Uploaded September 2024 | Updated September 2026, 2 hours ago
Dwyer's Series A-320 Instrument Enclosures protect various instruments in all applications. In this video, we'll be showing you how to install a Series 2000 Magnehelic® gage into a stainless steel enclosure.
Steps:
1. Loosen the screws in all 4 corners and separate the front of the enclosure from the back. 0:36
2. Screw the back section of the enclosure to the wall, panel, or other mounting surface. 0:53
3. Insert the gage into the cutout and using the mounting hardware included with your gage, install the panel mount screws on the back. 1:10
4. Tighten the long screws against the back of the front cover until the gage is secure. 1:46
5. Attach the tubes from inside the enclosure to the high and low ports of the gage. 2:08
6. Reassemble the enclosure on the wall or panel, and reinstall the a screws into the four corners of the front cover. 2:39
To learn more or order, please visit: dwyer-inst.com/Product/Pressure/DifferentialPressure/Gages/SeriesA-320
Dwyer's Series A-320 Instrument Enclosures protect various instruments in all applications. In this video, we'll be showing you how to install a Series 2000 Magnehelic® gage into a stainless steel enclosure.
Steps:
1. Loosen the screws in all 4 corners and separate the front of the enclosure from the back. 0:36
2. Screw the back section of the enclosure to the wall, panel, or other mounting surface. 0:53
3. Insert the gage into the cutout and using the mounting hardware included with your gage, install the panel mount screws on the back. 1:10
4. Tighten the long screws against the back of the front cover until the gage is secure. 1:46
5. Attach the tubes from inside the enclosure to the high and low ports of the gage. 2:08
6. Reassemble the enclosure on the wall or panel, and reinstall the a screws into the four corners of the front cover. 2:39
To learn more or order, please visit: dwyer-inst.com/Product/Pressure/DifferentialPressure/Gages/SeriesA-320
