vaultfox | How to 3D Print Helmets in ONE PIECE with CURA Block Supports // Beginner Friendly Tutorial @vaultfox | Uploaded June 2021 | Updated October 2024, 1 hour ago.
Bo Katan Helmet File: rstyle.me/+tKg5XD3LD3uDa4JX1RiuuQ
Full set of Bo Armor: rstyle.me/+cpJ-txL_1FowWy79igMrMg

use code VAULTFOX5OFF for 5% off your order of Zyltech filament!
Zyltech Filament (I use 1.75mm PLA): https://www.zyltech.com?aff=81

Lots of you left comments on my last video saying there was an even easier way to remove redundant supports on helmets and you've made my life so much easier, so I wanted to return the favor with a tutorial!

I'd recommend this method for beginners especially because it doesn't really require you to know where supports need to be placed, we'll just be removing the ones we DON'T want in this tutorial.

Get Ultimaker CURA: ultimaker.com/software/ultimaker-cura
Bo-Katan Files: patreon.com/mysterymakers

0:00 - Intro + Thanks
2:05 - With Auto Generated Supports
5:11 - How to Block Out Auto Generated Supports
7:42 - Power Failure + Print Recovery
8:52 - Completed Helmet

-----

My Most Commonly Used 3D Printing Supplies (amazon links are affiliate links)
Creality CR-10s Printer: amzn.to/2T86i5M

Foam Brushes: amzn.to/37J5M2R
Silicone Cups: amzn.to/2NxFCsU
UV Curing Lights: amzn.to/37FC7HR
Nitrile Gloves: amzn.to/3asn5qq
Super Glue + Accelerant: amzn.to/2J9mrDD
Metal Picks: amzn.to/38sIUUC
Plastic Clippers: amzn.to/33f536l
Filler Primer: amzn.to/2FsDNJa
Bondo: amzn.to/32lAKvL
Sanding Sponges: amzn.to/3rd9kTb
Mouse Sander: amzn.to/3nIRPry
Sander Pads: amzn.to/34xfMKJ
Wood Burning Tool: amzn.to/37EkXKZ
Respirator: amzn.to/32gSU1F
Respirator Refills: amzn.to/3bgpzaG
Safety Goggles: amzn.to/3bIoU1L
Nitrile Gloves: amzn.to/3hjLaQB
Varying grits of sandpaper: amzn.to/3imMfbG