Uploaded March 2024 | Updated November 2026, 5 hours ago
FluidX3D on #GitHub: github.com/ProjectPhysX/FluidX3D
How realistic can a #CFD simulation be? Here is a 1 billion cell #FluidX3D simulation of an impacting raindrop, fully raytraced in 8K. FluidX3D contains state-of-the-art volume-of-fluid and surface tension models for highly accurate free surface simulations. Combined with my own #OpenCL graphics engine, results are raytraced on-the-fly at image resolution as large as remaining #GPU VRAM can hold.
The simulation here (17355 time steps at 1060x1060x900 resolution) took only 1 hour, but 8K raytracing (4x 1200 frames) almost 5 hours. 8K means every frame is 33 MegaPixels. For every pixel, up to 10 rays are computed for 2 consecutive reflections/refractions. The entire simulation domain gets refracted through every droplet. The png images alone fill 48GB. Working with such large image/video resolution gets quite difficult, as no free video editing software supports it besides ffmpeg.
This was computed on a single #AMDInstinct MI210 64GB #HPC GPU, which has neither dedicated #raytracing hardware nor any sort of #rendering hardware. FluidX3D can still render/raytrace using OpenCL.
Setup and parameters for reproducibility: github.com/ProjectPhysX/FluidX3D/blob/master/src/setup.cpp#L1088
For validation and numerical details, see my dissertation: doi.org/10.15495/EPub_UBT_00006977
Timestamps:
0:00 view 1
0:20 view 2
0:40 view 3
1:00 view 4
1:20 view 1 zommed in
1:40 view 2 zommed in
2:00 view 3 zommed in
2:20 view 4 zommed in
FluidX3D on #GitHub: github.com/ProjectPhysX/FluidX3D
How realistic can a #CFD simulation be? Here is a 1 billion cell #FluidX3D simulation of an impacting raindrop, fully raytraced in 8K. FluidX3D contains state-of-the-art volume-of-fluid and surface tension models for highly accurate free surface simulations. Combined with my own #OpenCL graphics engine, results are raytraced on-the-fly at image resolution as large as remaining #GPU VRAM can hold.
The simulation here (17355 time steps at 1060x1060x900 resolution) took only 1 hour, but 8K raytracing (4x 1200 frames) almost 5 hours. 8K means every frame is 33 MegaPixels. For every pixel, up to 10 rays are computed for 2 consecutive reflections/refractions. The entire simulation domain gets refracted through every droplet. The png images alone fill 48GB. Working with such large image/video resolution gets quite difficult, as no free video editing software supports it besides ffmpeg.
This was computed on a single #AMDInstinct MI210 64GB #HPC GPU, which has neither dedicated #raytracing hardware nor any sort of #rendering hardware. FluidX3D can still render/raytrace using OpenCL.
Setup and parameters for reproducibility: github.com/ProjectPhysX/FluidX3D/blob/master/src/setup.cpp#L1088
For validation and numerical details, see my dissertation: doi.org/10.15495/EPub_UBT_00006977
Timestamps:
0:00 view 1
0:20 view 2
0:40 view 3
1:00 view 4
1:20 view 1 zommed in
1:40 view 2 zommed in
2:00 view 3 zommed in
2:20 view 4 zommed in
![PhysX3D [GRAVITY SIMULATION] Stereoscopic 3D Graphics Preview
Ich habe in meine hocheffiziente Java-Grafikausgabe stereoskopisches 3D Rendering integriert. Jeder Frame wird dabei aus zwei leicht unterschiedlichen Kameraperspektiven berechnet, was in Sachen Framerate etwa doppelt so lange dauert, wie das Rendern eines normalen 2D -Frames. Beide Bilder werden nebeneinander auf dem Display ausgegeben. Der Effekt ist wirklich atemberaubend, gerade eben bei so dreidimensionalen Dingen, wie den Umlaufbahnen von Planeten, Monden und Asteroiden. Und weil ich alles selbst programmiert habe, kann ich einstellen, wie weit die Kameras auseinander sind, also wie stark der 3D-Effekt ist, und wie weit die beiden Frames von einander verschoben sind, d.h. wie weit das Bild aus der Displayebene herauskommt oder wie tief es im Display erscheint.
Mehr Informationen auf: http://www.projectphysx.de
Song: Disfigure - Blank [NCS Release] PhysX3D [GRAVITY SIMULATION] Stereoscopic 3D Graphics Preview](https://i.ytimg.com/vi/N9gWOj8UVTU/mqdefault.jpg)




![PhysX3D [GRAVITY SIMULATION] Portraits of the Planets
Es wurde wirklich Zeit, die Rotation von Himmelskörpern in PhysX3D einzubauen. Die dazu notwendigen Daten für die Planeten unseres Sonnensystems zu bekommen stellte sich als Herausforderung heraus. Die Inklination der Rotationsachse und die Rotationsperiode zu finden war leicht, aber um die Rotationsachse korrekt definieren zu können, wird noch einen weiterer Winkel benötigt: die Rektaszension.
Außerdem hat Saturn seine charakteristischen Ringe bekommen.
Mehr Informationen auf: http://www.projectphysx.de
Musik: John Murphy - Sunshine (Adagio in d Minor) PhysX3D [GRAVITY SIMULATION] Portraits of the Planets](https://i.ytimg.com/vi/O1cLkJP2nfk/mqdefault.jpg)




