Uploaded February 2025 | Updated September 2026, 2 weeks ago
Starting new testing and the question of how long does it take to get to the center has me asking.... Lets find out.
👉 "Voron Standard"
Layer Height - .2mm
Line Width - Forced .4mm
Wall Loops - 4
Top & Bottom Layers - 5 - Monotonic
Infill - 30% 3D Honeycomb
Internal Solid Infill - Monotonic
✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1
✅ Important Links:
👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226
✅ Stay Connected With Me:
👉 (X)Twitter : twitter.com/edgeof3d
==============================
✅ Other Videos You Might Be Interested In Watching:
👉 Testing Polymaker Fiberon: youtu.be/XGWeNbi0SmM
👉 Polymaker Fiberon PPS-CF and Heat Sets: youtu.be/jQvWjAtcGvU
👉 Annealing Fiberon PPS-CF10: youtu.be/Kx286aI1Dz0
👉 Tensile Tester V2.0: youtu.be/6uixaw8MtsU
👉Polymaker Fiberon PA6-CF and PA12-CF In the Oven: youtu.be/G8NLKRwnYGU
=============================
✅ About EDGE OF 3D:
Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.
For Collaboration and Business inquiries, please use the contact information below:
📩 Email: catalinaflyer@gmail.com
🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1
=====================
#3dprinting #polymaker #petgcf #ppscf #petcf #fiberon #panchroma #voron #creality #bambu #makers #filament
Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research.
Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use
© EDGE OF 3D
Starting new testing and the question of how long does it take to get to the center has me asking.... Lets find out.
👉 "Voron Standard"
Layer Height - .2mm
Line Width - Forced .4mm
Wall Loops - 4
Top & Bottom Layers - 5 - Monotonic
Infill - 30% 3D Honeycomb
Internal Solid Infill - Monotonic
✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1
✅ Important Links:
👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226
✅ Stay Connected With Me:
👉 (X)Twitter : twitter.com/edgeof3d
==============================
✅ Other Videos You Might Be Interested In Watching:
👉 Testing Polymaker Fiberon: youtu.be/XGWeNbi0SmM
👉 Polymaker Fiberon PPS-CF and Heat Sets: youtu.be/jQvWjAtcGvU
👉 Annealing Fiberon PPS-CF10: youtu.be/Kx286aI1Dz0
👉 Tensile Tester V2.0: youtu.be/6uixaw8MtsU
👉Polymaker Fiberon PA6-CF and PA12-CF In the Oven: youtu.be/G8NLKRwnYGU
=============================
✅ About EDGE OF 3D:
Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.
For Collaboration and Business inquiries, please use the contact information below:
📩 Email: catalinaflyer@gmail.com
🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1
=====================
#3dprinting #polymaker #petgcf #ppscf #petcf #fiberon #panchroma #voron #creality #bambu #makers #filament
Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research.
Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use
© EDGE OF 3D
