Uploaded February 2022 | Updated September 2026, 6 days ago
I tackled one of my biggest pet peeves in our new home in this video--the laundry room door.
Our existing pivot door opened in both directions, but neither one of them were convenient. And while it wasn't THAT big of a deal, it was a source of daily irritation, so I finally had enough and decided to replace this poorly designed laundry room entrance with a more practical (and pretty) solution--a MODERN DIY SLIDING DOOR!
Join me as I build and install this modern sliding door with frosted glass panels in this video and head over to grab the plans and more details on the project here:
woodshopdiaries.com/modern-diy-sliding-door-with-frosted-glass-panels
Check out the similar style sliding door I built like this using real glass and a router:
woodshopdiaries.com/diy-modern-sliding-door
Affiliate links below
Sliding door kit available here in multiple sizes: amzn.to/3uJGBta
Follow Woodshop Diaries On:
Website: woodshopdiaries.com
TikTok: tiktok.com/@woodshopdiaries?
Facebook: facebook.com/woodshopdiaries
Instagram:instagram.com/woodshopdiaries
Pinterest: pinterest.com/sharamccuiston
SHOP NEW WOODWORKING TEES AND BUILDING PLANS HERE:
woodshop-diaries.myshopify.com
Tools & Materials:
Tools:
Miter saw: homedepot.sjv.io/yd96v
Table saw (completely optional–not necessary)
Circular saw (used to cut plexiglass–could also use utility knife, jig saw, etc): homedepot.sjv.io/P0YPKM
Circular saw fine finish blade: homedepot.sjv.io/rne7Gd
Clamps
Drill/Driver: homedepot.sjv.io/Aoo6Ya
⅜″ forstener bit: amzn.to/3kvZjPC
Wrench, pliers, or sockets to install sliding door hardware
Stud Finder: homedepot.sjv.io/N36jO
Nail Gun (to replace existing door trim if necessary): homedepot.sjv.io/c/1404662/1169744/8154
Kreg MultiMark and/or speed square: amzn.to/3oK5OQu
Materials:
(5) 2x6x8 boards
(1) 36×48 sheet (about ⅛″) plexiglass: homedepot.sjv.io/mgr7zy
Pack of 25 ½″ x 48″ square dowels: amzn.to/3HOkchZ
⅜″ dowels (Or can use pocket holes and screws instead): amzn.to/3LrkBct
1x4x8 (to replace existing door trim if necessary)
Wood Glue
Quick dry wood glue: amzn.to/3oJt15h
Sliding door kit (size needed may vary depending on your door size): amzn.to/3uJGBta
Frosted glass spray paint: amzn.to/3gEUdNZ
Ebony stain: homedepot.sjv.io/e4J6q6
Minwax Poly Clear Coat: amzn.to/3JoFaVe
I tackled one of my biggest pet peeves in our new home in this video--the laundry room door.
Our existing pivot door opened in both directions, but neither one of them were convenient. And while it wasn't THAT big of a deal, it was a source of daily irritation, so I finally had enough and decided to replace this poorly designed laundry room entrance with a more practical (and pretty) solution--a MODERN DIY SLIDING DOOR!
Join me as I build and install this modern sliding door with frosted glass panels in this video and head over to grab the plans and more details on the project here:
woodshopdiaries.com/modern-diy-sliding-door-with-frosted-glass-panels
Check out the similar style sliding door I built like this using real glass and a router:
woodshopdiaries.com/diy-modern-sliding-door
Affiliate links below
Sliding door kit available here in multiple sizes: amzn.to/3uJGBta
Follow Woodshop Diaries On:
Website: woodshopdiaries.com
TikTok: tiktok.com/@woodshopdiaries?
Facebook: facebook.com/woodshopdiaries
Instagram:instagram.com/woodshopdiaries
Pinterest: pinterest.com/sharamccuiston
SHOP NEW WOODWORKING TEES AND BUILDING PLANS HERE:
woodshop-diaries.myshopify.com
Tools & Materials:
Tools:
Miter saw: homedepot.sjv.io/yd96v
Table saw (completely optional–not necessary)
Circular saw (used to cut plexiglass–could also use utility knife, jig saw, etc): homedepot.sjv.io/P0YPKM
Circular saw fine finish blade: homedepot.sjv.io/rne7Gd
Clamps
Drill/Driver: homedepot.sjv.io/Aoo6Ya
⅜″ forstener bit: amzn.to/3kvZjPC
Wrench, pliers, or sockets to install sliding door hardware
Stud Finder: homedepot.sjv.io/N36jO
Nail Gun (to replace existing door trim if necessary): homedepot.sjv.io/c/1404662/1169744/8154
Kreg MultiMark and/or speed square: amzn.to/3oK5OQu
Materials:
(5) 2x6x8 boards
(1) 36×48 sheet (about ⅛″) plexiglass: homedepot.sjv.io/mgr7zy
Pack of 25 ½″ x 48″ square dowels: amzn.to/3HOkchZ
⅜″ dowels (Or can use pocket holes and screws instead): amzn.to/3LrkBct
1x4x8 (to replace existing door trim if necessary)
Wood Glue
Quick dry wood glue: amzn.to/3oJt15h
Sliding door kit (size needed may vary depending on your door size): amzn.to/3uJGBta
Frosted glass spray paint: amzn.to/3gEUdNZ
Ebony stain: homedepot.sjv.io/e4J6q6
Minwax Poly Clear Coat: amzn.to/3JoFaVe
![How to Build a Nightstand Table w/ Drawer [Matching Furniture Series]](https://i.ytimg.com/vi/EQkFBArVsUQ/mqdefault.jpg "How to Build a Nightstand Table w/ Drawer [Matching Furniture Series]
Hey friends! Im back with PART 2 of the matching guest bedroom furniture series today this time, sharing how to build the matching nightstand!
If you caught it a few videos ago, Im furnishing our (what used to be) empty guest bedroom in our new home with a matching set of bedroom furniture.
I already shared how I built a bed frame with arched headboard here:
https://www.woodshopdiaries.com/how-to-build-a-bed-curved-head-board/
So it makes sense to tackle these bedside tables next. But, be sure to subscribe and stay tuned because Ill be sharing AT LEAST one more piece in this matching set soon!
I hope you enjoy watching this piece come together...and seeing some bloopers and mistakes along the way.
Grab the project details and check out the blog here:
https://www.woodshopdiaries.com/diy-one-drawer-nightstand/
Grab the printable building plans here:
https://woodshop-diaries.myshopify.com/collections/tables/products/simple-one-drawer-nightstand-plans
Follow Woodshop Diaries On:
Website: https://www.woodshopdiaries.com/
TikTok: https://www.tiktok.com/@woodshopdiaries?
Facebook: https://facebook.com/woodshopdiaries
Instagram: https://instagram.com/woodshopdiaries
Pinterest: https://pinterest.com/sharamccuiston
SHOP NEW WOODWORKING TEES AND BUILDING PLANS HERE:
https://woodshop-diaries.myshopify.com/
Posts you may find helpful in the build:
How to cut plywood sheets: https://www.woodshopdiaries.com/cut-down-plywood-sheets-with-circular-saw/
How to use a pocket hole jig: https://www.woodshopdiaries.com/how-to-use-pocket-hole-jig/
How to apply iron on edge banding: https://www.woodshopdiaries.com/how-to-cover-plywood-edges/
How to build and install drawer boxes: https://www.woodshopdiaries.com/theres-no-wrong-way-to-make-a-drawer/
How to finish raw wood furniture: https://www.woodshopdiaries.com/how-to-finish-raw-wood-furniture-without-a-sprayer/
5 tips to professional looking DIY furniture: https://www.woodshopdiaries.com/5-diy-furniture-tips-to-look-professional/
Tools & Materials:
*Affiliate links below
Tools:
Circular Saw and straight edge (or cutting guides): https://homedepot.sjv.io/AooaYx & https://amzn.to/325pRR6
Miter Saw: https://homedepot.sjv.io/b3DkDx
Table Saw (optional)
Drill/ Driver: https://homedepot.sjv.io/Aoo6Ya
Brad Nailer (optional): https://homedepot.sjv.io/c/1404662/1354698/8154
Pocket Hole Jig: https://amzn.to/32eoPBY
Materials:
(1) 2x2x8 board
(1) 1x3x8 board
(1) 1x2x8 board OR 1/4 x 1 1/2 x 8 lattice trim (to trim sides)
(1) 4x4 sheet 3/4 plywood (note this is half of a full sheet): https://homedepot.sjv.io/9rR95
(1 2x4 sheet 1/4 plywood (note this is a quarter sheet): https://homedepot.sjv.io/RyZY4R
(1) 8 stick half round or other molding to add to drawer front (optional): https://homedepot.sjv.io/5bYXAD
(4) 4 3/4 tall furniture feet: https://homedepot.sjv.io/6b9g9q
(4) threaded inserts for furniture feet: https://amzn.to/3PLlnTs
(1) pair 16 drawer slides: https://amzn.to/3cNp8ZY
3/4 & 1 1/2 Edge Banding (optional): https://amzn.to/3nx64RT & https://amzn.to/3FNI4Az
Wood Glue: https://amzn.to/34NCtuv
1 ¼″ pocket hole screws: https://amzn.to/3FKfikk
1 1/4 wood screws
Wood finish (as desired)...stain: https://amzn.to/3SglrfM & poly: https://amzn.to/3JgesPz
Handles: https://amzn.to/3zmzCHv
Chapters:
00:00 Introduction
00:43 Cut Down Material
01:14 Assemble Side Panels
02:19 Prepare Bottom Panel
03:33 Assemble Nightstand Body
04:42 Add Drawer Slides
05:08 Add Feet
07:11 Build and Install Drawer Box
08:38 Install Drawer Front
09:18 Attach Top Panel
09:47 Trim Sides
10:17 Add Back and Finish")
