Uploaded January 2021 | Updated November 2026, 2 hours ago
An assembly and setup guide for the latest revision of the Lakhovsky multiwave oscillator, presented by Aaron Murakami. He goes through the pulse modulator, which contains a resonant Tesla style tank circuit with four spark gaps in series and an adjustable gap dial, and the three controls people use: a timer most set between 15 and 30 minutes, an intensity dial, and the spark gap adjustment, with about 50 percent recommended on both. He explains that for 220 volt 50 cycle countries the same unit ships with an inverter, which he says gives identical results to a North American supply and avoids the power factor problems of a universal transformer. The connections are color coded, three red and one black, with the green chassis ground left alone for standard operation. On the earth rod he is explicit: contact the power company first so underground electrical and gas lines can be marked before anything is driven into the ground.
Chapters
0:00 What is in the system
1:49 The pulse modulator and its controls
3:30 Running it overseas on an inverter
5:10 Timer, intensity and spark gap settings
6:52 The stands, and going to a fixed height
8:26 Transmitter and receiver coils
10:10 Color coded connections
11:51 The ground rod, and calling first
emediapress.com/mwo
emediapress.com
emediapress.com/energytimes
Recorded 2021-01-14. Posted 2021-01-19.
An assembly and setup guide for the latest revision of the Lakhovsky multiwave oscillator, presented by Aaron Murakami. He goes through the pulse modulator, which contains a resonant Tesla style tank circuit with four spark gaps in series and an adjustable gap dial, and the three controls people use: a timer most set between 15 and 30 minutes, an intensity dial, and the spark gap adjustment, with about 50 percent recommended on both. He explains that for 220 volt 50 cycle countries the same unit ships with an inverter, which he says gives identical results to a North American supply and avoids the power factor problems of a universal transformer. The connections are color coded, three red and one black, with the green chassis ground left alone for standard operation. On the earth rod he is explicit: contact the power company first so underground electrical and gas lines can be marked before anything is driven into the ground.
Chapters
0:00 What is in the system
1:49 The pulse modulator and its controls
3:30 Running it overseas on an inverter
5:10 Timer, intensity and spark gap settings
6:52 The stands, and going to a fixed height
8:26 Transmitter and receiver coils
10:10 Color coded connections
11:51 The ground rod, and calling first
emediapress.com/mwo
emediapress.com
emediapress.com/energytimes
Recorded 2021-01-14. Posted 2021-01-19.










