Uploaded March 2019 | Updated September 2026, 15 hours ago
#Rockets #thermodynamics #spacetravel #nasa
Hey Everyone!
This video covers the basics of liquid rocket engines and how the combustion process works. Liquid rocket engines are typically a fuel and an oxidizer which mix together in a combustion chamber, before entering the nozzle where it is accelerated to supersonic speeds. This video covers the following topics:
1) Combustion Cycles - Pressure Fed, Gas-Generator, Staged Combustion
2) Architecture of a liquid engine - turbopump, injector, combustion chamber, nozzle, regenerative cooling
3) Combustion Instabilities (slosh, vibration) in liquid engines (brief)
4) Atomization - What it is and why it is so important
Thanks for watching and be sure to subscribe for more videos like this.
Best Wishes,
My Instagram: instagram.com/vinayak_desh
My Website: vinayakd.com
Sources:
Sutton and Biblarz: Rocket Propulsion Elements Textbook
Liquid Propulsion Fundamentals: ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20140002716.pdf
Liquid Rocket Engine (NASA): grc.nasa.gov/www/k-12/rocket/lrockth.html
Importance of Simulation for Rocket Propulsion Design: ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20120016698.pdf
What is Atomization? wwwd.graco.com/training/concept_and_theory/Atomization%20v2.pdf
P.S. Hit a like for the new intro!
#Rockets #thermodynamics #spacetravel #nasa
Hey Everyone!
This video covers the basics of liquid rocket engines and how the combustion process works. Liquid rocket engines are typically a fuel and an oxidizer which mix together in a combustion chamber, before entering the nozzle where it is accelerated to supersonic speeds. This video covers the following topics:
1) Combustion Cycles - Pressure Fed, Gas-Generator, Staged Combustion
2) Architecture of a liquid engine - turbopump, injector, combustion chamber, nozzle, regenerative cooling
3) Combustion Instabilities (slosh, vibration) in liquid engines (brief)
4) Atomization - What it is and why it is so important
Thanks for watching and be sure to subscribe for more videos like this.
Best Wishes,
My Instagram: instagram.com/vinayak_desh
My Website: vinayakd.com
Sources:
Sutton and Biblarz: Rocket Propulsion Elements Textbook
Liquid Propulsion Fundamentals: ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20140002716.pdf
Liquid Rocket Engine (NASA): grc.nasa.gov/www/k-12/rocket/lrockth.html
Importance of Simulation for Rocket Propulsion Design: ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20120016698.pdf
What is Atomization? wwwd.graco.com/training/concept_and_theory/Atomization%20v2.pdf
P.S. Hit a like for the new intro!









![How to Read and Use Joysticks in MATLAB and Simulink - Step-by-step detailed example!
#joysticks #flightsimulation
2020 Update: At 2:24, I mention that you cannot find the selector block within MATLAB / Simulink browser. I apologize for this. You can find the block, it is called Selector. So go in the Simulink Library Browser, drag the selector block, double click it, set the Input Port Size to 8 (this makes it compatible to work with joysticks). Leave the other parameters as is. You can then select the Index [1 2 3 4] as follows for attitude and thrust.
See this: https://www.mathworks.com/help/simulink/slref/selector.html
Free Udemy Course (Motion Planning): https://www.udemy.com/course/an-introduction-to-sampling-based-motion-planning-algorithms/
Dear Engineering students,
Welcome to my all new tutorial on using a basic USB joystick in MATLAB / Simulink. For this specific tutorial, you must have Simulink 3D Animation installed. However to use a joystick in general, you do not need 3D Animation.
This tutorial covers:
1) Setting up a simple USB joystick
2) Knowing which Simulink blocks use a joystick
3) Using the fundamental joystick controls (yaw, pitch, roll)
4) Mapping joystick axis motion to a CAD file within the VRML world.
5) Testing!!
Note: If you have no experience with Simulink 3D Animation, I highly recommend watch my previous videos explaining the following in more detail.
- VR Signal Expander
- Basic coordinates in Simulink 3D Animation
A lot of people I notice on MATLAB forums as well as YouTube, have difficulty knowing exactly how to import a joystick and map the joystick axes.
Stay tuned for upcoming videos:
- Importing ASSEMBLIES in VRML
- Joystick + PID control
Cheers,
Vin
Joystick used: Logitech Freedom 2.4 Cordless
How to use Simulink 3D Animation: https://www.youtube.com/watch?v 9d8jYzLpg
~~My Udemy Courses on Motion Planning / Navigation / Trajectory Planning:
https://www.udemy.com/course/autonomous-robots-nonholonomic-motion-planning-algorithms/
Buy Coffee: https://buymeacoffee.com/vdengineering
My Instagram: https://www.instagram.com/vinayak_desh/
My Website: https://www.vinayakd.com/ How to Read and Use Joysticks in MATLAB and Simulink - Step-by-step detailed example!](https://i.ytimg.com/vi/A7KkciHn0jc/mqdefault.jpg)
