Uploaded October 2026 | Updated November 2026, 2 days ago
A little update on what's happening in the EDGE OF 3D workshop, including one of the biggest and most ambitious 3D printing projects I've taken on: the CT130 crawler crane designed by CT3DDesign!
This is no ordinary 3D printed model. We're talking about **378 individual STL files, approximately 978 printed parts, and over 1,000 individual hardware fasteners** before we even start counting motors, bearings, shafts, and electronics.
And that's just the main crane!
In this video, I'll share some progress on the CT130 build, discuss the scale of this project, and catch everyone up on some of the other things happening around the workshop.
As always, this isn't a sponsored sales pitch. Just a look at the projects I'm working on because they're things I genuinely enjoy building.
=============================
ποΈ CT130 CRAWLER CRANE PROJECT
Designed by CT3DDesign, the CT130 is an incredibly detailed, functional, 3D printable crawler crane featuring motorized functions, tracked undercarriage, intricate structural components, and multiple boom configurations.
**PROJECT BY THE NUMBERS:**
β’ 378 individual STL files
β’ Approximately 978 printed components
β’ 970 screws
β’ 65 hex nuts
β’ 6 gear motors (3Γ 6 RPM, 1Γ 20 RPM, 2Γ 40 RPM)
β’ 4 required bearings, plus 15 optional bearings
β’ 1 four-pin slip ring
β’ 9 threaded shafts
β’ 2 lengths of 1mm polyester cord, 100 meters each
β’ A whole lot of printing, assembly, and patience!
**FILAMENT:**
Every printed component in this project is being produced using Polymaker PETG.
**CT3DDesign on Cults3D:**
cults3d.com/en/users/CT3Ddesign/3d-models
The CT130 is a paid model. Support the original designer by purchasing the files directly through CT3DDesign.
=============================
π§ͺ EO3D LABS MATERIALS TESTING DATABASE
Explore real-world mechanical testing results for hundreds of 3D printing materials, including tensile strength, impact resistance, heat performance, and more.
testing.eo3dlabs.com
The database will remain available through July 31, 2027.
=============================
π§΅ POLYMAKER FILAMENT
Polymaker PETG is being used for the entire CT130 project.
Shop Polymaker filament using my affiliate link:
shop.polymaker.com/EDGE_OF_3D
Discount Code: EDGE_OF_3D
Purchases through this link help support EDGE OF 3D at no additional cost to you.
=============================
π AMAZON STOREFRONT
Looking for some of the tools, equipment, and accessories used around the EDGE OF 3D workshop?
amazon.com/shop/edgeof3d
As an Amazon Associate, I earn from qualifying purchases.
=============================
β SUPPORT EDGE OF 3D
If you enjoy the content and would like to help support future projects, you can buy me a coffee!
ko-fi.com/edgeof3d
Every bit of support helps keep the machines running and the projects moving forward.
=============================
π SUBSCRIBE TO EDGE OF 3D
Practical 3D printing, engineering projects, materials testing, machine reviews, and whatever else catches my interest.
No hype. No nonsense. Just real-world experiences from the workshop.
youtube.com/c/EDGEOF3D
=============================
π STAY CONNECTED
YouTube:
youtube.com/c/EDGEOF3D
Instagram:
instagram.com/edgeof3d
TikTok:
tiktok.com/@edge_of_3d
X / Twitter:
twitter.com/edgeof3d
EO3D Labs:
eo3dlabs.com
Business Inquiries:
scott@eo3dlabs.com
=============================
π§ ABOUT EDGE OF 3D
EDGE OF 3D is an independent 3D printing channel focused on practical projects, mechanical testing, equipment, and real-world experiences.
I share what works, what doesn't, and what I learn along the way.
Not every project needs to be a review, and not every video needs a sponsor. Sometimes I just want to build something ridiculously complicated because I can.
=============================
β οΈ DISCLOSURE
This video reflects my personal experience, opinions, and observations.
Some links may be affiliate links, which means I may earn a small commission at no additional cost to you.
Always follow equipment manufacturers' recommendations and appropriate safety procedures.
Β© 2026 EDGE OF 3D / EO3D Labs. All rights reserved.
#CT130 #CT3DDesign #3DPrinting #3DPrintedCrane #CrawlerCrane #RCConstruction #RCConstructionEquipment #ScaleModel #Functional3DPrinting #3DPrintedModels #3DPrintingProjects #Polymaker #PolymakerPETG #PETG #FDMPrinting #3DPrintedParts #EngineeringProjects #ModelEngineering #HeavyEquipment #CraneModel #DIYProjects #MakerCommunity #EDGEOF3D #EO3DLabs
A little update on what's happening in the EDGE OF 3D workshop, including one of the biggest and most ambitious 3D printing projects I've taken on: the CT130 crawler crane designed by CT3DDesign!
This is no ordinary 3D printed model. We're talking about **378 individual STL files, approximately 978 printed parts, and over 1,000 individual hardware fasteners** before we even start counting motors, bearings, shafts, and electronics.
And that's just the main crane!
In this video, I'll share some progress on the CT130 build, discuss the scale of this project, and catch everyone up on some of the other things happening around the workshop.
As always, this isn't a sponsored sales pitch. Just a look at the projects I'm working on because they're things I genuinely enjoy building.
=============================
ποΈ CT130 CRAWLER CRANE PROJECT
Designed by CT3DDesign, the CT130 is an incredibly detailed, functional, 3D printable crawler crane featuring motorized functions, tracked undercarriage, intricate structural components, and multiple boom configurations.
**PROJECT BY THE NUMBERS:**
β’ 378 individual STL files
β’ Approximately 978 printed components
β’ 970 screws
β’ 65 hex nuts
β’ 6 gear motors (3Γ 6 RPM, 1Γ 20 RPM, 2Γ 40 RPM)
β’ 4 required bearings, plus 15 optional bearings
β’ 1 four-pin slip ring
β’ 9 threaded shafts
β’ 2 lengths of 1mm polyester cord, 100 meters each
β’ A whole lot of printing, assembly, and patience!
**FILAMENT:**
Every printed component in this project is being produced using Polymaker PETG.
**CT3DDesign on Cults3D:**
cults3d.com/en/users/CT3Ddesign/3d-models
The CT130 is a paid model. Support the original designer by purchasing the files directly through CT3DDesign.
=============================
π§ͺ EO3D LABS MATERIALS TESTING DATABASE
Explore real-world mechanical testing results for hundreds of 3D printing materials, including tensile strength, impact resistance, heat performance, and more.
testing.eo3dlabs.com
The database will remain available through July 31, 2027.
=============================
π§΅ POLYMAKER FILAMENT
Polymaker PETG is being used for the entire CT130 project.
Shop Polymaker filament using my affiliate link:
shop.polymaker.com/EDGE_OF_3D
Discount Code: EDGE_OF_3D
Purchases through this link help support EDGE OF 3D at no additional cost to you.
=============================
π AMAZON STOREFRONT
Looking for some of the tools, equipment, and accessories used around the EDGE OF 3D workshop?
amazon.com/shop/edgeof3d
As an Amazon Associate, I earn from qualifying purchases.
=============================
β SUPPORT EDGE OF 3D
If you enjoy the content and would like to help support future projects, you can buy me a coffee!
ko-fi.com/edgeof3d
Every bit of support helps keep the machines running and the projects moving forward.
=============================
π SUBSCRIBE TO EDGE OF 3D
Practical 3D printing, engineering projects, materials testing, machine reviews, and whatever else catches my interest.
No hype. No nonsense. Just real-world experiences from the workshop.
youtube.com/c/EDGEOF3D
=============================
π STAY CONNECTED
YouTube:
youtube.com/c/EDGEOF3D
Instagram:
instagram.com/edgeof3d
TikTok:
tiktok.com/@edge_of_3d
X / Twitter:
twitter.com/edgeof3d
EO3D Labs:
eo3dlabs.com
Business Inquiries:
scott@eo3dlabs.com
=============================
π§ ABOUT EDGE OF 3D
EDGE OF 3D is an independent 3D printing channel focused on practical projects, mechanical testing, equipment, and real-world experiences.
I share what works, what doesn't, and what I learn along the way.
Not every project needs to be a review, and not every video needs a sponsor. Sometimes I just want to build something ridiculously complicated because I can.
=============================
β οΈ DISCLOSURE
This video reflects my personal experience, opinions, and observations.
Some links may be affiliate links, which means I may earn a small commission at no additional cost to you.
Always follow equipment manufacturers' recommendations and appropriate safety procedures.
Β© 2026 EDGE OF 3D / EO3D Labs. All rights reserved.
#CT130 #CT3DDesign #3DPrinting #3DPrintedCrane #CrawlerCrane #RCConstruction #RCConstructionEquipment #ScaleModel #Functional3DPrinting #3DPrintedModels #3DPrintingProjects #Polymaker #PolymakerPETG #PETG #FDMPrinting #3DPrintedParts #EngineeringProjects #ModelEngineering #HeavyEquipment #CraneModel #DIYProjects #MakerCommunity #EDGEOF3D #EO3DLabs










