Uploaded June 2023 | Updated September 2026, 6 days ago
Hey friends, let's build an outdoor sofa! To be honest, this was a much easier build than I expected it to be and it turned out even better than I expected, too!
I built it in just one day (filming it at that...which makes everything take way longer). But, full disclosure, I did come back the next day and disassemble it to change one thing about the design. If I hadn't been filming it to show you guys, I wouldn't have had to disassemble and reassemble for the camera haha. I could have just swapped a couple pieces.
So TECHNICALLY it took me two days. But it should only take you one :)
Lucky for you, you don't have to deal with design changes because I've provided the step by step build plans so all you have to do is grab your materials and get started. You'll be lounging on your new outdoor couch by the end of the weekend.
Grab the printable building plans here: woodshop-diaries.myshopify.com/collections/outdoor/products/outdoor-sofa-plans
Check out the project details here: woodshopdiaries.com/how-to-build-an-outdoor-couch
Follow Woodshop Diaries On:
Website: woodshopdiaries.com
TikTok: tiktok.com/@woodshopdiaries?
Facebook: facebook.com/woodshopdiaries
Instagram: instagram.com/woodshopdiaries
Pinterest: pinterest.com/sharamccuiston
SHOP NEW WOODWORKING TEES AND BUILDING PLANS HERE:
woodshop-diaries.myshopify.com
Helpful resources for this project:
How to use a pocket hole jig: woodshopdiaries.com/how-to-use-pocket-hole-jig
How to shop for and buy lumber: woodshopdiaries.com/how-to-buy-lumber
Tools & Materials:
*Affiliate links below
Tools:
Miter Saw: homedepot.sjv.io/b3DkDx
Drill/Driver: homedepot.sjv.io/Aoo6Ya
Standard Pocket Hole Jig: amzn.to/32eoPBY
Kreg XL Pocket Hole Jig: amzn.to/3MR78fq
Sander
Materials:
(2) 4x4x8 posts
(1) 2x2x8 board
(8) 2x4x8 boards
4″ XL exterior pocket hole screws: amzn.to/43PH9vR
2 ½” exterior wood screws
2 ½” exterior pocket hole screws: amzn.to/3N2hsSd
4 ½” long timber screws or lag screws: amzn.to/3WY63qR
Wood Glue (exterior rated)
(3) 24″ x 24″ seat & back cushion sets (optional): amzn.to/3MWRoI8
Exterior Wood Finish: amzn.to/3CkvGbX
Chapters
00:00 Introduction
00:19 Figuring Sizing Based on Cushions
01:21 Building Outdoor Sofa Side Frames
04:46 Adding Back Framing
05:36 Installing Front Supports
06:16 Adding Back Slat Supports
07:11 Adding Back Corner Slats
07:47 Cutting and Assembling Middle Support
10:05 Attaching Remaining Slats
11:03 Apply Sealer
11:33 FINAL REVEAL!
Hey friends, let's build an outdoor sofa! To be honest, this was a much easier build than I expected it to be and it turned out even better than I expected, too!
I built it in just one day (filming it at that...which makes everything take way longer). But, full disclosure, I did come back the next day and disassemble it to change one thing about the design. If I hadn't been filming it to show you guys, I wouldn't have had to disassemble and reassemble for the camera haha. I could have just swapped a couple pieces.
So TECHNICALLY it took me two days. But it should only take you one :)
Lucky for you, you don't have to deal with design changes because I've provided the step by step build plans so all you have to do is grab your materials and get started. You'll be lounging on your new outdoor couch by the end of the weekend.
Grab the printable building plans here: woodshop-diaries.myshopify.com/collections/outdoor/products/outdoor-sofa-plans
Check out the project details here: woodshopdiaries.com/how-to-build-an-outdoor-couch
Follow Woodshop Diaries On:
Website: woodshopdiaries.com
TikTok: tiktok.com/@woodshopdiaries?
Facebook: facebook.com/woodshopdiaries
Instagram: instagram.com/woodshopdiaries
Pinterest: pinterest.com/sharamccuiston
SHOP NEW WOODWORKING TEES AND BUILDING PLANS HERE:
woodshop-diaries.myshopify.com
Helpful resources for this project:
How to use a pocket hole jig: woodshopdiaries.com/how-to-use-pocket-hole-jig
How to shop for and buy lumber: woodshopdiaries.com/how-to-buy-lumber
Tools & Materials:
*Affiliate links below
Tools:
Miter Saw: homedepot.sjv.io/b3DkDx
Drill/Driver: homedepot.sjv.io/Aoo6Ya
Standard Pocket Hole Jig: amzn.to/32eoPBY
Kreg XL Pocket Hole Jig: amzn.to/3MR78fq
Sander
Materials:
(2) 4x4x8 posts
(1) 2x2x8 board
(8) 2x4x8 boards
4″ XL exterior pocket hole screws: amzn.to/43PH9vR
2 ½” exterior wood screws
2 ½” exterior pocket hole screws: amzn.to/3N2hsSd
4 ½” long timber screws or lag screws: amzn.to/3WY63qR
Wood Glue (exterior rated)
(3) 24″ x 24″ seat & back cushion sets (optional): amzn.to/3MWRoI8
Exterior Wood Finish: amzn.to/3CkvGbX
Chapters
00:00 Introduction
00:19 Figuring Sizing Based on Cushions
01:21 Building Outdoor Sofa Side Frames
04:46 Adding Back Framing
05:36 Installing Front Supports
06:16 Adding Back Slat Supports
07:11 Adding Back Corner Slats
07:47 Cutting and Assembling Middle Support
10:05 Attaching Remaining Slats
11:03 Apply Sealer
11:33 FINAL REVEAL!
![How to Build a Nightstand Table w/ Drawer [Matching Furniture Series]](https://i.ytimg.com/vi/EQkFBArVsUQ/mqdefault.jpg "How to Build a Nightstand Table w/ Drawer [Matching Furniture Series]
Hey friends! Im back with PART 2 of the matching guest bedroom furniture series today this time, sharing how to build the matching nightstand!
If you caught it a few videos ago, Im furnishing our (what used to be) empty guest bedroom in our new home with a matching set of bedroom furniture.
I already shared how I built a bed frame with arched headboard here:
https://www.woodshopdiaries.com/how-to-build-a-bed-curved-head-board/
So it makes sense to tackle these bedside tables next. But, be sure to subscribe and stay tuned because Ill be sharing AT LEAST one more piece in this matching set soon!
I hope you enjoy watching this piece come together...and seeing some bloopers and mistakes along the way.
Grab the project details and check out the blog here:
https://www.woodshopdiaries.com/diy-one-drawer-nightstand/
Grab the printable building plans here:
https://woodshop-diaries.myshopify.com/collections/tables/products/simple-one-drawer-nightstand-plans
Follow Woodshop Diaries On:
Website: https://www.woodshopdiaries.com/
TikTok: https://www.tiktok.com/@woodshopdiaries?
Facebook: https://facebook.com/woodshopdiaries
Instagram: https://instagram.com/woodshopdiaries
Pinterest: https://pinterest.com/sharamccuiston
SHOP NEW WOODWORKING TEES AND BUILDING PLANS HERE:
https://woodshop-diaries.myshopify.com/
Posts you may find helpful in the build:
How to cut plywood sheets: https://www.woodshopdiaries.com/cut-down-plywood-sheets-with-circular-saw/
How to use a pocket hole jig: https://www.woodshopdiaries.com/how-to-use-pocket-hole-jig/
How to apply iron on edge banding: https://www.woodshopdiaries.com/how-to-cover-plywood-edges/
How to build and install drawer boxes: https://www.woodshopdiaries.com/theres-no-wrong-way-to-make-a-drawer/
How to finish raw wood furniture: https://www.woodshopdiaries.com/how-to-finish-raw-wood-furniture-without-a-sprayer/
5 tips to professional looking DIY furniture: https://www.woodshopdiaries.com/5-diy-furniture-tips-to-look-professional/
Tools & Materials:
*Affiliate links below
Tools:
Circular Saw and straight edge (or cutting guides): https://homedepot.sjv.io/AooaYx & https://amzn.to/325pRR6
Miter Saw: https://homedepot.sjv.io/b3DkDx
Table Saw (optional)
Drill/ Driver: https://homedepot.sjv.io/Aoo6Ya
Brad Nailer (optional): https://homedepot.sjv.io/c/1404662/1354698/8154
Pocket Hole Jig: https://amzn.to/32eoPBY
Materials:
(1) 2x2x8 board
(1) 1x3x8 board
(1) 1x2x8 board OR 1/4 x 1 1/2 x 8 lattice trim (to trim sides)
(1) 4x4 sheet 3/4 plywood (note this is half of a full sheet): https://homedepot.sjv.io/9rR95
(1 2x4 sheet 1/4 plywood (note this is a quarter sheet): https://homedepot.sjv.io/RyZY4R
(1) 8 stick half round or other molding to add to drawer front (optional): https://homedepot.sjv.io/5bYXAD
(4) 4 3/4 tall furniture feet: https://homedepot.sjv.io/6b9g9q
(4) threaded inserts for furniture feet: https://amzn.to/3PLlnTs
(1) pair 16 drawer slides: https://amzn.to/3cNp8ZY
3/4 & 1 1/2 Edge Banding (optional): https://amzn.to/3nx64RT & https://amzn.to/3FNI4Az
Wood Glue: https://amzn.to/34NCtuv
1 ¼″ pocket hole screws: https://amzn.to/3FKfikk
1 1/4 wood screws
Wood finish (as desired)...stain: https://amzn.to/3SglrfM & poly: https://amzn.to/3JgesPz
Handles: https://amzn.to/3zmzCHv
Chapters:
00:00 Introduction
00:43 Cut Down Material
01:14 Assemble Side Panels
02:19 Prepare Bottom Panel
03:33 Assemble Nightstand Body
04:42 Add Drawer Slides
05:08 Add Feet
07:11 Build and Install Drawer Box
08:38 Install Drawer Front
09:18 Attach Top Panel
09:47 Trim Sides
10:17 Add Back and Finish")
