Uploaded February 2023 | Updated November 2026, 13 minutes ago
Have you ever designed text into your 3D printed part only to find less than desirable results after it’s finished printing? Maybe you’ve never added text but want to on your next print? Ross has you covered.
In this video, Ross goes step by step in Fusion 360 to give you his design intent, best practices, and tips for getting the best quality text on your 3D printed part.
Please let us know in the comments if there’s something you’d like us to cover or a challenge that you’re working through!
VIDEO CHAPTERS
0:00 - Introduction
0:52 - Orientation & Placement
3:27 - Thickness & Size
4:40 - Fonts
5:24 - Debased vs. Embossed
7:14 - Recap
Want to learn more about 3D Printing? Check out the Markforged learning library for more tips and tricks: bit.ly/3y04flG
Have you ever designed text into your 3D printed part only to find less than desirable results after it’s finished printing? Maybe you’ve never added text but want to on your next print? Ross has you covered.
In this video, Ross goes step by step in Fusion 360 to give you his design intent, best practices, and tips for getting the best quality text on your 3D printed part.
Please let us know in the comments if there’s something you’d like us to cover or a challenge that you’re working through!
VIDEO CHAPTERS
0:00 - Introduction
0:52 - Orientation & Placement
3:27 - Thickness & Size
4:40 - Fonts
5:24 - Debased vs. Embossed
7:14 - Recap
Want to learn more about 3D Printing? Check out the Markforged learning library for more tips and tricks: bit.ly/3y04flG




![3D Printing Car Parts for General Motors with Azoth 3D | Markforged in the Field
Azoth 3D is a trusted, Michigan-based manufacturer known for producing small, complex metal parts. And they use additive technology like Markforged binder jetting to get the job done.
The team at Azoth used their binder jetting expertise to deliver for General Motors, one of the many customers they serve across the automotive, defense, and medical industries. They designed and produced a 3D printed medallion that sits on top of the manual shifter knob in their Cadillac Blackwing vehicles.
It’s the first 3D printed production component in a Cadillac.
“A lot of manufacturers in the additive industry, and additive equipment in its own right just hasn’t been able to do [that]. But Azoth, working with the Markforged team, has passed this milestone,” says General Manager, Cody Cochran.
By utilizing the Markforged Binder Jetting solution, Azoth 3D has been able to pass a full PPAP (Production Part Approval Process) on more than 40 parts, including safety critical components.
Want to learn more about Markforged binder jetting solutions? www.bit.ly/azoth-binder-jetting 3D Printing Car Parts for General Motors with Azoth 3D | Markforged in the Field](https://i.ytimg.com/vi/jNhLeqXvPKw/mqdefault.jpg)





