I Tested LDO’s ASA, ASA-CF and ABS So You Don’t Have To @EDGEOF3D
I Tested LDO’s ASA, ASA-CF and ABS So You Don’t Have To  @EDGEOF3D
Uploaded June 2026 | Updated November 2026, 15 hours ago
LDO may not be the first name people think of when it comes to filament, but they are already well known in the 3D printing hardware space. So I wanted to find out how their materials actually perform when put through real testing.

In this video, I test LDO ASA, LDO ASA-CF, and LDO ABS using my standard EDGE OF 3D materials testing process. That means no marketing fluff, no “it feels strong,” and no pretending a spec sheet tells the whole story.

We’re looking at real-world performance, heat resistance, strength, layer behavior, and how these materials compare against each other in the EO3D materials testing database.

Is ASA-CF actually the obvious winner?
Does plain ASA hold its own?
And where does ABS land against both?

Let’s test it.

=============================

Materials Tested / Links

LDO ASA Filament at Fabreeko:
fabreeko.com/products/olive-green-asa-by-ldo-filament-1kg-spool-ams-friendly

LDO ASA-CF Filament at Fabreeko:
fabreeko.com/products/ldo-asa-cf-filament-ams-friendly-1kg-black

LDO ABS Filament at Fabreeko:
fabreeko.com/products/black-abs-by-ldo-filament-1kg-spool-ams-friendly-1

=============================

EDGE OF 3D Links

Materials Testing Chart:
testing.eo3dlabs.com

Support the channel on Ko-fi:
ko-fi.com/edgeof3d

YouTube:
youtube.com/c/EDGEOF3D

Instagram:
instagram.com/edgeof3d

TikTok:
tiktok.com/@edge_of_3d

=============================

This testing is comparative and based on my own repeatable test methods. The goal is not to replace manufacturer data sheets or standardized lab testing, but to give practical, apples-to-apples results across materials tested the same way, on the same equipment, with the same process.

=============================

#3DPrinting #FilamentTesting #ASA #ABS #ASACF #LDOFilament #Fabreeko #EngineeringFilament #MaterialsTesting #Voron #3DPrinter #EDGEOF3D #EO3DLabs #ldomotors
I Tested LDO’s ASA, ASA-CF and ABS So You Don’t Have To3D-Fuel PET-CF Tested — Then the HDT Rabbit Hole Got DEEP!Milo Mill Making Noise | EDGE OF 3DFiberon PPS-CF - Is It The Best Filament | EDGE OF 3DMore Siraya Tech Filaments!! | EDGE OF 3DPolymaker Fiberon PET-GF15 Launch! | EDGE OF 3DZERO G Mercury One.1RMRRF Top Fuel Dragster OverviewMERCURY ONE.1 Full Build Video 5.5 X-Joints & EVA Tool-HeadERCF Final Calibration ShortLiberNovo Omni Review | I Actually Fell Asleep in This $1,000 ChairEdge of 3D has landed in Taipei
EDGE OF 3D |

I Tested LDO’s ASA, ASA-CF and ABS So You Don’t Have To

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER