Homebrew Radio for POTA and FT 8 @N6QW
Homebrew Radio for POTA and FT 8  @N6QW
Uploaded October 2026 | Updated November 2026, 3 hours ago
The current drivers in the ham radio hobby are POTA (Parks on the Air) and FT-8.

You can actually build a modern radio that can achieve both of those goals without spending a fortune or apologize for something that looks like a hunk of junk. At my age I have also found these modes are indeed chick magnets. (More than one "granny" has been turned on by the Juliano Blue front panel!)

The heart of the rig is the IF Module featuring the Plessey Bilateral Amp stage as found in EMRFD. SMD parts are used extensively in this radio

This is not a beginners rig so few will ever be constructed. But what it does demonstrate that it can be done. You will need the N6QW Digital Adapter to do FT-8.

There is no AGC in the radio and you need to crank back the volume on strong signals. The ILI 9341 display sure adds a modicum of panache to the finished radio

73's
Pete N6QW
Homebrew Radio for POTA and FT 8Arduino Part 2Yaesu FTdx100 SSB Transceiver from 1966TR-7 Resurrection Part 3(7)FT 101EE ~ An Iconic SSB Transceiver.  Hundreds of Thousands were MadeField Day 2022 as heard on my Homebrew Wireless SetSwan SW 140. Relive the Golden Days of Yesteryears!FT-8 with the Raspberry Pi Zero WPMR6A Receiver ~ When you know stuff, you can do stuffHam Radio is in the ToiletThe Drake Twins   R4A and T4XMHST with Driver Stage
Pete Juliano |

Homebrew Radio for POTA and FT 8

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER