Uploaded October 2025 | Updated September 2026, 16 minutes ago
Keeping your laser clean is the secret to maximum power, precision, and cut quality. In this video, I’ll show you exactly how to clean your mirrors and lens on the Hydra 13 laser (or any CO₂ laser) to keep it running at top performance.
You’ll see how I safely clean mirror #1, mirror #2, the laser head mirror, and the lens using 99% isopropyl alcohol and lint-free swabs — plus the simple routine I follow to avoid power loss, burn marks, and poor engraving results.
This step-by-step laser maintenance guide will help you:
✅ Clean your laser mirrors and lens safely
✅ Prevent smoke buildup and debris from reducing power
✅ Know which direction to clean (and why you should avoid circular motions)
✅ Reassemble your laser head correctly (flat side of the lens faces down!)
✅ Keep your laser cutting crisp and clean day after day
Whether you run a Hydra 13, OneLaser X-Series, or any other CO₂ gantry laser, this cleaning routine will extend the life of your optics and give you consistent results.
👉 Don’t forget to Like, Subscribe, and hit the bell for more laser maintenance tips, LightBurn tutorials, and project ideas!
Learn more about OneLaser:
1laser.com/laserguys
Discount code: LASERGUYS
Facebook communities:
General Laser help:
HTTPS://facebook.com/groups/thelaserguys
OneLaser Community:
Https://facebook.com/groups/onelaser
Keeping your laser clean is the secret to maximum power, precision, and cut quality. In this video, I’ll show you exactly how to clean your mirrors and lens on the Hydra 13 laser (or any CO₂ laser) to keep it running at top performance.
You’ll see how I safely clean mirror #1, mirror #2, the laser head mirror, and the lens using 99% isopropyl alcohol and lint-free swabs — plus the simple routine I follow to avoid power loss, burn marks, and poor engraving results.
This step-by-step laser maintenance guide will help you:
✅ Clean your laser mirrors and lens safely
✅ Prevent smoke buildup and debris from reducing power
✅ Know which direction to clean (and why you should avoid circular motions)
✅ Reassemble your laser head correctly (flat side of the lens faces down!)
✅ Keep your laser cutting crisp and clean day after day
Whether you run a Hydra 13, OneLaser X-Series, or any other CO₂ gantry laser, this cleaning routine will extend the life of your optics and give you consistent results.
👉 Don’t forget to Like, Subscribe, and hit the bell for more laser maintenance tips, LightBurn tutorials, and project ideas!
Learn more about OneLaser:
1laser.com/laserguys
Discount code: LASERGUYS
Facebook communities:
General Laser help:
HTTPS://facebook.com/groups/thelaserguys
OneLaser Community:
Https://facebook.com/groups/onelaser
