Uploaded December 2025 | Updated November 2024, 2 years ago
This video covers getting the replacement UFQFPN-32 version of the MCU soldered on. I cover what I had to check to see that it was compatible with the previous design.
I get the board mostly populated, and then try powering it up for the first time. It doesn't go well, but it also doesn't go badly, either. So I'm considering this a happy bit of progress!
-=] Patreon:
- patreon.com/c/TheDigitalMermaid
-=] Channels that have Helped Me;
* @ProjectBrupeg
* @OffGridGarageAustralia
* @AcornToArabella
* @BillCarlson
-=] Chapters
0:00 - Coming Back From Disaster; UFQFPN vs LQFP
4:32 - On Comments and Feedback
5:28 - Leaded Solder; Why I'm Not Using It
6:58 - Solder Iron Tip Size
7:39 - Flux Types And Concerns
8:28 - El Ejecto Syringo No Fixey. :(
9:54 - Soldering the UFQFPN 32 Package.... *eep*
13:12 - Testing The UGQFPN connections
15:26 - Onward To Through Hole Parts!
16:39 - Timelapse Assembly of Through-Hole Parts
18:35 - Assembly Update 1
20:49 - Assembly Update 2
22:27 - Power Plans, LED Standoffs and MRA Flux
24:06 - Finishing Assembly
25:28 - Final Checks For Shorts And Resistance
29:20 - As Ready As Can Be; Power Up!
30:20 - No Smoke! But No Life, Either. Why?
31:40 - High Voltage; Diagnosing With Andrew
33:49 - Happy Little Failure
This video covers getting the replacement UFQFPN-32 version of the MCU soldered on. I cover what I had to check to see that it was compatible with the previous design.
I get the board mostly populated, and then try powering it up for the first time. It doesn't go well, but it also doesn't go badly, either. So I'm considering this a happy bit of progress!
-=] Patreon:
- patreon.com/c/TheDigitalMermaid
-=] Channels that have Helped Me;
* @ProjectBrupeg
* @OffGridGarageAustralia
* @AcornToArabella
* @BillCarlson
-=] Chapters
0:00 - Coming Back From Disaster; UFQFPN vs LQFP
4:32 - On Comments and Feedback
5:28 - Leaded Solder; Why I'm Not Using It
6:58 - Solder Iron Tip Size
7:39 - Flux Types And Concerns
8:28 - El Ejecto Syringo No Fixey. :(
9:54 - Soldering the UFQFPN 32 Package.... *eep*
13:12 - Testing The UGQFPN connections
15:26 - Onward To Through Hole Parts!
16:39 - Timelapse Assembly of Through-Hole Parts
18:35 - Assembly Update 1
20:49 - Assembly Update 2
22:27 - Power Plans, LED Standoffs and MRA Flux
24:06 - Finishing Assembly
25:28 - Final Checks For Shorts And Resistance
29:20 - As Ready As Can Be; Power Up!
30:20 - No Smoke! But No Life, Either. Why?
31:40 - High Voltage; Diagnosing With Andrew
33:49 - Happy Little Failure
![Helm Control Build; Well 🦆 - Ep. 120
Despite all the reviews, I somehow missed that I chose the footprint for the UFQFPN-32 (ultra-fine pitch quad flat pack no pin) STM32 C092RC MCU. I planned to use, and ordered, the LQFP-32 (low-profile quad flat pack) part. That was much bigger and had normal lets. It wasnt until I was literally about to solder the MCU on that I realised the mistake I made.
After I stopped recording, the amazing folks on discord got me to look for the FPN version of the MCU, which I found and loaded into STM32CubeMX. I was able to configure the pinout to match, so the game is back on!
Its going to be a lot harder to solder this part, but I already mentally assumed the PCBs were trash, so I dont have much to lose. As I upload this, Ive not yet tried to solder it. So well see how that goes in the next video.
] Patreon:
- https://www.patreon.com/c/TheDigitalMermaid
] Channels that have Helped Me;
* @ProjectBrupeg
* @OffGridGarageAustralia
* @AcornToArabella
* @BillCarlson
] References;
Soldering Multi Holder, print in place
- https://makerworld.com/en/models/1057596-soldering-multi-holder-print-in-place#profileId-1045304
] Chapters
0:00 - Getting Setup For Soldering
2:30 - Finding Pin 1 On The First Chip
4:06 - Soldering The First 64 KiB EEPROM
8:11 - Testing The Solder Joints
8:52 - Therapist Mae To The Rescue
9:42 - Fixing An Unconnected Pin
10:55 - Fixing Another Unconnected Pin
11:57 - Hot Air Station To The Rescue?
13:06 - Fixed! Verifying All Pins Are Connected Still
14:16 - On To Chip 2; The Second EEPROM
16:06 - Testing Chip 2
16:37 - Success! But I Can Do Better
18:14 - First Two Done...
19:20 - Amazing 3D Printed Helping Hands!
19:57 - Day 2; The Plan For Today
21:46 - Tweezer Practice
22:11 - Setting Up The Paste Syringe (Foreshadowing)
23:06 - When You Dont RTFM, Your Tools Wont Work Right
24:39 - Did The Solder Paste Work?
25:28 - Madi Falls In Love
25:51 - The Syringe Failed. THE SYRINGE! WTF
27:45 - Figuring Out The Hot Air Station / Soldering The LED Driver
30:46 - Testing The IS31FL3731 Solder Job
32:30 - Soldering The STM32 C092RC
33:13 - Or Not. ;_; Helm Control Build; Well 🦆 - Ep. 120](https://i.ytimg.com/vi/crCwgTj0MRk/mqdefault.jpg)
![The PCBs Are Here! Who Made Them? - Ep. 119
The boards are here! This is a short video to show the initial impressions, and it covers why I chose JLCPCB, and why I chose S1000H fiberglass as the substrate.
] Patreon:
- https://www.patreon.com/c/TheDigitalMermaid
] Channels that have Helped Me;
* @ProjectBrupeg
* @OffGridGarageAustralia
* @AcornToArabella
* @BillCarlson
] References;
KiCAD Discord and IRC;
- https://www.kicad.org/community/chat/
@RobertFeranec - Walking Through a Big PCB Factory in China | PCB Manufacturing | JLCPCB
- https://www.youtube.com/watch?v=jTBOSob5MLg
S1000H TG-155 Spec Sheet
- https://pcbwayfile.s3.us-west-2.amazonaws.com/web/231212/Shengyi_S1000H.pdf
FR-4 (Laminated Plastics) Spec Sheet
- https://laminatedplastics.com/fr-4.pdf
ENIG (Electroless nickel immersion gold)
- https://en.wikipedia.org/wiki/Electroless_nickel_immersion_go
Big Clives Youtube Channel (@bigclivedotcom)
- https://www.youtube.com/user/bigclivedotcom
] Chapters
0:00 - The PCBs And Parts Are Here
0:28 - Three Options; NextPCB, PCBWay, and JLCPCB
1:33 - PCB Substrate Options; FR4 vs S1000H
2:17 - ENIG; Electroless Nickel Immersion Gold
3:22 - The NextPCBs Experience Was ... A Thing
4:10 - PCBWay; Great Checks, But Expensive
5:24 - Why I Chose JLCPCB
5:53 - Unboxing the PCBs
7:21 - First Look At The Battery Display Board / Silkscreen Quality
10:00 - First Look At The Relay Board
11:55 - First Look At The Compass Rose / Helm Cabinet Plans
13:31 - First Look At The MCU Board / Space Efficiency
15:02 - Trials Of Reworking Through-Hole Parts
16:46 - Whats Next? The PCBs Are Here! Who Made Them? - Ep. 119](https://i.ytimg.com/vi/cKswo6h_wWA/mqdefault.jpg)
![Helm Control PCBs - Ep. 118
Ive been quiet on Youtube recently, but not for lack of work on the boat! This video shows what Ive been up to. With the significant help of Patrons and friends, I have four new PCBs on order. These will be the helm control boards for Mermaids Rest.
In the coming videos, well assemble and start writing the code. This video shows how the boards will work, at a high level, and some of the challenges I had to overcome. More than anything, all Ive learned to make these boards have a chance of being reliable over the journeys to come.
A super huge and special thank you to the folks on Patreon. Their knowledge and patience is beyond description!
] Patreon:
- https://www.patreon.com/c/TheDigitalMermaid
] Channels that have Helped Me;
* @ProjectBrupeg
* @OffGridGarageAustralia
* @AcornToArabella
* @BillCarlson
] References;Charlieplexing
- https://en.wikipedia.org/wiki/Charlieplexing
Adafruit Charlieplexer
- https://www.adafruit.com/product/2946
ST Nucleo-C092RC
- https://www.st.com/en/evaluation-tools/nucleo-c092rc.html
Lumissil IS31FL3731
- https://www.lumissil.com/assets/pdf/core/IS31FL3731_DS.pdf
Scotopic (Night) Vision
- https://en.wikipedia.org/wiki/Scotopic_vision
ST STM32C092KCT6
- https://www.st.com/resource/en/datasheet/stm32c091cc.pdf
STLINK-V3SET
- https://www.st.com/resource/en/data_brief/stlink-v3set.pdf
NMEA 2000 / N2K
- https://en.wikipedia.org/wiki/NMEA_2000
GitHub - Mermaids Rest - Full Boards
- https://github.com/digimer/Mermaids-Rest/tree/main/Full%20Boards
CC BY-NC-SA 4.0 - Attribution-NonCommercial-ShareAlike 4.0 International
- https://creativecommons.org/licenses/by-nc-sa/4.0/deed.en
GPLv3 - GNU General Public License v3
- https://www.gnu.org/licenses/gpl-3.0.en.html
Bill of Materials - Google Sheets
- https://docs.google.com/spreadsheets/d/1s2RV25Aqq35Ps_foCP7-pKksEfrfetYYAbn-AQ_H0tk/edit?usp=sharing
Cassette Futurism
- https://aesthetics.fandom.com/wiki/Cassette_Futurism
TI MAX3232EIPWRQ1
- https://www.ti.com/lit/ds/symlink/max3232e-q1.pdf?ts=1736232244138
FD CAN bus
- https://en.wikipedia.org/wiki/CAN_FD
ST M24C64-RMN6P - 64 KiB EEPROM
- https://www.st.com/resource/en/datasheet/m24c64-f.pdf
I2C (Inter-Integrated Circuit) Bus
- https://en.wikipedia.org/wiki/I2C
SPI (Serial Peripheral Interface)
- https://en.wikipedia.org/wiki/Serial_Peripheral_Interface
GPIO (General Pupose Input/Output)
- https://en.wikipedia.org/wiki/General-purpose_input/output
Gerber File Format
- https://en.wikipedia.org/wiki/Gerber_format
KiCAD
- https://www.kicad.org/
Ep. 98 - The Motors Spin!
- https://www.youtube.com/watch?v=ylXH46X1Iwk
ST STM32G474RET3
- https://www.st.com/en/microcontrollers-microprocessors/stm32g474re.html
MCP4726 DAC
- https://ww1.microchip.com/downloads/en/DeviceDoc/22272C.pdf
4N25 Opto-isolator
- https://www.vishay.com/docs/83725/4n25.pdf
JTAG
- https://en.wikipedia.org/wiki/JTAG
] Chapters
0:00 - A Small Diversion That Wasnt Small. At All.
2:00 - Feature Creep Is A Thing / Patreon Thanks
3:40 - Scotopic vision and Red LEDs
4:27 - Well, Why Dont You Just...
5:58 - Power Isolation On A PCB
7:06 - Everything Is Open Source, Hack Away!
8:16 - So Many Voltages
10:23 - Cassette Futurism and Serial Ports
11:47 - MCU, NMEA2000/CANbus, EEPROM
12:58 - The I2C and SPI Busses
14:04 - GPIO Pin Protection; When Wires Are Antennas
16:12 - Pull Up and Pull Down Resistors
17:51 - Schematics And NetNames
19:55 - High-Level Overview of Charlieplexing
23:19 - PCB Routing; The Compass Rose PCB
26:44 - Putting Part On Both Sides Of The PCB; Why?
28:36 - DRC; Design Rule Checked - The Most Annoying Good Thing
29:14 - KiCAD Has A Great Community
29:49 - 3D Renders!
31:47 - Thermal Management
32:47 - Fixing A Small Mistake; Schematic to PCB
35:13 - The Next PCB; The Main Control Unit
39:57 - Optoisolators; Theyre Basically Magic
40:39 - Accurate Indication With Coarse LEDs
42:10 - D-Sub Connectors. SO MANY D-SUB!
45:32 - E-Stop Logic
46:31 - My Diesel Is Gone, I Got A New Diesel
49:01 - The MCU PCB And Field Repairability
50:51 - MCU Controlled Relays And Inductive Loads
52:24 - Battery Display Board; Electric Propulsion to ABYC Standards
54:58 - Relay Unit; Super Efficient Digital Switching!
1:00:40 - Whats Next?
] Music Attribution
Eighties Action by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 licence. https://creativecommons.org/licenses/by/4.0/
Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100243
Artist: http://incompetech.com/
Touchpoint by Audionautix is licensed under a Creative Commons Attribution 4.0 licence. https://creativecommons.org/licenses/by/4.0/
Artist: http://audionautix.com/
Inner Journey by Audionautix is licensed under a Creative Commons Attribution 4.0 licence. https://creativecommons.org/licenses/by/4.0/
Artist: http://audionautix.com/ Helm Control PCBs - Ep. 118](https://i.ytimg.com/vi/flZ6uh32IbI/mqdefault.jpg)
![Bilge Pumps, Take 2 - Ep. 117.1
This is a short (for me) video following up on the last video. The lay-flat 2 / 5cm hose was a bad idea, and so now its gone.
] Patreon:
- https://www.patreon.com/c/TheDigitalMermaid
] Channels that have Helped Me;
* @ProjectBrupeg
* @OffGridGarageAustralia
* @AcornToArabella
* @BillCarlson
] References;
Rule IL200
* https://www.xylem.com/en-us/products services/pumps-packaged-pump-systems/pumps/submersible-pumps/slimline-pumps/slimline-pumps/
Rule Manual (No check valve source)
* https://www.xylem.com/siteassets/brand/rule/resources/manual/rule-360-2000-standard-bilge-iom.pdf
] Chapters
0:00 - Whats Going On Here?
1:16 - Draining The Tanks
3:05 - Pump Test, Success!
4:22 - The Problem Of No Check-Valves
6:09 - The Solution To No Check-Valves
] Music Attribution
Back To The Wood by Audionautix
* licensed under a Creative Commons Attribution 4.0 licence. https://creativecommons.org/licenses/by/4.0/
* Artist: http://audionautix.com/ Bilge Pumps, Take 2 - Ep. 117.1](https://i.ytimg.com/vi/GW5h9RHmTwg/mqdefault.jpg)
![29,000 Lt/Hr (7,680 usg/Hr); Is It Enough? - Ep. 117
Learning from the loss of four different sail boats, I reworked my plans for the bilge pump setup on Mermaids Rest. Is it over the top? Maybe, maybe not.
Ive decided to install three pumps; two electric and a new manual pump;
2,000 GPH / 7,571 LPH - Primary Electric
4,000 GPH / 15,141 LPH - Emergency Backup Electric
1,680 GPH / 6,300 LPH - Manual
This video talks about why I made this choice, and covers the installation and initial testing of the two electric options.
] Patreon:
- https://www.patreon.com/c/TheDigitalMermaid
] Channels that have Helped Me;
* @ProjectBrupeg
* @OffGridGarageAustralia
* @AcornToArabella
* @BillCarlson
] References;
Ocean Cruising Club;
* https://www.oceancruisingclub.org/
Report on the loss of 3 sailing boats during the 2024 Newport Bermuda Race
* https://www.oceancruisingclub.org/home/news/2987
Abandonment of S/Y Gunga Din and Rescue by S/Y Desna
* https://www.ussailing.org/wp-content/uploads/2025/02/Gunga-Din-Inquiry-Report-1.pdf
The Sinking of the Yacht Solution, and the Rescue of her Crew by United States Coast Guard
* https://www.ussailing.org/wp-content/uploads/2025/02/Solution-Inquiry-Report.pdf
The Sinking of the Yacht Alliance, and the Rescue of her Crew by Yacht Ceilidh, Assisted by Yacht Banter
* https://www.ussailing.org/wp-content/uploads/2025/02/Alliance-Ceilidh-Banter-Inquiry-Report.pdf
Rule 1500~4000gph Manual / Performance
* https://www.xylem.com/siteassets/brand/rule/resources/manual/rule-standard-bilge-1500-4000-iom-950-0584a_rev_d.pdf
Ep. 100 - First Off-Shore Passage; Halifax to St. Johns
* https://www.youtube.com/watch?v=ck92gQWUJkg
Buying a Sailboat - Part 1 - Electric Sailboat Conversion (Ep. 30)
* https://youtu.be/lirIIsBJ7Ac?t=522
Duckbill Valve
* https://en.wikipedia.org/wiki/Duckbill_valve
Rule Manual (No check valve source)
* https://www.xylem.com/siteassets/brand/rule/resources/manual/rule-360-2000-standard-bilge-iom.pdf
My 3D Models
* https://makerworld.com/en/@digimer/upload
Draw.io (via google drive);
* https://drive.google.com/file/d/1nYw4l_bMVAKDXD9O1qqpmhFWi6oFRpcq/view?usp=sharing
Comparison of 18-8, 304 and 316 Stainless Steel
* https://marshfasteners.com/difference-18-8-vs-304-vs-316/
Fact Check! “ASTERIA’S FINAL VOYAGE” | GGR 2022
* https://goldengloberace.com/fact-check-asterias-final-voyage-ggr-2022/
ASTERIAS FINAL VOYAGE: The Rescue of Tapio Lehtinen | GGR 2022
* https://www.youtube.com/watch?v=1ERtotP-JRU
#GGR2022Â Tapio and his team talk about WHY ASTERIA SANK?
* https://www.youtube.com/watch?v=M1T2FbFUsuA
* 22:58 is the start of why she might have sunk.
* https://youtu.be/M1T2FbFUsuA?t=1558
Other Channels Mentioned In This Video;
* @OceanCruisingClub
* @Goldengloberace
] Chapters
0:00 - Back in February; A Happy Surprise
2:39 - Taking Lessons From Other Tragedies
4:10 - A New Bilge Plan
6:04 - Preparing to Abandon Ship Before Setting Sail
8:16 - How Did I Get Lucky?
9:36 - April; Pulling The Old Manual Bilge Hose
10:45 - May; Pulling The Old 2000 GPH Pump
12:17 - New Wiring Going In!
16:21 - Notes on Wiring The New 2000 GPH Pump
18:03 - June; Mounting the 4000 GPH Pump
20:07 - I Drilled Through To The Lead Keel...
21:33 - How Am I Going To Fix This?
23:25 - Fixing The Unexpected Holes With Gflex 655
26:19 - Mounting The 4000 GPH Pump Base
28:05 - Replacing The 2000 GPH Pumps Hose
31:23 - Routing The New Hoses; Now and Later
32:21 - The Anti-Siphon Loop; How Duckbill Valves Can Save Your Boat!
33:50 - Madi Is Easily Entertained
35:02 - Splicing In The Anti-Siphon Loop
36:43 - Testing the 2000 GPH
37:01 - Routing the 2 Hose Under The Cabin Sole
38:49 - Removing The Heavy Old Exhaust Hose
40:09 - August; Installing The New Float Switch Plinth
43:19 - Why Dont Bilge Pumps Use Integrated Float Switches?
43:47 - Filling The Holes For The Plinth; Did I Hit A Void?
46:19 - What Next? Lets Wire The New Pump!
52:28 - Installing The Switch Plinth
53:47 - Wiring The Bilge Pump Control Panel
54:33 - New Filming Gear For Christmas?
55:30 - Lessons From The Sinking Of M/Y Asteria
57:15 - Finishing Up Wiring And Initial Electrical Test
58:40 - Ways To Make a 2 Anti-Siphon Loop
59:29 - Replacing The Old Through-Hull
1:02:36 - Routing The 2 Bilge Hose Under
1:03:52 - Time To Flood The Bilge
1:04:49 - Wet Test; Take 1! Nope
1:06:49 - Wet Test; Take 2! Kinda Sorta Success 29,000 Lt/Hr (7,680 usg/Hr); Is It Enough? - Ep. 117](https://i.ytimg.com/vi/5Pd5I3ySEqw/mqdefault.jpg)
![Replacing Parts You Cant Buy Anymore; Bambu Labs X1 Carbon - Ep. 116
C&C Yachts went out of business in the mid 90s. I needed to replace the dorade vent screens in my boat, but I couldnt find them anywhere. So thanks to the support and encouragement of my amazing patreons, I got a 3D printer and learned how to make my own!
] Patreon:
- https://www.patreon.com/c/TheDigitalMermaid
] Channels that have Helped Me;
* @ProjectBrupeg
* @OffGridGarageAustralia
* @AcornToArabella
* @BillCarlson
] References;
@MadeWithLayers - How Bambu has won
* https://www.youtube.com/watch?v=BXwCygjEmis
@TNTBA - How to install Anti-vibration feet on Bambu lab X1 Carbon, P1P, and P1S.
* https://www.youtube.com/watch?v=mE_kAD_YC0A
] Chapters
0:00 - A heartfelt Thank You
0:49 - A Gift From The Patreons
1:55 - Whats In The Box(es)?
3:21 - Bambu Labs X1 Carbon vs Prusa Core One
5:29 - Unboxing The X1 Carbon!
7:47 - Initial Setup Of The Main X1C Body
11:24 - Setup Without The AMS2 Pro
13:12 - Is This Screw Important?
14:11 - First Power Up!
15:36 - Software Setup and QR Code Fail
16:53 - Initial Calibration
18:13 - Unpacking Spares, Worried Kitty
19:35 - Unboxing The AMS 2 Pro
22:27 - Installing The Anti-Vibration Feet
23:07 - Mounting The Filament Buffer
23:17 - Squirrel! Back To Anti-Vibration Feet
25:02 - Connecting and Wiring Up The AMS 2 Pro
28:19 - Powering Up And Loading The AMS2
30:36 - Installing A Refill Filament On A Spool31:34 - Struggling With The Filament Wraps
33:52 - Benchy, My First Print!
38:07 - First Big & Multicolour Print; Poop Shoot!
41:14 - Examining The Poop Shoot
42:37 - Clearing My First Jam
43:33 - Installing The Poop Shoot
44:41 - Getting Comfortable With The Printer!
46:24 - The First Version of the Dorade Vent!
49:58 - Sysadmin Blasphemy
50:53 - Test Assembly of Dorade Vent v1
54:08 - Let Do Take 2
56:01 - Test Assembly of Dorade Vent v2
57:25 - Lets See If It Fits On The Boat!
1:00:27 - Whats Next?
1:01:23 - Our Little, Wonderful Patreon Community
1:04:22 - Post-script; Update On Dad Replacing Parts You Cant Buy Anymore; Bambu Labs X1 Carbon - Ep. 116](https://i.ytimg.com/vi/TTGAdvR-n3k/mqdefault.jpg)
![Breaker Cabinets Made From Scratch - Ep. 115
The old circuit breaker cabinet was too small and rotted out. Lets make a new one, bigger and better!
] Patreon:
- https://www.patreon.com/c/TheDigitalMermaid
] Channels that have Helped Me;
* @ProjectBrupeg
* @OffGridGarageAustralia
* @AcornToArabella
* @BillCarlson
] References;
Epifanes Q&A/FAQ & How-To Videos;
- https://www.epifanes.com/page/q_and_a
- https://www.epifanes.com/page/how-to-videos
Dan Lee Boatbuilding; How to Apply Epifanes Clear Varnish;
- https://www.youtube.com/watch?v=K0PiMZGD5LQ
Travels With Geordie
* @TravelsWithGeordie
Sail Life
* @SailLife
] Image Attribution
Teak end grain;
- https://www.wood-database.com/teak/
] Chapters
0:00 - Whats Needed and Why
1:41 - The Build Plan
3:26 - Avoiding Edge Banding with Mitres
4:53 - Off To A Great Start...
6:25 - Cutting the Mitres
10:19 - Recapping Some Offline Work
14:45 - Test Fitting On The Boat
16:10 - Trimming and Fitting The Wings
20:26 - Plywood Dulls Blades Quickly
21:55 - Adding The Bilge Pump Switches
22:56 - The AC Cabinet / Sub-panel Plans
23:51 - Starting The AC Panel Build
26:39 - Oh Look, I Missed A Step
28:20 - Moar Chamfers!
30:27 - Planning The AC Cutouts
32:05 - Fancy Wood For a Radio Mount
33:38 - Struggling With Layout
35:02 - Making The AC Cutouts
37:25 - Contemplating Finishing
38:08 - Prep For The First Coat of Varnish
40:02 - End Grain; A Bundle of Straws
41:12 - Sanding And Surface Prep
43:52 - Cleaning Before Varnishing
48:01 - Did I Get The Wrong Marine Plywood?
49:02 - Making A Pinboard
49:52 - First Coat Prep; 50/50 Epifanes Mix
52:28 - Applying The First Coat; Colour is Off...
55:04 - Second Day. Second Coat
58:47 - Third Day, Third Coat, Wrong Tool
1:02:19 - Fourth Day, Last Coat?
1:05:50 - Drips, Runs, And Card Scapers
1:09:36 - Why Not More Coats?
1:13:42 - Was Four Coats Enough (For Now?)
1:15:06 - Installing The Main Cabinet!
1:18:18 - New Panel Handles!
1:18:56 - AC Distribution Panel Install; Not Perfect
1:20:30 - Installing The Main DC Breaker
1:22:49 - Rebuilding The First DC Panel
1:25:36 - Finishing Up And Restoring Power! Breaker Cabinets Made From Scratch - Ep. 115](https://i.ytimg.com/vi/RR_8_9IKeBU/mqdefault.jpg)
![Wiring The Boat For International Travel - Ep. 114
To travel the world, I need to be able to plug the boat into international power grids.
In this video, I cover installing a Victron auto-voltage 3600w isolation transformer (ITR3600) and the Victron Multiplus-II 48/5000/70 inverter charger.
Its nice to be working on the boat again!
] Patreon:
- https://www.patreon.com/c/TheDigitalMermaid
] Channels that have Helped Me;
* ‪@ProjectBrupeg‬
* ‪@OffGridGarageAustralia‬
* ‪@AcornToArabella‬
* ‪@BillCarlson‬
] References;
Kids in the Hall - Kraft Dinner Skit
- https://www.youtube.com/watch?v=8TnWIICkBeE
Bowline knot
- By Buz11 - Own work, CC BY-SA 4.0, https://commons.wikimedia.org/w/index.php?curid=112187838
Victron ITR3600 Manual (the good one)
- https://www.victronenergy.com/upload/documents/Isolation_Transformer_3600W_Auto/108939-Isolation_transformers-pdf-en.pdf
Victron Multiplus-II 48/5000/70 Manual
- https://www.victronenergy.com/upload/documents/MultiPlus-II_120V/32424-MultiPlus-II Quattro-II-pdf-en.pdf
] Chapters
0:00 - A Tangled Mess
2:18 - Hoisting the Isolation Transformer
4:53 - Decommissioning the Multiplus Compact
7:06 - Prep Work for the New Equipment
8:54 - Making Space for the Multiplus-II
9:38 - Trying to Mount the Isolation Transformer
12:13 - Hanging the Isolation Transformer, Take 2
17:03 - Hanging the Multiplus-II
20:09 - Its Hung, But Poorly, Lets Try Again.
24:08 - Creative Problem Solving
25:29 - Finish Securing the MP2
26:11 - Planning the Circuit Breaker Panel
28:29 - Wiring the Breaker Panel
32:!5 - Adding an AC Sub-Panel
33:54 - Wiring the Isolation Transformer Input
35:28 - Meeting People; The Reason Im Doing This
36:31 - Wiring the IT Output to Multiplus-II Input
37:37 - Validating Bonding and Isolation of the IT
38:26 - Adding the Critical AC Circuits
40:26 - Cross-Checking The AC Panel Wiring
42:39 - Final Checks
44:38 - Lets Power it Up!
46:23 - Configuring the Multiplus-II
47:04 - Wiring the Phoenix IP43 Charger
49:59 - Finishing Up, Upcoming Videos Wiring The Boat For International Travel - Ep. 114](https://i.ytimg.com/vi/_jPer8K4Mx4/mqdefault.jpg)
![This Can Save Your Life; ELCI/RCBO RCDs - Ep. 113
ELCIs, Equipment Leakage Circuit Interrupters, have been required on boats in North America by ABYC since 2013. They can prevent electric shocks on the boat, as well as prevent ESD, electric shock drowning. These should be retrofitted on to older boats, like mine.
This video attempts to set aside the emotions of ESD and instead explain the physics and biology of what leakage current is, how it causes death, and how an ELCI residual current device can protect you and others from drowning or heart attacks.
] References;
Electric Shock Drowning Association (FAQ)
- https://www.electricshockdrowning.org/esd faq.html
Leviton GFWT2-W 20A WR GFCI
- https://leviton.com/products/gfwt2-w
Carlingtech PBB-BB-24-630-5BA-EG 30A two-pole ELCI
- https://www.mouser.ca/datasheet/2/240/PB_Series_091013-3050214.pdf
] Chapters
0:00 - This Is A Different Video
0:17 - Standard Circuit Breaker Function
0:45 - GFCI (Ground Fault Circuit Interrupter) Function
2:03 - What Could Cause a Delta?
3:14 - How Can a Current Leak Kill You?
3:40 - How Does a GFCI Save Your Life?
4:02 - ELCI (Equipment Leakage Circuit Interrupter) Function
5:38 - Caveat; I Am NOT An Expert
6:14 - Current Takes All Paths to Its Source
7:57 - It Doesnt Take Much to Kill You
8:42 - How Current Can Kill You
10:41 - Fresh Water vs Salt Water
11:36 - Voltage Gradient And The Human Conductor
12:53 - ESD; Electric Shock Drowning
14:07 - Retrofitting Older Boats This Can Save Your Life; ELCI/RCBO RCDs - Ep. 113](https://i.ytimg.com/vi/asAsDWECjKs/mqdefault.jpg)
![A Diesel Engine Takes Flight - Ep. 112
After a winter of stepping over (and slipping off of) the engine every time I was on the boat, its finally out! I was too cheap to buy an engine hoist, so I had to figure out a way to get the engine up out of the vroom vroom truck and down onto my hand truck.
] Patreon:
- https://www.patreon.com/TheDigitalMermaid
] Channels that have Helped Me;
* @ProjectBrupeg
* @OffGridGarageAustralia
* @AcornToArabella
* @BillCarlson
] Chapters
0:00 - Back on the Boat
0:33 - The Travel Lifts Smallest Load
4:43 - Enjoying The Small Things In Life, Stairs!
5:50 - The Plan To Get The Engine Out of the Truck
7:25 - Not My First Rodeo
8:25 - Figuring Out the Rigging
10:31 - Lets Lift! Or Maybe Not...
13:13 - Near Miss
13:49 - A New Plan is Needed
15:05 - The New Plan
16:27 - Re-rigging
19:36 - Lets Lift, Again!
21:38 - Low Level Flying
22:06 - Bringing Her in to Land
23:47 - Its Down!
24:33 - Whats Next For the Ol Diesel?
26:43 - A Note on Upcoming Videos A Diesel Engine Takes Flight - Ep. 112](https://i.ytimg.com/vi/Pu-fe3-1fGs/mqdefault.jpg)
![Setting The Pitch & Installing a Max-Prop Classic - BaB
This is a stand-alone video that shows how to set the pitch on a Max-Prop Classic propeller. It also covers the installation of the propeller on the shaft, and covers some of the possible complications you might run into.
] Patreon:
- https://www.patreon.com/TheDigitalMermaid
] Channels that have Helped Me;
* @ProjectBrupeg
* @OffGridGarageAustralia
* @AcornToArabella
* @BillCarlson
] References;
PYI - MaxProp Easy 3-Blade, 17
- https://store.pyiinc.com/products/max-prop-easy?sub-category=Max-Prop-Propellers&variant=4037589697
- @PYIinc
Max-Prop Classic Manual
- https://www.pyiinc.com/downloads/max-prop/max-prop-3-blade-classic-instructions.pdf
PYIs 3-Blade Classic Max-Prop Installation Instructions - Playlist
- https://www.youtube.com/watch?v=vICO2m0aHVk&list=PL8B01802857DFE0B4
] Chapters
0:00 - What Is This Video?
1:03 - Why Would You Change Your Pitch?
2:22 - What is Propeller Pitch?
4:09 - The Names of the Parts of the Propeller
5:14 - Making Sure The Key is Sized Properly
6:08 - The Pitch to Prop Angle Lookup Table
6:41 - The Handedness of Your Prop
7:14 - Determining Your X Configuration Letter
7:56 - Mating The Center Gear To The Hub
8:48 - What To Do If The Center Gear Doesnt Seat
9:51 - Woops, Forgot The Center Nut
10:33 - Installing The Nuts Locking Pins
12:12 - Installing The Spinner Halves
13:21 - Determining Your Y Configuration Letter
14:26 - Marking Your Y Configuration
14:59 - Putting The Blades On The Spacer
15:32 - Putting the Blade Assembly In The End Cap
16:34 - Connecting The Blades to The Hub
19:01 - Testing The Blade Rotation
19:49 - How To Grease The Prop
22:19 - Locking The Bolts With Cotter Pins
23:43 - Installing The Sacrificial Anode Setting The Pitch & Installing a Max-Prop Classic - BaB](https://i.ytimg.com/vi/FG7feNRWvWs/mqdefault.jpg)