Uploaded February 2026 | Updated September 2026, 3 weeks ago
Full install video here: youtu.be/r5PGj7wLHDI
Parts linked in the description below!
If this video was helpful, consider chipping in a few bucks to support the channel: provobeast.com/donate
Help support the channel by picking up a T-shirt! provobeast.com/product-page/provo-beast-unisex-t-shirts
Watch a full tutorial as a 2016 Ford F150 will have a new bass amp installed to an aftermarket radio. We will assemble a full plug & play harness for an easy install for extra bass missing from the factory audio system.
This video applies to Ford F-150 models for years 2015, 2016, 2017, 2018, 2019, and 2020. This video also includes amplifier rack assembly, factory radio integration and wiring, and full installation.
***NOTE: this video is specifically for Ford trucks WITHOUT the B&O OR SONY audio trims. If you have the factory amplifier, you'll need to either install a Pac AmpPro wiring kit (linked below) or tap into the OEM subwoofer wiring with a high-power line out converter. We can link all those various parts below.
For a radio install video, click here:
youtu.be/esYHu6h9q0g
For the front door install video, click here:
youtu.be/TKrt-h21q6A
For the rear door speaker install video, click here:
youtu.be/IjmETGaEpjs
If you have any questions, leave a comment below! Be sure to like and subscribe!
Parts Used in this Video (Amazon Associate Paid Links):
*Skar Audio 800.1d Mono Amp: amzn.to/33vT0FY
--Recommended amp: amzn.to/4n40q64
*Skar Audio F150 Loaded Subwoofer enclosure (See below for options)
*Single 12" Ported: amzn.to/4qzZTdW
*Skar Audio 4 Gauge OFC wiring kit: amzn.to/31f0r2U
*Pac LPH-FD21 Radio T-harness (non-Sony / B&O): amzn.to/4f5ShLg
*Pac LP7-2 Line Out Converter (non-Sony / B&O): amzn.to/33lRh5u
--OR a Fully assembled T-harness kit with different LOC options made by me:
provobeast.com/product-page/2011-2020-ford-add-an-amplifier-t-harness
*Clean wire ruler (like seen in the video): provobeast.com/product-page/clean-wiring-installer-ruler
**IF you have SONY / B&O, you can use this T-harness & LOC kits instead:
*(2015 - 2017 SONY): Pac APSUB-FD21: amzn.to/4qyrkoo
*(2018 - 2020 B&O): No pac sub only harness is available. Recommend this T-harness kit from Sounds Good Stereo (non-paid): tinyurl.com/yck99323
**Amplifier Mount Options**
*(Make your own) 12x16x1/8" ABS plastic panel: amzn.to/4nQLWYl
*Sounds Good Stereo Small Mount (non-paid): tinyurl.com/5d4bdxyu
*Sounds Good Stereo Medium Mount (non-paid): tinyurl.com/4bktfeph
*Sounds Good Stereo Under-seat Mount (non-paid): tinyurl.com/bdhfhukp
**Skar loaded enclosures**
*Single 10" Ported (Extended SuperCab ONLY): amzn.to/3OF13qZ
*Dual 10" Ported (Extended SuperCab ONLY): amzn.to/4agTKyq
*Dual 10" Ported: amzn.to/4qvHApZ
*Dual 10" Sealed: amzn.to/4rNG0AS
*Single 12" Ported: amzn.to/4qzZTdW
*Dual 12" Ported: amzn.to/4aAfPHb
*Dual 12" Sealed: amzn.to/4aN17h0
*Dual 8" Ported: amzn.to/4tANh8Z
(Skar also makes empty enclosures in various sizes as well on their website)
*Disclosure: As an Amazon Associate I earn from qualifying purchases*
Full install video here: youtu.be/r5PGj7wLHDI
Parts linked in the description below!
If this video was helpful, consider chipping in a few bucks to support the channel: provobeast.com/donate
Help support the channel by picking up a T-shirt! provobeast.com/product-page/provo-beast-unisex-t-shirts
Watch a full tutorial as a 2016 Ford F150 will have a new bass amp installed to an aftermarket radio. We will assemble a full plug & play harness for an easy install for extra bass missing from the factory audio system.
This video applies to Ford F-150 models for years 2015, 2016, 2017, 2018, 2019, and 2020. This video also includes amplifier rack assembly, factory radio integration and wiring, and full installation.
***NOTE: this video is specifically for Ford trucks WITHOUT the B&O OR SONY audio trims. If you have the factory amplifier, you'll need to either install a Pac AmpPro wiring kit (linked below) or tap into the OEM subwoofer wiring with a high-power line out converter. We can link all those various parts below.
For a radio install video, click here:
youtu.be/esYHu6h9q0g
For the front door install video, click here:
youtu.be/TKrt-h21q6A
For the rear door speaker install video, click here:
youtu.be/IjmETGaEpjs
If you have any questions, leave a comment below! Be sure to like and subscribe!
Parts Used in this Video (Amazon Associate Paid Links):
*Skar Audio 800.1d Mono Amp: amzn.to/33vT0FY
--Recommended amp: amzn.to/4n40q64
*Skar Audio F150 Loaded Subwoofer enclosure (See below for options)
*Single 12" Ported: amzn.to/4qzZTdW
*Skar Audio 4 Gauge OFC wiring kit: amzn.to/31f0r2U
*Pac LPH-FD21 Radio T-harness (non-Sony / B&O): amzn.to/4f5ShLg
*Pac LP7-2 Line Out Converter (non-Sony / B&O): amzn.to/33lRh5u
--OR a Fully assembled T-harness kit with different LOC options made by me:
provobeast.com/product-page/2011-2020-ford-add-an-amplifier-t-harness
*Clean wire ruler (like seen in the video): provobeast.com/product-page/clean-wiring-installer-ruler
**IF you have SONY / B&O, you can use this T-harness & LOC kits instead:
*(2015 - 2017 SONY): Pac APSUB-FD21: amzn.to/4qyrkoo
*(2018 - 2020 B&O): No pac sub only harness is available. Recommend this T-harness kit from Sounds Good Stereo (non-paid): tinyurl.com/yck99323
**Amplifier Mount Options**
*(Make your own) 12x16x1/8" ABS plastic panel: amzn.to/4nQLWYl
*Sounds Good Stereo Small Mount (non-paid): tinyurl.com/5d4bdxyu
*Sounds Good Stereo Medium Mount (non-paid): tinyurl.com/4bktfeph
*Sounds Good Stereo Under-seat Mount (non-paid): tinyurl.com/bdhfhukp
**Skar loaded enclosures**
*Single 10" Ported (Extended SuperCab ONLY): amzn.to/3OF13qZ
*Dual 10" Ported (Extended SuperCab ONLY): amzn.to/4agTKyq
*Dual 10" Ported: amzn.to/4qvHApZ
*Dual 10" Sealed: amzn.to/4rNG0AS
*Single 12" Ported: amzn.to/4qzZTdW
*Dual 12" Ported: amzn.to/4aAfPHb
*Dual 12" Sealed: amzn.to/4aN17h0
*Dual 8" Ported: amzn.to/4tANh8Z
(Skar also makes empty enclosures in various sizes as well on their website)
*Disclosure: As an Amazon Associate I earn from qualifying purchases*
