Uploaded April 2017 | Updated November 2026, 3 hours ago
How to build a planter stand. How to make multi-use planters. First of all DO NOT I repeat DO NOT cut into a gas/propane tank unless you know what you are doing! Even though the tank may appear empty there is a risk of explosion and fire. The tanks I used were empty and had their valves removed. They were then filled with water to remove any remaining gas, emptied then refilled again to be sure. The tanks were then left in the open air for a few weeks to vent before being used. YOU HAVE BEEN WARNED!
FYI : It has since been brought to my attention that it may be frowned upon to cut open or modify a gas/propane cylinders in some parts of the world! Be sure to check and follow your local rules and regulations.
Here are some of the many YouTube tutorials I watched before attempting it:
youtu.be/bL1TPvQRZvk
youtu.be/uLEbjlLvLrI
youtu.be/IXQ_umpZajo
youtu.be/wC5yDt0bYkU
The 2 inch (50mm) tube steel I used for the rest of the parts came from an old TV aerial that was once attached to a house and the smaller bits came from a disused poly tunnel.
Here is a link to the IKEA lanterns I used for one of the stands:
ikea.com/ie/en/products/decoration/candles-candle-holders/borrby-lantern-for-block-candle-in-outdoor-black-art-10156109
I put stones in the bottom of the stand for added stability and also for drainage.
As some of you may have already noticed there is some Photoshop work at the end of the video just to show how hopefully the planters will look when they bloom.
Music: YouTube audio library.
How to build a planter stand. How to make multi-use planters. First of all DO NOT I repeat DO NOT cut into a gas/propane tank unless you know what you are doing! Even though the tank may appear empty there is a risk of explosion and fire. The tanks I used were empty and had their valves removed. They were then filled with water to remove any remaining gas, emptied then refilled again to be sure. The tanks were then left in the open air for a few weeks to vent before being used. YOU HAVE BEEN WARNED!
FYI : It has since been brought to my attention that it may be frowned upon to cut open or modify a gas/propane cylinders in some parts of the world! Be sure to check and follow your local rules and regulations.
Here are some of the many YouTube tutorials I watched before attempting it:
youtu.be/bL1TPvQRZvk
youtu.be/uLEbjlLvLrI
youtu.be/IXQ_umpZajo
youtu.be/wC5yDt0bYkU
The 2 inch (50mm) tube steel I used for the rest of the parts came from an old TV aerial that was once attached to a house and the smaller bits came from a disused poly tunnel.
Here is a link to the IKEA lanterns I used for one of the stands:
ikea.com/ie/en/products/decoration/candles-candle-holders/borrby-lantern-for-block-candle-in-outdoor-black-art-10156109
I put stones in the bottom of the stand for added stability and also for drainage.
As some of you may have already noticed there is some Photoshop work at the end of the video just to show how hopefully the planters will look when they bloom.
Music: YouTube audio library.










