Uploaded May 2021 | Updated September 2026, 1 day ago

---

Step-by-step tutorial on how to properly install and activate the MPM500 pneumatic module on your Meca500 (R3) industrial robot arm.

The MPM500 module features two 3-way, 2-position normally closed solenoid valves, allowing direct software control over pneumatic grippers and end-effectors directly from the robot's web interface.

🛠️ Installation Steps Covered:
• Powering off the robot safely
• Mounting & securing the module with a 2.5 mm Allen key
• Connecting electrical cables and pneumatic fittings
• Activating and homing via the Web GUI

📌 Chapters:
[00:00] - Introduction & Safety Warning
[00:17] - Mounting MPM500 on Robot Wrist
[00:28] - Securing Screws & Electrical Cable
[00:50] - Installing Pneumatic Ports & Silencer
[01:17] - Web Interface Activation & Verification

📖 Technical Datasheet & Specifications:resources.mecademic.com/en/doc/MC-UM-MECA500/latest/manual/index.html

❓ Need technical support? mecademic.com/contact-us

#MPM500 #Meca500