](https://i.ytimg.com/vi/urMoCGpzZTc/hqdefault.jpg "Cabinetry Basics P4 [Video 438]
I get a lot of questions about #cabinet and #carcass #construction and in this series I aim to answer them all; in Part 1 I discussed the fundamentals of construction, in Part 2 I went through the most basic methods of joining the sides to the top & base, in Part 3 I looked at seven different types of hidden fixings, and in this concluding Part 4 I discuss wether you should fit a back, and how they should be hung on the wall…
Part 1 is here - https://youtu.be/3N_T-YpkBCg
Part 2 is here - https://youtu.be/LPGH_BhIzZg
Part 3 is here - https://youtu.be/iKle2JqhEV8
+++++++++
Become a 10minuteworkshop Plus member - more details at 10minuteworkshop.com, sign up directly at 10minuteworkshop.plus
**Support 10 Minute Workshop as a YouTube Member** http://bit.ly/10minuteMember
**Support 10 Minute Workshop on Patreon** - http://www.patreon.com/10minuteworkshop
**Please note that I am moving away from the legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM will be significantly reduced from October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
If you’re looking for a few gift ideas and would like to support the channel then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
As an Amazon Associate, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
++++++++
Mentioned in this video:-
Keyhole hanging plates (similar) https://amzn.to/3advhcW (US: (similar) https://amzn.to/3ovQHXJ)
Corner plate - https://amzn.to/3raoiZh (US: Nope, sorry 🤷♂️)
Cabinet hanging bracket wall plate - https://amzn.to/3adybOS (US: (complete bracket) https://amzn.to/2NLPWx7)
Grooving bit - https://amzn.to/3rc9LMJ (US: (OUCH!) https://amzn.to/36nx9Pa)
14mm straight bit for hanging plate - https://amzn.to/3pB8sX3 (US: https://amzn.to/2MhCBwd)
Self-centering bit is a Trend snappy one from this set - https://amzn.to/38FuzpO (US: (single bit) https://amzn.to/36tzTe1)
Ryobi air strike narrow crown stapler - https://amzn.to/3h6Mo2E (US: https://amzn.to/3283zeI)
Dowel jig kit - https://amzn.to/36FLdnx (US:[similar] https://amzn.to/3a0HKjX)
8 x 30mm dowels - https://amzn.to/38yb16J (US:[3/8th] https://amzn.to/2KJAKQ5)
Lamello Biscuits - https://amzn.to/39fuNnv (US: https://amzn.to/367dEKL)
Aldi Ferrex biscuit jointer no longer available
Festool Domino - http://amzn.to/2pVSnMk (US: http://amzn.to/2o7E22Q)
Festool Domino assortment - http://amzn.to/2piZjHa (US: http://amzn.to/2pGv1Lx)
Festool Domino 5 x 30mm - http://amzn.to/2oTq5CZ (US: http://amzn.to/2oOqyrL)
Domino connector set - https://amzn.to/2mV8OJu (US:https://amzn.to/2LKRDZ1)
Lamello Zeta P2 - https://amzn.to/2Xpu5vB (US: https://amzn.to/2Kufuv1)
Lamello Clamex P-14 https://amzn.to/2Wkm922 (US: ??)
Peanut 2 connector system - http://shop.intelligentfixings.com?ref=10minuteworkshop
Lamello Tenso P-14 - https://amzn.to/2Z5i4eX (US: woah - are these not available in the US??)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Bessey Duo Klamp - http://amzn.to/2tsSWQs (US:http://amzn.to/2sVaRBH)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
++++++++
Other useful gear…
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool Granat abrasive - http://amzn.to/2A3c1vW (US: http://amzn.to/2gPAAUz)
Festool RTS 400 - http://amzn.to/2x6zGZW (US: http://amzn.to/2i84yXn)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Festool ETS 150/5 - http://amzn.to/2sapsq9 (US: http://amzn.to/2ssbZgq)
Festool CTL Sys - http://amzn.to/2sKa2t3 (US: http://amzn.to/2tCvVdZ)
Festool CTL SYS Bags - https://amzn.to/2G9eFVd (US: https://amzn.to/2GduBpo)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
Silicone brush set - http://amzn.to/2guo6Sm (US: http://amzn.to/2yEWbZI)
Silicone brush (single) - http://amzn.to/2l5rNTD (US: http://amzn.to/2zqFaQl)
Polyvine PolyTen PVA - http://amzn.to/2svT03N (US: http://amzn.to/2rmHYL3)")
![If Clamps Fight Back - Make A Rack! [video 459]](https://i.ytimg.com/vi/uyJZ-lQ0LHw/hqdefault.jpg "If Clamps Fight Back - Make A Rack! [video 459]
In this video I tackle some overdue workshop organisation, and try to make sense of the mess of clamps that I’ve accumulated. Time to make a rack - or two - I think, and these ones have a little twist in the construction. Enjoy!
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos mentioned:-
Peanut vs Tenso - https://youtu.be/0RuO_jljpTA
Peanut Mini Jig - https://youtu.be/DsvpAjGizKs
DIY Peanut Jig - https://youtu.be/jhhCnv9rW0M
Workshop shelves & cabinets - https://youtu.be/iaB_CL5md8U
Fan in a can - https://youtu.be/DcuIU4WsiWA
+++++++++
For gift ideas, visit my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video:-
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Irwin quick grip clamps - https://amzn.to/3eF8ZV3 (US: https://amzn.to/3tMuJmh)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Aluminium sash clamp - https://amzn.to/3o7jwLG (US: [similar - link for reference, crazy price!] https://amzn.to/3hhqz2S)
F clamp [similar] - https://amzn.to/2RHbSvm (US: [similar] https://amzn.to/3bj3ARq)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![Whats The Point of a Joint? [video 538]](https://i.ytimg.com/vi/vGDUBy5mx78/hqdefault.jpg "Whats The Point of a Joint? [video 538]
As I mentioned in the previous video I’m drifting towards a couple of small projects that involve a little bit of basic joinery, and in the run-up to that, I’m trying to plan a couple of videos that help explain the process; there’ll be a ‘Which joint when’ type of video, and probably a ‘5 basic joints and how to fake them’ but in this video I want to try and explain what it is we’re trying to do by joining a couple of pieces of timber or board together.
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I may earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
It’s not good - it’s great! - https://youtu.be/28mywqdvXq4
Strong, or Strong enough? - https://youtu.be/6jRqt1HBHsM
Tracksaw Picture Frame - https://youtu.be/UuWLWT-ZKTg
Why Buy This Saw? - https://youtu.be/u7H5On0j_5c
Festool’s Big Mistake? - https://youtu.be/Wc0MOV3HtjI
3 Drawers, no tape, no ruler - https://youtu.be/ObR9kbXu8PQ
Basic Builds playlist - https://bit.ly/BasicBuilds
+++++++++
Useful links:
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Handy consumables & gear:-
Festool CSCSYS50 [price hike!!] - https://amzn.to/3X6tnD1
Festool OF1400 - https://amzn.to/3Q7SljY
Festool CTL Midi vac with bluetooth - https://amzn.to/3q9RnZK
Bluetooth button (worth every penny!) - https://amzn.to/3DtSYfZ")
![Easy, accurate, repeatable tracksaw cuts. [video 550]](https://i.ytimg.com/vi/vHX5j2820nk/hqdefault.jpg "Easy, accurate, repeatable tracksaw cuts. [video 550]
In this shorter video I’m sharing a technique I’ve developed for making repeatable tracksaw cuts that are quick, easy and accurate just using accessories you already have. Enjoy!
++++++++
Sign up for the newsletter at 10minuteworkshop.email or 10MW.email for free factsheets and lots more
Visit the 10MinuteWorkshop store for the Loose Tenon Jig 30 and ‘Square Enough’ assembly guides at www.10minute.shop
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I may earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at benchdogs.co.uk
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos and playlists of interest:-
Tracksaw Workshop playlist - http://bit.ly/TracksawWorkshop
Base Cabinet Basics - https://youtu.be/XQNeiPvEQ1I
All about doors playlist - http://bit.ly/AllAboutDoors
All about hinges playlist - http://bit.ly/allabouthinges
Two easy doors - https://youtu.be/jwGvYsvdCg4
Cabinetry Basics P1 - https://youtu.be/3N_T-YpkBCg
Loose Tenon Basics - https://youtu.be/t86QGUn7dAI
Why Buy This Saw? - https://youtu.be/u7H5On0j_5c
Festool’s Big Mistake? - https://youtu.be/Wc0MOV3HtjI
10MW Loose Tenon Jig 30 - https://youtu.be/enGVfEwD-Tc
Ikea Curtain track DIY MFT - https://youtu.be/223QALIbnRc
All About Drawers playlist - https://bit.ly/AllAboutDrawers
Jointing systems playlist - http://bit.ly/JointingSystems
+++++++++
Useful links:
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at benchdogs.co.uk
Benchdogs precision squares (gifted)- https://benchdogs.co.uk/products/stainless-steel-square-300?ref=1x_p0bagtnr
Benchdogs precision rulers (gifted) - https://benchdogs.co.uk/collections/rulers?ref=1x_p0bagtnr
Benchdogs carpenter’s square (gifted) - https://benchdogs.co.uk/products/175mm-carpenter-square?ref=1x_p0bagtnr)
Benchdogs precision triangle/square (gifted) - https://bit.ly/precisiontriangle
Hultafors Talmeter tape measure - https://amzn.to/3rdewuP
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com")
![$10 Tool Tote [video 567]](https://i.ytimg.com/vi/vhW04TJCgMU/hqdefault.jpg "$10 Tool Tote [video 567]
In this one I’m making a simple little plywood #tool-tote with a twist - the bottom tray can be left behind, or with literally a 180 turn it can be picked up in the stack, and the whole things fits in a #Festool t-loc #systainer, too. Enjoy!
Like the look of the 10MinuteWorkshop MultiJig? Register an interest at www.10minutejigs.com (redirects) or directly at https://tenminuteworkshop.myflodesk.com/is2eafpl87
+++++++++
Join the 10MinuteWorkshop Plus community, more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
+++++++++
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email to stay in touch and get the all the 10MW factsheets, included in the next issue.
Can’t wait? Become a 10minuteworkshop Plus member* and get the factsheets, free plans and other exclusive member content right away - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
*Behind the Scenes, Marking Out and At the Bench members have instant access as part of their subscription
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
+++++++++
Visit the 10MinuteWorkshop store for the DIY SYS-TOTE plans, at www.10minute.shop or in the product shelf directly beneath this video.
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I will earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
+++++++++
Other videos and playlists of interest:-
My cheap nailer and compressor - https://youtu.be/eJo3JMkv3JE
Sealey does it again - https://youtu.be/6dDVX5Pxsrk
Festool ETSEC 150/5 - https://youtu.be/Hieq1PTITWI
Tracksaw Launchpad - https://youtu.be/z8Jp9oSXGh4
Oak and Birch ply drawers - https://youtu.be/tIbJ-93TMZw
+++++++++
Useful links:
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Benchdogs products gifted without obligation:-
Benchdogs precision rulers (gifted) - https://benchdogs.co.uk/collections/rulers?ref=1x_p0bagtnr
Benchdogs precision squares (gifted)- https://benchdogs.co.uk/products/stainless-steel-square-300?ref=1x_p0bagtnr
Benchdogs CSC SYS Fence (gifted) - https://benchdogs.co.uk/collections/csc-fence-and-adaptor-plate/products/csc-fence-and-adaptor-plate?ref=1x_p0bagtnr
Hyundai 8-litre quiet compressor - https://amzn.to/398TyB7 (
Silverline 18g nailer - https://amzn.to/3sfcZ2S
18g nail mixed pack - https://amzn.to/3lGRIfW
Silverline nailer/stapler - https://amzn.to/3rGorF4
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH
Benchdogs rail square - https://bit.ly/bench-dogs
Benchdogs precision triangle/square - https://bit.ly/precisiontriangle")
![Workshop Clearout & Basic Wall Cabinets [video 461]](https://i.ytimg.com/vi/vthcuwE6bM4/hqdefault.jpg "Workshop Clearout & Basic Wall Cabinets [video 461]
You know how you start something sometimes and it gets a little out of hand? Yeah, that. So I’m having a bit of a #workshop #clearout and #makeover, and in this video I deal with some wall cabinets, with shelves to follow. Enjoy!
Oh, yeah - and while those MDF shelves are plenty strong enough, I dont actually recommend hanging off them unless youre 100% positive of the fixing into the wall. 👍
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos mentioned / recent popular videos:-
Workshop shelves & cabinets - https://youtu.be/iaB_CL5md8U
Basic Plywood Boxes - https://youtu.be/li5AIXw3XPE
Cabinetry basics P1 - https://youtu.be/3N_T-YpkBCg
Ultimate DIY loose-tenon jig - https://youtu.be/IzKHZe0YCGY
+++++++++
For gift ideas, visit my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video:-
Corner brackets/plates - https://amzn.to/3WblNFa (US: https://amzn.to/3iDCsTV)
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![Marking out - not so basic! [video 588]](https://i.ytimg.com/vi/vyGpC4HoZgU/hqdefault.jpg "Marking out - not so basic! [video 588]
Following on from Marking Out Basics, in this one I share my process for marking out cabinet components that arent designed to make life easy. Enjoy!
Table of Contents:
00:00 Introduction
01:15 Its still a cabinet...
02:54 Marking centres
04:17 Marking sides
05:30 Top & base
07:26 Shelf centres
08:21 Outro
Related content:
Marking Out Basics - https://youtu.be/YZ3ExdMX82A
Base cabinet basics - https://bit.ly/BaseCabBasics
Cabinetry basics - http://bit.ly/CabinetryBasics
Jointing systems - http://bit.ly/JointingSystems
Cabinet tips - http://bit.ly/CabinertTips
All about doors - http://bit.ly/AllAboutDoors
Client work, bedroom furniture - http://bit.ly/ClientBedroomFurniture
Client work, shelves and storage - http://bit.ly/ClientShelvesAndStorage
Oak and Birch Ply drawers - https://youtu.be/tIbJ-93TMZw
Sharp and a little bit Scary - https://youtu.be/EBJZlI9IVlI
No going back (Our Big Build primer) - https://youtu.be/eULepp_7CIM
DIY SYS-TOTE - https://youtu.be/vhW04TJCgMU
Newsletter and memberships:
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email to stay in touch.
Join the conversation as a 10minuteworkshop Plus member and get the factsheets, free plans* and other exclusive member content right away - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
*Behind the Scenes, Marking Out and At the Bench members have instant access as part of their subscription
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Store:
Visit the 10MinuteWorkshop store for 10MW Products and project plans, at www.10minute.shop or in the product shelf directly beneath this video.
Affiliate Links:
As an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I will earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Bahco combi squares - https://amzn.to/3B6tbwL
Hinge template (saddle square) - https://amzn.to/4gurF7G")
