Uploaded July 2026 | Updated November 2026, 6 hours ago
* Correct installation of the studded spacer
* Proper lug nut torque sequence and specifications. These specs only apply to Aspira.
* Final safety checks and best practices
Aspira Studded Wheel Spacers are precision CNC-machined from high-strength aluminum and feature pre-installed wheel studs for a secure, hub-centric fit designed specifically for Tesla vehicles.
⚠️ **Important:** Always verify that your wheels have adequate thread engagement and clearance before driving. Retorque your lug nuts after approximately 25–50 miles (40–80 km) of driving.
---
### Products Featured
✔ Aspira Studded Wheel Spacers for Tesla Model 3 & Model Y
Shop Aspira products:
🌐 zevcentric.com
🌐 aspiraautodesign.com
---
### Tools Used
* Floor Jack
* Jack Pad
* 19mm and 21mm Socket
* Torque Wrench
* Breaker Bar or Impact Wrench
---
### Torque Specification
Tesla Model 3 & Model Y Lug Nuts:
**129 lb-ft (175 Nm)**
---
If you found this installation guide helpful, please:
👍 Like the video
💬 Leave your questions in the comments
🔔 Subscribe for more Tesla installs, suspension upgrades, wheel fitment, and EV performance content.
Follow us:
Instagram: instagram.com/zevcentric
Website: zevcentric.com
#Tesla #TeslaModel3 #TeslaModelY #WheelSpacers #Aspira #AspiraForged #TeslaMods #TeslaPerformance #TeslaDIY #Model3Performance #TeslaAccessories #EVMods #WheelFitment #CarDIY #InstallationTutorial
* Correct installation of the studded spacer
* Proper lug nut torque sequence and specifications. These specs only apply to Aspira.
* Final safety checks and best practices
Aspira Studded Wheel Spacers are precision CNC-machined from high-strength aluminum and feature pre-installed wheel studs for a secure, hub-centric fit designed specifically for Tesla vehicles.
⚠️ **Important:** Always verify that your wheels have adequate thread engagement and clearance before driving. Retorque your lug nuts after approximately 25–50 miles (40–80 km) of driving.
---
### Products Featured
✔ Aspira Studded Wheel Spacers for Tesla Model 3 & Model Y
Shop Aspira products:
🌐 zevcentric.com
🌐 aspiraautodesign.com
---
### Tools Used
* Floor Jack
* Jack Pad
* 19mm and 21mm Socket
* Torque Wrench
* Breaker Bar or Impact Wrench
---
### Torque Specification
Tesla Model 3 & Model Y Lug Nuts:
**129 lb-ft (175 Nm)**
---
If you found this installation guide helpful, please:
👍 Like the video
💬 Leave your questions in the comments
🔔 Subscribe for more Tesla installs, suspension upgrades, wheel fitment, and EV performance content.
Follow us:
Instagram: instagram.com/zevcentric
Website: zevcentric.com
#Tesla #TeslaModel3 #TeslaModelY #WheelSpacers #Aspira #AspiraForged #TeslaMods #TeslaPerformance #TeslaDIY #Model3Performance #TeslaAccessories #EVMods #WheelFitment #CarDIY #InstallationTutorial






The goal of these shims is simple: **reduce excessive negative camber, improve tire wear, and get your rear alignment back into a more street-friendly range.**
### WHICH SHIM SHOULD YOU USE?
⚫ **BLACK “THICKBOY” CAMBER SHIMS**
These provide the greatest amount of camber correction and are generally the best choice for more aggressively lowered cars.
Recommended for:
• **All Model X Plaid and Long Range vehicles**
• **Model S Plaid or Long Range** with N2itive lowering links set to approximately **-7 or more**
If your car sits low and you’re seeing excessive rear negative camber, the Black THICKBOY shim is likely the direction you’ll want to go.
### GRAY CAMBER SHIMS
The thinner **gray shims** provide less correction and can be a better fit for vehicles that aren’t lowered as aggressively.
They can be considered for:
• **Model X Long Range without lowering links**
• Cars needing only a smaller amount of camber correction
The correct shim depends on **ride height, lowering-link setting, existing camber, and the alignment target you’re trying to achieve**, so we always recommend checking the alignment before and after installation.
### WHY REDUCE EXCESSIVE NEGATIVE CAMBER?
Too much rear negative camber can contribute to:
🛞 Accelerated inside tire wear
💰 Premature tire replacement
📐 Alignment values outside the ideal street range
🚗 Reduced usable tire life
For a heavy, high-performance vehicle like the **Model S Plaid or Model X Plaid**, protecting those expensive tires can make this a very worthwhile upgrade.
In this video, we explain the difference between the shim options, who should consider the **Black THICKBOY shims**, and how lowering-link settings can change the amount of camber correction your Tesla may need.
👍 LIKE the video if this helped
💬 COMMENT with your Model S/X, lowering-link setting, and current camber numbers
🔔 SUBSCRIBE for more Tesla alignment, suspension, tire-wear, and performance tech
Visit **ZEVcentric.com** for Tesla suspension, alignment, wheel, brake, and chassis upgrades.
#Tesla #ModelXPlaid #ModelX #ModelSPlaid #ModelS #TeslaPlaid #TeslaAlignment #Camber #CamberShims #NegativeCamber #TireWear #TeslaTireWear #TeslaSuspension #LoweringLinks #N2itive #TeslaMods #TeslaPerformance #EVPerformance #WheelAlignment #ZEVcentric STOP Killing Your Model X Plaid Tires — Cheap Camber Fix](https://i.ytimg.com/vi/s1J30Rmkx-Q/mqdefault.jpg)

**MPP Alignment Arms**
[https://zevcentric.com/collections/alignment-arms?sort_by=best-selling&filter.p.vendor=MPP](https://zevcentric.com/collections/alignment-arms?sort_by=best-selling&filter.p.vendor=MPP)
**Öhlins DFV Road & Track for Model 3 / Model Y**
[https://zevcentric.com/products/ohlins-dfv-road-and-track-model-3-y](https://zevcentric.com/products/ohlins-dfv-road-and-track-model-3-y)
**Aspira Forged Wheels for Model 3**
[https://zevcentric.com/collections/model-3-wheels?sort_by=best-selling&filter.p.vendor=Aspira](https://zevcentric.com/collections/model-3-wheels?sort_by=best-selling&filter.p.vendor=Aspira)
If you autocross or track a Tesla, the details matter. Alignment, camber, ride height, wheel and tire setup, damping, and overall balance all affect how the car behaves when you’re actually competing.
This weekend definitely wasn’t what we planned, but getting into two customer cars gave us a chance to see how those setups worked under real competition conditions.
Subscribe for more Tesla autocross, suspension development, wheel fitment, alignment testing, track builds, and real-world chassis setup.
ZEVcentric
Fremont, California
[https://zevcentric.com](https://zevcentric.com)
#SCCA #ProSolo #Autocross #TeslaModel3 #Model3Performance #TeslaAutocross #CrowsLanding #TeslaMotorsports #Ohlins #MountainPassPerformance #AspiraForged #TeslaSuspension #TeslaWheels #ZEVcentric Our Tesla Broke at SCCA ProSolo… So We Raced Our Customers’ Cars](https://i.ytimg.com/vi/saYwSNosMeU/mqdefault.jpg)



