How to Build a Wardrobe Armoire Cabinet {Using 2x4s and Plywood!} @WoodshopDiaries

How to Build a Wardrobe Armoire Cabinet {Using 2x4s and Plywood!} @WoodshopDiaries

Uploaded May 2021 | Updated September 2026, 3 days ago

The first 1000 people to use this link will receive a free trial of Skillshare Premium Membership: https://skl.sh/sharawoodshopdiaries05211

Welcome back to the 5th and final build to go in my Dad's matching office furniture series!

This tall pantry cabinet/armoire/wardrobe cabinet build was made using standard 2x4 boards and some birch plywood. Even with lumber prices so high these days, this build still came out under $250 and I have plenty of leftover plywood to use for my next project :)

Grab the details on the build here:
woodshopdiaries.com/diy-wardrobe-armoire-cabinet-2x4s-and-plywood

And the printable plans here:
woodshop-diaries.myshopify.com/collections/printable-pdf-building-plans/products/armoire-wardrobe-cabinet-plan

If you've missed any of the previous pieces in the matching set, check them out here:
DIY Writing Desk: youtu.be/tatIcqcEGXk
DIY Display Shelf with Drawers: youtu.be/V_4yJbjSh6E
DIY Computer Desk: youtu.be/5sDnzE7lFm0
DIY File Cabinet: youtu.be/qqT-mcHixB4

Grab the 5 plan bundle pack printable building plans here:
woodshop-diaries.myshopify.com/collections/printable-pdf-building-plans/products/matching-office-furniture-plan-bundle

You may find these posts/videos helpful in the build process:
How to Make Your Own 2x2s: woodshopdiaries.com/woodworking-tips-square-edges-make-your-own-2x2s
How to Cut Down Plywood Sheets: woodshopdiaries.com/cut-down-plywood-sheets-with-circular-saw
How to Use a Pocket Hole Jig: woodshopdiaries.com/how-to-use-pocket-hole-jig
How to Apply Edge Banding to Plywood: woodshopdiaries.com/how-to-cover-plywood-edges
4 Ways to Plug a Pocket Hole: woodshopdiaries.com/4-ways-to-fill-a-pocket-hole
10 Must Have Tools for Cabinet Building: woodshopdiaries.com/must-have-tools-for-cabinet-furniture-making
How to Build and Install A Drawer: woodshopdiaries.com/theres-no-wrong-way-to-make-a-drawer

Affiliate links below...

Tools and Materials:

Tools:
Circular Saw: homedepot.sjv.io/AooaYx
Kreg Rip Cut: amzn.to/3hjgqTF
Kreg AccuCut: amzn.to/3vJtDJ2
Miter Saw: homedepot.sjv.io/yd96v
Table Saw
Drill/Driver: homedepot.sjv.io/2G6Za
Pocket Hole Jig: amzn.to/3tpzeTe & amzn.to/3b9Wlv7
Shelf Pin Jig: amzn.to/3tqm0Wm
Router & Rabbeting Bit: homedepot.sjv.io/vqZAA & homedepot.sjv.io/P0OkBM
Staple gun

Materials:
(1 + 1/2) Sheet 3/4" birch plywood: homedepot.sjv.io/9rR95
(1) sheet 1/4" plywood: homedepot.sjv.io/3vVYr
(8) 2x4x8 boards (use the off cuts to make your own 2x2s or purchase (2) 2x2x8 boards): homedepot.sjv.io/kr42M
(8) 8 ft sticks cove Molding: homedepot.sjv.io/e4vDdr
(1) 14" drawer slide: amzn.to/3vONXZw
(2) pair pivot hinges: amzn.to/3vONZR8
Edge Banding: amzn.to/2PUsBe5
2 1/2" pocket hole screws: amzn.to/3vNZDvY
1 1/4" pocket hole screws: amzn.to/3eZPQfq
2" wood screws
Wood Glue
Shelf pins: amzn.to/3esWTyh
Minwax Helmsman Clear Coat: amzn.to/3b6Jgmh

$How to Build a Wardrobe Armoire Cabinet {Using 2x4s and Plywood!} The first 1000 people to use this link will receive a free trial of Skillshare Premium Membership: https://skl.sh/sharawoodshopdiaries05211 Welcome back to the 5th and final build to go in my Dads matching office furniture series! This tall pantry cabinet/armoire/wardrobe cabinet build was made using standard 2x4 boards and some birch plywood. Even with lumber prices so high these days, this build still came out under $250 and I have plenty of leftover plywood to use for my next project :) Grab the details on the build here: https://www.woodshopdiaries.com/diy-wardrobe-armoire-cabinet-2x4s-and-plywood/ And the printable plans here: https://woodshop-diaries.myshopify.com/collections/printable-pdf-building-plans/products/armoire-wardrobe-cabinet-plan If youve missed any of the previous pieces in the matching set, check them out here: DIY Writing Desk: https://youtu.be/tatIcqcEGXk DIY Display Shelf with Drawers: https://youtu.be/V_4yJbjSh6E DIY Computer Desk: https://youtu.be/5sDnzE7lFm0 DIY File Cabinet: https://youtu.be/qqT-mcHixB4 Grab the 5 plan bundle pack printable building plans here: https://woodshop-diaries.myshopify.com/collections/printable-pdf-building-plans/products/matching-office-furniture-plan-bundle You may find these posts/videos helpful in the build process: How to Make Your Own 2x2s: https://www.woodshopdiaries.com/woodworking-tips-square-edges-make-your-own-2x2s/ How to Cut Down Plywood Sheets: https://www.woodshopdiaries.com/cut-down-plywood-sheets-with-circular-saw/ How to Use a Pocket Hole Jig: https://www.woodshopdiaries.com/how-to-use-pocket-hole-jig/ How to Apply Edge Banding to Plywood: https://www.woodshopdiaries.com/how-to-cover-plywood-edges/ 4 Ways to Plug a Pocket Hole: https://www.woodshopdiaries.com/4-ways-to-fill-a-pocket-hole/ 10 Must Have Tools for Cabinet Building: https://www.woodshopdiaries.com/must-have-tools-for-cabinet-furniture-making/ How to Build and Install A Drawer: https://www.woodshopdiaries.com/theres-no-wrong-way-to-make-a-drawer/ Affiliate links below... Tools and Materials: Tools: Circular Saw: https://homedepot.sjv.io/AooaYx Kreg Rip Cut: https://amzn.to/3hjgqTF Kreg AccuCut: https://amzn.to/3vJtDJ2 Miter Saw: https://homedepot.sjv.io/yd96v Table Saw Drill/Driver: https://homedepot.sjv.io/2G6Za Pocket Hole Jig: https://amzn.to/3tpzeTe & https://amzn.to/3b9Wlv7 Shelf Pin Jig: https://amzn.to/3tqm0Wm Router & Rabbeting Bit: https://homedepot.sjv.io/vqZAA & https://homedepot.sjv.io/P0OkBM Staple gun Materials: (1 + 1/2) Sheet 3/4 birch plywood: https://homedepot.sjv.io/9rR95 (1) sheet 1/4 plywood: https://homedepot.sjv.io/3vVYr (8) 2x4x8 boards (use the off cuts to make your own 2x2s or purchase (2) 2x2x8 boards): https://homedepot.sjv.io/kr42M (8) 8 ft sticks cove Molding: https://homedepot.sjv.io/e4vDdr (1) 14 drawer slide: https://amzn.to/3vONXZw (2) pair pivot hinges: https://amzn.to/3vONZR8 Edge Banding: https://amzn.to/2PUsBe5 2 1/2 pocket hole screws: https://amzn.to/3vNZDvY 1 1/4 pocket hole screws: https://amzn.to/3eZPQfq 2 wood screws Wood Glue Shelf pins: https://amzn.to/3esWTyh Minwax Helmsman Clear Coat: https://amzn.to/3b6Jgmh$

Building Custom DIY Built In Cabinets with Shelves and Storage Bench

How to Build a Simple Garden Arbor | Part 1 of Enclosed Garden Build

$How to Build a Closet System {Drawers, Cubbies, & Belt/Tie Rack!} In this video, I’ll show you how to build your own built in (or stand alone, if you prefer) DIY Closet System! For dimensions and details, check out the FREE building plans here: https://www.woodshopdiaries.com/built-in-diy-closet-system/ And find the printable plans with cut list and plywood cut diagram here: https://woodshop-diaries.myshopify.com/collections/armoires/products/basic-closet-system-build-plans Now, I know the video shows this DIY closet system standing on its own–and that’s definitely a possibility. This piece can stand alone in a room. But it was actually designed to fit into a nook in a friend’s house that just needed some extra storage space. The nook was 4 ft wide, 2 ft deep, and 8 ft tall. So I built this piece slightly smaller to give some wiggle room to avoid issues during installation. The overall size here is 47 wide, 20 deep, and 7 ft tall. Check out my other closet system video here: https://youtu.be/wyClGvb_Vxs Follow Woodshop Diaries: Website: https://www.woodshopdiaries.com/ Shop: https://woodshop-diaries.myshopify.com/ TikTok: https://www.tiktok.com/@woodshopdiaries? Facebook: https://www.facebook.com/woodshopdiaries Instagram: https://www.instagram.com/woodshopdiaries/ Additional Resources You May Find Helpful For This Build: How to Cut Down Plywood Sheets: https://www.woodshopdiaries.com/cut-down-plywood-sheets-with-circular-saw/ How to Use a Pocket Hole Jig: https://www.woodshopdiaries.com/how-to-use-pocket-hole-jig/ How to Apply Edge Banding: https://www.woodshopdiaries.com/how-to-cover-plywood-edges/ How to Build and Install Drawers: https://www.woodshopdiaries.com/theres-no-wrong-way-to-make-a-drawer/ How to Build Cabinets: https://www.woodshopdiaries.com/how-to-build-your-own-diy-kitchen-cabinets-2/ Tools and Materials Used in this Video: Affiliate links Tools: Circular saw: https://homedepot.sjv.io/AooaYx Kreg Rip Cut & AccuCut (optional cutting guides to use with circular saw): https://amzn.to/3hXCjGy Miter Saw (optional…you can use circular saw for everything if you want) Table saw (also optional) Drill/Driver: https://homedepot.sjv.io/2G6Za Kreg Pocket Hole Jig: https://amzn.to/3e3DiUK Dowel Jig: https://amzn.to/3wzzS2a Clamps Stapler (optional) Materials: (4) sheets ¾″ plywood: https://homedepot.sjv.io/9rR95 (2) sheets ¼″ plywood: https://homedepot.sjv.io/3vVYr (1) 1″ x 48″ wooden dowel: https://homedepot.sjv.io/BXxPmW (4) pair 16″ drawer slides (I buy the bulk pack because it’s cheaper): https://amzn.to/2VovmXr (1) pair 14″ drawer slides: https://amzn.to/3ARkRMq ⅜″ dowels: https://amzn.to/2TVwwtc 1 ¼″ pocket hole screws: https://amzn.to/3htT8K5 1 ¼″ screws Wood Glue: https://amzn.to/3xwrDW9 RapidFuse Glue: https://amzn.to/3hBmO8x Edge Banding: https://amzn.to/3k4Vscc (5) modern handles: https://amzn.to/3hx9ouc 3″ screws (for securing to wall when complete) Wood Putty: https://amzn.to/3wur1is Clear Coat Finish: https://amzn.to/36z86rX$

How to Build a Kids Floor Bed From Dowels and 2x4s!

How to Build a Glass Door Console Cabinet

This is NOT Your Average DIY Bookcase Build

DIY Bathroom Remodel Installing the Shower and Vanity

How to Build a Storage Cabinet for Entryway | Mudroom Redo Part 1

How to Build a DIY Ladder Shelf with Basic Tools and Materials

How to Build a Mid Century Modern Nightstand

How to Build a Range Hood Cover

Shara Woodshop Diaries |

How to Build a Wardrobe Armoire Cabinet--{Using 2x4s and Plywood!}