Shara Woodshop Diaries | How to Build a Kids Floor Bed--From Dowels and 2x4s! @WoodshopDiaries | Uploaded 3 years ago | Updated 2 hours ago
In this video, I'm sharing how to build this adorable DIY kids floor bed using basic 2x4s and some wood dowels!
I’ve got the building plans, dimensions and step by step details for a DIY floor bed here: woodshopdiaries.com/diy-toddler-floor-bed
See note at bottom *
This was a SUPER simple project and only required a few basic tools and materials and I'll show you how here :)
Follow Woodshop Diaries On:
Website: woodshopdiaries.com
TikTok: https://www.tiktok.com/@woodshopdiari...
Facebook: facebook.com/woodshopdiaries
Instagram:instagram.com/woodshopdiaries
Pinterest: pinterest.com/sharamccuiston
SHOP MERCH AND BUILDING PLANS HERE: woodshop-diaries.myshopify.com
Some helpful tips to use for this project:
How to use a pocket hole jig: woodshopdiaries.com/how-to-use-pocket-hole-jig
How to finish raw wood furniture: https://www.woodshopdiaries.com/how-t...
Tools and Materials Used In this Video:
*affiliate links below
Materials:
(4) 2x4x8 boards: homedepot.sjv.io/Eaz094
(3) 2x2x8 boards: homedepot.sjv.io/n1R4N7
(3) 2x3x8 boards: homedepot.sjv.io/6bPkAr
(14) 3/4" diameter x 48" long dowel rods: homedepot.sjv.io/NKQGQK
2 1/2" pocket hole screws: amzn.to/3rMY5Bl
2 1/2" wood screws
2 7/8" timber screws (optional): homedepot.sjv.io/QONYNA
Wood Glue
Sandpaper
Tools:
Miter Saw: homedepot.sjv.io/b3DkDx
Drill/Driver: homedepot.sjv.io/n1R4R7
Pocket Hole Jig: amzn.to/3j2OVNk
3/4" forstener bit: homedepot.sjv.io/BXz5zL
Kreg Multi-Mark (helpful, not required): amzn.to/3fb9A0g
Various clamps (helpful, not required)
Rubber Mallet (helpful, not required)
*A Note About Bed Rail Spacing:
There are "industry standards" for rail spacing for cribs. However, since this isn't a "crib" for a baby, but is a bed for an older child, I'm not sure if the standards apply in this case. So, please be aware, the standards are not followed in this plan.
The great thing about building it yourself is that you can customize it however you wish. And since this particular project was built for an older toddler, the spacing for the rails used here seemed adequate for his size.
However, if you prefer to stick to the standards, please take note to do your own research before building your own as these "industry standards" are always subject to change. I encourage you to do what you are comfortable doing.
In this video, I'm sharing how to build this adorable DIY kids floor bed using basic 2x4s and some wood dowels!
I’ve got the building plans, dimensions and step by step details for a DIY floor bed here: woodshopdiaries.com/diy-toddler-floor-bed
See note at bottom *
This was a SUPER simple project and only required a few basic tools and materials and I'll show you how here :)
Follow Woodshop Diaries On:
Website: woodshopdiaries.com
TikTok: https://www.tiktok.com/@woodshopdiari...
Facebook: facebook.com/woodshopdiaries
Instagram:instagram.com/woodshopdiaries
Pinterest: pinterest.com/sharamccuiston
SHOP MERCH AND BUILDING PLANS HERE: woodshop-diaries.myshopify.com
Some helpful tips to use for this project:
How to use a pocket hole jig: woodshopdiaries.com/how-to-use-pocket-hole-jig
How to finish raw wood furniture: https://www.woodshopdiaries.com/how-t...
Tools and Materials Used In this Video:
*affiliate links below
Materials:
(4) 2x4x8 boards: homedepot.sjv.io/Eaz094
(3) 2x2x8 boards: homedepot.sjv.io/n1R4N7
(3) 2x3x8 boards: homedepot.sjv.io/6bPkAr
(14) 3/4" diameter x 48" long dowel rods: homedepot.sjv.io/NKQGQK
2 1/2" pocket hole screws: amzn.to/3rMY5Bl
2 1/2" wood screws
2 7/8" timber screws (optional): homedepot.sjv.io/QONYNA
Wood Glue
Sandpaper
Tools:
Miter Saw: homedepot.sjv.io/b3DkDx
Drill/Driver: homedepot.sjv.io/n1R4R7
Pocket Hole Jig: amzn.to/3j2OVNk
3/4" forstener bit: homedepot.sjv.io/BXz5zL
Kreg Multi-Mark (helpful, not required): amzn.to/3fb9A0g
Various clamps (helpful, not required)
Rubber Mallet (helpful, not required)
*A Note About Bed Rail Spacing:
There are "industry standards" for rail spacing for cribs. However, since this isn't a "crib" for a baby, but is a bed for an older child, I'm not sure if the standards apply in this case. So, please be aware, the standards are not followed in this plan.
The great thing about building it yourself is that you can customize it however you wish. And since this particular project was built for an older toddler, the spacing for the rails used here seemed adequate for his size.
However, if you prefer to stick to the standards, please take note to do your own research before building your own as these "industry standards" are always subject to change. I encourage you to do what you are comfortable doing.
