Uploaded September 2020 | Updated November 2026, 2 hours ago
The second part of Dr James DeMeo's orgone energy presentation at the 2020 conference, introduced by Aaron Murakami. He shows how accumulator panels are layered, galvanised sheet on the inside, steel wool or sheep's wool between, shellacked masonite on the outside, and stresses that they do not need to be pretty to work. The systematic experiment put an electroscope inside a 20-ply accumulator with the door open and then in a cardboard box of the same interior shape a metre away, run in pairs over two days of low humidity in September 2010. The average discharge time inside was 596.9 seconds against 122.6 in the control, a five-fold difference, with a statistical probability of six in a thousand by chance. He then introduces the gravitor apparatus on its pivots and brushes and the battery-fed flyback and multiplier supply that takes it to roughly 90 to 100 thousand volts DC.
Chapters
0:00 Introduction by Aaron Murakami
2:36 Building the accumulator walls
4:04 Electroscope versus a cardboard box
6:06 The gravitor apparatus
7:14 A 100,000 volt DC supply
emediapress.com/product-category/energy-science-technology-conference/2020
emediapress.com/conference
emediapress.com
emediapress.com/energytimes
2020 Energy Science & Technology Conference. Posted 2020-09-15.
The second part of Dr James DeMeo's orgone energy presentation at the 2020 conference, introduced by Aaron Murakami. He shows how accumulator panels are layered, galvanised sheet on the inside, steel wool or sheep's wool between, shellacked masonite on the outside, and stresses that they do not need to be pretty to work. The systematic experiment put an electroscope inside a 20-ply accumulator with the door open and then in a cardboard box of the same interior shape a metre away, run in pairs over two days of low humidity in September 2010. The average discharge time inside was 596.9 seconds against 122.6 in the control, a five-fold difference, with a statistical probability of six in a thousand by chance. He then introduces the gravitor apparatus on its pivots and brushes and the battery-fed flyback and multiplier supply that takes it to roughly 90 to 100 thousand volts DC.
Chapters
0:00 Introduction by Aaron Murakami
2:36 Building the accumulator walls
4:04 Electroscope versus a cardboard box
6:06 The gravitor apparatus
7:14 A 100,000 volt DC supply
emediapress.com/product-category/energy-science-technology-conference/2020
emediapress.com/conference
emediapress.com
emediapress.com/energytimes
2020 Energy Science & Technology Conference. Posted 2020-09-15.










