Uploaded August 2026 | Updated November 2026, 6 hours ago
The wait is over. **JRZ race dampers for the Tesla Model 3 and Model Y are officially available for PREORDER through ZEVcentric.** 🏁⚡
**Aspira x ZEVcentric x JRZ** have collaborated to bring one of the most comprehensive motorsport damper systems available for the Tesla platform.
These are serious, motorsport-derived dampers designed for drivers looking for significantly more chassis control, adjustability, consistency, and tuning capability on track.
🔥 **PREORDER / ORDER HERE:**
zevcentric.com/products/aspira-x-jrz-rs-pro-pro-3-teslas-ultimate-race-damper
⚠️ **SPECIAL ORDER INFORMATION**
These systems are special ordered from JRZ in the Netherlands and are subject to production lead times.
**Payment is required via Zelle, ACH, or wire transfer.**
Contact ZEVcentric if you need help selecting the correct damper configuration, spring rates, or options for your build.
## JRZ RS PRO — DOUBLE ADJUSTABLE
The RS Pro provides independent adjustment of compression and rebound damping.
• 14 clicks compression
• 21 clicks rebound
• External reservoirs
• Adjustable ride height
• Adjustable nitrogen gas pressure
• Spherical bearings
• Motorsport-focused valving
• Front and rear upper mounts included
• Front spring thrust bearings included
The RS Pro is a great choice for serious street builds, autocross, HPDE, canyon driving, and track-day cars where high-level tuning capability is desired without unnecessary complexity.
## JRZ RS PRO 3 — TRIPLE ADJUSTABLE
The RS Pro 3 adds independent high-speed and low-speed compression adjustment for even greater chassis control.
• 14 clicks HIGH-SPEED compression
• 8 clicks LOW-SPEED compression
• 21 clicks rebound
• External reservoirs
• Adjustable ride height
• Adjustable nitrogen gas pressure
• Spherical bearings
• Motorsport-focused valving
• Front and rear upper mounts included
• Front spring thrust bearings included
The RS Pro 3 is intended for advanced track builds, Time Attack, competition cars, serious autocross setups, and drivers working with detailed suspension tuning or race engineering.
## SPRINGS PURCHASED SEPARATELY
This allows us to configure the suspension around the actual use of the vehicle rather than forcing every car into the same spring rate.
We have tested spring rates ranging from approximately **8 kg/mm to 23 kg/mm**.
• **Rear:** Helper springs are required with the main spring
• **Front:** Helper springs may be needed with spring rates above approximately 12 kg/mm
• 60mm front spring ID is standard
• Rear spring-height adjuster kit is optional
• Quick disconnects are optional
## WHY JRZ?
Tesla Model 3 and Model Y track cars create unique suspension demands due to their weight, instant torque, high cornering loads, modern high-grip tires, and the heat generated during extended track sessions.
JRZ dampers provide precise control over:
🏁 Braking and weight transfer
🏁 Turn-in response
🏁 Mid-corner chassis balance
🏁 Acceleration
🏁 Curbs and surface changes
🏁 High-speed transitions
🏁 Tire contact and grip
One of the biggest advantages is that JRZ dampers are **fully serviceable, rebuildable, and revalvable**, allowing the suspension to evolve as your car changes.
Change tires. Change aero. Change spring rates. Change the purpose of the car.
The dampers can evolve with the build.
### AVAILABLE NOW FOR PREORDER
**JRZ RS Pro — Double Adjustable**
**JRZ RS Pro 3 — Triple Adjustable**
Available for Tesla Model 3 and Model Y applications through ZEVcentric.
👉 **ORDER / DETAILS:**
zevcentric.com/products/aspira-x-jrz-rs-pro-pro-3-teslas-ultimate-race-damper
If you're building a serious Tesla track car, contact ZEVcentric and we can help configure the system around your vehicle, tires, spring rates, and intended use.
Thanks for supporting ZEVcentric and the continued development of serious motorsport solutions for the Tesla platform. ⚡🏁
#JRZ #JRZSuspension #Tesla #TeslaModel3 #TeslaModelY #TeslaPerformance #Model3Performance #TeslaTrackCar #TrackTesla #TeslaRacing #EVPerformance #EVRacing #RaceSuspension #RaceShocks #Coilovers #TrackCar #TimeAttack #Autocross #HPDE #SuspensionTuning #Motorsport #Aspira #ZEVcentric
The wait is over. **JRZ race dampers for the Tesla Model 3 and Model Y are officially available for PREORDER through ZEVcentric.** 🏁⚡
**Aspira x ZEVcentric x JRZ** have collaborated to bring one of the most comprehensive motorsport damper systems available for the Tesla platform.
These are serious, motorsport-derived dampers designed for drivers looking for significantly more chassis control, adjustability, consistency, and tuning capability on track.
🔥 **PREORDER / ORDER HERE:**
zevcentric.com/products/aspira-x-jrz-rs-pro-pro-3-teslas-ultimate-race-damper
⚠️ **SPECIAL ORDER INFORMATION**
These systems are special ordered from JRZ in the Netherlands and are subject to production lead times.
**Payment is required via Zelle, ACH, or wire transfer.**
Contact ZEVcentric if you need help selecting the correct damper configuration, spring rates, or options for your build.
## JRZ RS PRO — DOUBLE ADJUSTABLE
The RS Pro provides independent adjustment of compression and rebound damping.
• 14 clicks compression
• 21 clicks rebound
• External reservoirs
• Adjustable ride height
• Adjustable nitrogen gas pressure
• Spherical bearings
• Motorsport-focused valving
• Front and rear upper mounts included
• Front spring thrust bearings included
The RS Pro is a great choice for serious street builds, autocross, HPDE, canyon driving, and track-day cars where high-level tuning capability is desired without unnecessary complexity.
## JRZ RS PRO 3 — TRIPLE ADJUSTABLE
The RS Pro 3 adds independent high-speed and low-speed compression adjustment for even greater chassis control.
• 14 clicks HIGH-SPEED compression
• 8 clicks LOW-SPEED compression
• 21 clicks rebound
• External reservoirs
• Adjustable ride height
• Adjustable nitrogen gas pressure
• Spherical bearings
• Motorsport-focused valving
• Front and rear upper mounts included
• Front spring thrust bearings included
The RS Pro 3 is intended for advanced track builds, Time Attack, competition cars, serious autocross setups, and drivers working with detailed suspension tuning or race engineering.
## SPRINGS PURCHASED SEPARATELY
This allows us to configure the suspension around the actual use of the vehicle rather than forcing every car into the same spring rate.
We have tested spring rates ranging from approximately **8 kg/mm to 23 kg/mm**.
• **Rear:** Helper springs are required with the main spring
• **Front:** Helper springs may be needed with spring rates above approximately 12 kg/mm
• 60mm front spring ID is standard
• Rear spring-height adjuster kit is optional
• Quick disconnects are optional
## WHY JRZ?
Tesla Model 3 and Model Y track cars create unique suspension demands due to their weight, instant torque, high cornering loads, modern high-grip tires, and the heat generated during extended track sessions.
JRZ dampers provide precise control over:
🏁 Braking and weight transfer
🏁 Turn-in response
🏁 Mid-corner chassis balance
🏁 Acceleration
🏁 Curbs and surface changes
🏁 High-speed transitions
🏁 Tire contact and grip
One of the biggest advantages is that JRZ dampers are **fully serviceable, rebuildable, and revalvable**, allowing the suspension to evolve as your car changes.
Change tires. Change aero. Change spring rates. Change the purpose of the car.
The dampers can evolve with the build.
### AVAILABLE NOW FOR PREORDER
**JRZ RS Pro — Double Adjustable**
**JRZ RS Pro 3 — Triple Adjustable**
Available for Tesla Model 3 and Model Y applications through ZEVcentric.
👉 **ORDER / DETAILS:**
zevcentric.com/products/aspira-x-jrz-rs-pro-pro-3-teslas-ultimate-race-damper
If you're building a serious Tesla track car, contact ZEVcentric and we can help configure the system around your vehicle, tires, spring rates, and intended use.
Thanks for supporting ZEVcentric and the continued development of serious motorsport solutions for the Tesla platform. ⚡🏁
#JRZ #JRZSuspension #Tesla #TeslaModel3 #TeslaModelY #TeslaPerformance #Model3Performance #TeslaTrackCar #TrackTesla #TeslaRacing #EVPerformance #EVRacing #RaceSuspension #RaceShocks #Coilovers #TrackCar #TimeAttack #Autocross #HPDE #SuspensionTuning #Motorsport #Aspira #ZEVcentric




The goal of these shims is simple: **reduce excessive negative camber, improve tire wear, and get your rear alignment back into a more street-friendly range.**
### WHICH SHIM SHOULD YOU USE?
⚫ **BLACK “THICKBOY” CAMBER SHIMS**
These provide the greatest amount of camber correction and are generally the best choice for more aggressively lowered cars.
Recommended for:
• **All Model X Plaid and Long Range vehicles**
• **Model S Plaid or Long Range** with N2itive lowering links set to approximately **-7 or more**
If your car sits low and you’re seeing excessive rear negative camber, the Black THICKBOY shim is likely the direction you’ll want to go.
### GRAY CAMBER SHIMS
The thinner **gray shims** provide less correction and can be a better fit for vehicles that aren’t lowered as aggressively.
They can be considered for:
• **Model X Long Range without lowering links**
• Cars needing only a smaller amount of camber correction
The correct shim depends on **ride height, lowering-link setting, existing camber, and the alignment target you’re trying to achieve**, so we always recommend checking the alignment before and after installation.
### WHY REDUCE EXCESSIVE NEGATIVE CAMBER?
Too much rear negative camber can contribute to:
🛞 Accelerated inside tire wear
💰 Premature tire replacement
📐 Alignment values outside the ideal street range
🚗 Reduced usable tire life
For a heavy, high-performance vehicle like the **Model S Plaid or Model X Plaid**, protecting those expensive tires can make this a very worthwhile upgrade.
In this video, we explain the difference between the shim options, who should consider the **Black THICKBOY shims**, and how lowering-link settings can change the amount of camber correction your Tesla may need.
👍 LIKE the video if this helped
💬 COMMENT with your Model S/X, lowering-link setting, and current camber numbers
🔔 SUBSCRIBE for more Tesla alignment, suspension, tire-wear, and performance tech
Visit **ZEVcentric.com** for Tesla suspension, alignment, wheel, brake, and chassis upgrades.
#Tesla #ModelXPlaid #ModelX #ModelSPlaid #ModelS #TeslaPlaid #TeslaAlignment #Camber #CamberShims #NegativeCamber #TireWear #TeslaTireWear #TeslaSuspension #LoweringLinks #N2itive #TeslaMods #TeslaPerformance #EVPerformance #WheelAlignment #ZEVcentric STOP Killing Your Model X Plaid Tires — Cheap Camber Fix](https://i.ytimg.com/vi/s1J30Rmkx-Q/mqdefault.jpg)

**MPP Alignment Arms**
[https://zevcentric.com/collections/alignment-arms?sort_by=best-selling&filter.p.vendor=MPP](https://zevcentric.com/collections/alignment-arms?sort_by=best-selling&filter.p.vendor=MPP)
**Öhlins DFV Road & Track for Model 3 / Model Y**
[https://zevcentric.com/products/ohlins-dfv-road-and-track-model-3-y](https://zevcentric.com/products/ohlins-dfv-road-and-track-model-3-y)
**Aspira Forged Wheels for Model 3**
[https://zevcentric.com/collections/model-3-wheels?sort_by=best-selling&filter.p.vendor=Aspira](https://zevcentric.com/collections/model-3-wheels?sort_by=best-selling&filter.p.vendor=Aspira)
If you autocross or track a Tesla, the details matter. Alignment, camber, ride height, wheel and tire setup, damping, and overall balance all affect how the car behaves when you’re actually competing.
This weekend definitely wasn’t what we planned, but getting into two customer cars gave us a chance to see how those setups worked under real competition conditions.
Subscribe for more Tesla autocross, suspension development, wheel fitment, alignment testing, track builds, and real-world chassis setup.
ZEVcentric
Fremont, California
[https://zevcentric.com](https://zevcentric.com)
#SCCA #ProSolo #Autocross #TeslaModel3 #Model3Performance #TeslaAutocross #CrowsLanding #TeslaMotorsports #Ohlins #MountainPassPerformance #AspiraForged #TeslaSuspension #TeslaWheels #ZEVcentric Our Tesla Broke at SCCA ProSolo… So We Raced Our Customers’ Cars](https://i.ytimg.com/vi/saYwSNosMeU/mqdefault.jpg)





