Uploaded May 2017 | Updated November 2026, 2 days ago
Messing with four modules. Making progress!
Eventually I hope to have a whole giant analog modular groovebox that will enable me to perform music in infinite variety, thunderous bass, with sounds never before heard...
Links to these circuits, almost all point-to-point, some with paper "circuit boards":
Atari Punk Console -- I added an attenuator potentiometer to the output of this. The voltage control I'm using is going to the top half of the 556... I THINK.... and I think it's holding the voltage to ground until I push the button. This circuit goes *lower* on higher voltage, and the super weird frequency divisions are just amazing to listen to.
instructables.com/id/Build-an-Atari-Punk-circuit-on-a-breadboard
Portamento module, a slew rate limiter, basically a ridiculously "strong" low pass filter. I used a 10K pot with a 100uF capacitor for these long slew times.
charlieslick.blogspot.com/2012_08_01_archive.html
Here's the Steiner VCF circuit I used -- I eliminated the variable gain buffer on the output, instead using a potentiometer to replace the two resistors on the input buffer, and running switches to allow me to use any of the three inputs at once. Also didn't put the diodes in the resonance circuit -- probably should have. The self-oscillating can be LOUD. I'll need to put a compressor downstream of this module if I ever play live.
yusynth.net/Modular/Commun/STEINERVCF/VCF-2SC1583-sch.gif
The "keyboard" thing is just three trimmers dividing the voltage to 5, 6, and 7 volts. I should buffer the voltage so it can handle more load but it's just quick and dirty.
Messing with four modules. Making progress!
Eventually I hope to have a whole giant analog modular groovebox that will enable me to perform music in infinite variety, thunderous bass, with sounds never before heard...
Links to these circuits, almost all point-to-point, some with paper "circuit boards":
Atari Punk Console -- I added an attenuator potentiometer to the output of this. The voltage control I'm using is going to the top half of the 556... I THINK.... and I think it's holding the voltage to ground until I push the button. This circuit goes *lower* on higher voltage, and the super weird frequency divisions are just amazing to listen to.
instructables.com/id/Build-an-Atari-Punk-circuit-on-a-breadboard
Portamento module, a slew rate limiter, basically a ridiculously "strong" low pass filter. I used a 10K pot with a 100uF capacitor for these long slew times.
charlieslick.blogspot.com/2012_08_01_archive.html
Here's the Steiner VCF circuit I used -- I eliminated the variable gain buffer on the output, instead using a potentiometer to replace the two resistors on the input buffer, and running switches to allow me to use any of the three inputs at once. Also didn't put the diodes in the resonance circuit -- probably should have. The self-oscillating can be LOUD. I'll need to put a compressor downstream of this module if I ever play live.
yusynth.net/Modular/Commun/STEINERVCF/VCF-2SC1583-sch.gif
The "keyboard" thing is just three trimmers dividing the voltage to 5, 6, and 7 volts. I should buffer the voltage so it can handle more load but it's just quick and dirty.










