3D-PrintCreator | ▼ Hide flaws in your 3D Print | Best looking 3D prints EVER !!! @3dPrintCreator | Uploaded February 2019 | Updated October 2024, 18 hours ago.
We all sometimes suffer from a print that is just not quite beautiful because we had settings wrong or because we have a small defect on the printer.
In order to be able to use these failed prints, you can now buy beautiful spray paint that can be perfectly used to mask errors in your 3D prints. The paint that I am talking about is a textured paint that you apply with a spray can.
The structure paint is originally intended to be able to repair walls with a structure stucco after, for example, drilling a hole, but we are going to apply it in a completely different way.
The painted structure keeps fine on PLA and NGEN prints and is therefore easy to apply. Make sure there is no grease on the print, such as skin grease. If this is the case, clean the print with alcohol or an ammonia solution. Then you can apply the paint structure as a sprayer like any other spray paint.
After the drying time, you can apply a second layer, if you want a finer structure, or you can finish the layer with varnish. After this, you can apply any colors or other artistic layers.
With best regards,
Brian 3D-PrintCreator
▼ Buy me a coffee: support.3d-printcreator.com
▼ Visit my website: 3d-printcreator.com
▼ See the best monthly deals: 3d-printcreator.com/best-monthly-3d-printing-deals
▼ The original Venetian Mask of bq3D
thingiverse.com/thing:1084182
▼ The Remix of Wabah58 I used
thingiverse.com/thing:2885862
See all contact details in the info below:
▼ Subscribe to me on YouTube:
subscribe.3d-printcreator.com
▼ Find me on Thingiverse:
thingiverse.3d-printcreator.com
▼ Follow me on Twitter:
twitter.3d-printcreator.com
Keywords for this video:
#stucturedpaint #painting #3DPrintCreator
Thanks for watching this video.
We all sometimes suffer from a print that is just not quite beautiful because we had settings wrong or because we have a small defect on the printer.
In order to be able to use these failed prints, you can now buy beautiful spray paint that can be perfectly used to mask errors in your 3D prints. The paint that I am talking about is a textured paint that you apply with a spray can.
The structure paint is originally intended to be able to repair walls with a structure stucco after, for example, drilling a hole, but we are going to apply it in a completely different way.
The painted structure keeps fine on PLA and NGEN prints and is therefore easy to apply. Make sure there is no grease on the print, such as skin grease. If this is the case, clean the print with alcohol or an ammonia solution. Then you can apply the paint structure as a sprayer like any other spray paint.
After the drying time, you can apply a second layer, if you want a finer structure, or you can finish the layer with varnish. After this, you can apply any colors or other artistic layers.
With best regards,
Brian 3D-PrintCreator
▼ Buy me a coffee: support.3d-printcreator.com
▼ Visit my website: 3d-printcreator.com
▼ See the best monthly deals: 3d-printcreator.com/best-monthly-3d-printing-deals
▼ The original Venetian Mask of bq3D
thingiverse.com/thing:1084182
▼ The Remix of Wabah58 I used
thingiverse.com/thing:2885862
See all contact details in the info below:
▼ Subscribe to me on YouTube:
subscribe.3d-printcreator.com
▼ Find me on Thingiverse:
thingiverse.3d-printcreator.com
▼ Follow me on Twitter:
twitter.3d-printcreator.com
Keywords for this video:
#stucturedpaint #painting #3DPrintCreator
Thanks for watching this video.