Uploaded September 2026 | Updated November 2026, 2 hours ago
In order for the mast to be a sacrificial node in a lightning strike, I have to design my own lighting from scratch. This video covers the ever-so-exciting process of designing and assembling the LED modules for the lights.
In this video, I discuss in more detail the plans for "Beacon Mode", which is a feature that could literally help save my life someday.
-=] Patreon:
- patreon.com/c/TheDigitalMermaid
-=] Channels that have Helped Me;
* @ProjectBrupeg
* @OffGridGarageAustralia
* @AcornToArabella
-=] References;
InvenTree Inventory Management
* inventree.org
Diodes Inc AL8861QMP-13
* diodes.com/part/view/AL8861Q
ams OSRAM LEDs:
* Red: LJ CRBP.01-JZLX-27-3A4A
* ams-osram.com/products/leds/color-leds/osram-oslon-signal-lj-crbp-01
* Green: LT CRBP.01-KZLZ-36-Q525
* ams-osram.com/products/leds/color-leds/osram-oslon-signal-lt-crbp-01
* White: LUW CRBP.01-LYMY-G4J4-Y474
* ams-osram.com/products/leds/white-leds/osram-oslon-signal-luw-crbp-01
Miniware MHP30 Mini Hot Plate
* https://www.e-design.com.cn/en/Mini-Hot-Plate-Preheater-MHP30-PG9226717
MG Chemicals 4901 – Sn99 No-Clean Solder Wire
* mgchemicals.com/products/soldering-supplies/solder-wire/solder-wire-for-electronics
Chipquik TS391LT - No-Clean Sn42/Bi57.6/Ag0.4
* chipquik.com/store/product_info.php?products_id=470006
Matt from 103 Squadron (@Mattfrom103)
* youtube.com/@mattfrom103
Blondel–Rey law
* nist.gov/pml/sensor-science/optical-radiation/effective-intensity-flashing-lights
* onlinepubs.trb.org/Onlinepubs/trr/1987/1111/1111-009.pdf
Saccadic Latency
* en.wikipedia.org/wiki/Saccade#Timing_and_kinematics
-=] Chapters;
0:00 - Let's Build Lights for the Masthead Controller
1:45 - Core Parts of the Masthead Controller
3:54 - Heavy Pour Soldering and the Miniware MHP30 Preheater
6:58 - LED PCB Oopsies
8:50 - PCB Assembly Tips, Plan and Prep
10:59 - Pondering Soldering the LED
13:03 - Trying to Attach Pigtails
14:47 - Scratch That, Back to the LED
15:36 - Which Pin is the Cathode?
16:46 - Soldering the LED with the MHP30 and Sparkful 8508D
17:20 - LET THAR BE LIGHT! But Maybe Pigtails?
18:59 - Turning Up The Light! (aka: Madi hurts her eye holes)
21:18 - Bulk Assembly Process & Part Tracking
26:14 - LED Assembly Process I Landed On
30:50 - A Golden Age for DIY
31:22 - Detecting Hidden Bridging
33:20 - Testing The LED PCBs
35:10 - Characterising the LEDs
39:09 - Why "Beacon Mode" and What is it?
41:46 - Lighting Up the Red and Green
44:47 - LED Build is Done, Only Two Issues!
-=] Music Attribution
Achaidh Cheide - Celtic by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 licence. creativecommons.org/licenses/by/4.0
Source: incompetech.com/music/royalty-free/index.html?isrc=USUAN1100340
Artist: incompetech.com
In order for the mast to be a sacrificial node in a lightning strike, I have to design my own lighting from scratch. This video covers the ever-so-exciting process of designing and assembling the LED modules for the lights.
In this video, I discuss in more detail the plans for "Beacon Mode", which is a feature that could literally help save my life someday.
-=] Patreon:
- patreon.com/c/TheDigitalMermaid
-=] Channels that have Helped Me;
* @ProjectBrupeg
* @OffGridGarageAustralia
* @AcornToArabella
-=] References;
InvenTree Inventory Management
* inventree.org
Diodes Inc AL8861QMP-13
* diodes.com/part/view/AL8861Q
ams OSRAM LEDs:
* Red: LJ CRBP.01-JZLX-27-3A4A
* ams-osram.com/products/leds/color-leds/osram-oslon-signal-lj-crbp-01
* Green: LT CRBP.01-KZLZ-36-Q525
* ams-osram.com/products/leds/color-leds/osram-oslon-signal-lt-crbp-01
* White: LUW CRBP.01-LYMY-G4J4-Y474
* ams-osram.com/products/leds/white-leds/osram-oslon-signal-luw-crbp-01
Miniware MHP30 Mini Hot Plate
* https://www.e-design.com.cn/en/Mini-Hot-Plate-Preheater-MHP30-PG9226717
MG Chemicals 4901 – Sn99 No-Clean Solder Wire
* mgchemicals.com/products/soldering-supplies/solder-wire/solder-wire-for-electronics
Chipquik TS391LT - No-Clean Sn42/Bi57.6/Ag0.4
* chipquik.com/store/product_info.php?products_id=470006
Matt from 103 Squadron (@Mattfrom103)
* youtube.com/@mattfrom103
Blondel–Rey law
* nist.gov/pml/sensor-science/optical-radiation/effective-intensity-flashing-lights
* onlinepubs.trb.org/Onlinepubs/trr/1987/1111/1111-009.pdf
Saccadic Latency
* en.wikipedia.org/wiki/Saccade#Timing_and_kinematics
-=] Chapters;
0:00 - Let's Build Lights for the Masthead Controller
1:45 - Core Parts of the Masthead Controller
3:54 - Heavy Pour Soldering and the Miniware MHP30 Preheater
6:58 - LED PCB Oopsies
8:50 - PCB Assembly Tips, Plan and Prep
10:59 - Pondering Soldering the LED
13:03 - Trying to Attach Pigtails
14:47 - Scratch That, Back to the LED
15:36 - Which Pin is the Cathode?
16:46 - Soldering the LED with the MHP30 and Sparkful 8508D
17:20 - LET THAR BE LIGHT! But Maybe Pigtails?
18:59 - Turning Up The Light! (aka: Madi hurts her eye holes)
21:18 - Bulk Assembly Process & Part Tracking
26:14 - LED Assembly Process I Landed On
30:50 - A Golden Age for DIY
31:22 - Detecting Hidden Bridging
33:20 - Testing The LED PCBs
35:10 - Characterising the LEDs
39:09 - Why "Beacon Mode" and What is it?
41:46 - Lighting Up the Red and Green
44:47 - LED Build is Done, Only Two Issues!
-=] Music Attribution
Achaidh Cheide - Celtic by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 licence. creativecommons.org/licenses/by/4.0
Source: incompetech.com/music/royalty-free/index.html?isrc=USUAN1100340
Artist: incompetech.com


![Converting 48v to 12v, Orion-Tr vs SmartSolar MPPT - Ep. 109
After the last vide, I heard that using a Victron SmartSolar MPPT charge controller was better than a Victron Orion-Tr for converting 48v to 12v. So I bought one of each to test!
I stumbled for a bit finding a way to connect the data, but I eventually was able to make an efficiency graph for both units. Spoiler, you folks were right!
] Patreon:
- https://www.patreon.com/TheDigitalMermaid
] Channels that have Helped Me;
* @ProjectBrupeg
* @OffGridGarageAustralia
* @AcornToArabella
* @BillCarlson
] References;
Victron Orion-Tr 48|12-30 Spec Sheet;
* https://www.victronenergy.com/upload/documents/Datasheet-Orion-Tr-DC-DC-converters-isolated-100-250-400W-EN.pdf
Victron SmartSolar 100|30 MPPT Spec Sheet;
* https://www.victronenergy.com/upload/documents/Datasheet-SmartSolar-charge-controller-MPPT-100-30-&-100-50-EN.pdf
] Chapters
0:00 - Is an MPPT a Better Buck Converter Than an Actual Buck Converter?
0:57 - The Test Plan, Possibly Doomed
2:54 - Orion-Tr vs SmartSolar Pros and Cons
5:21 - Substantial Cost Difference
6:06 - Setting up For Testing
8:50 - Moving the 48v SmartShunt Power
10:50 - Back to Setting Up The Orion-Tr
12:41 - The Start of The Struggles; Output Voltage Adjustment
14:42 - Bringing the 12v Side Online
15:51 - The Cerbo Gx Sees Only One Battery
16:18 - Starting Tests On the Orion-Tr
17:27 - The Start of a Useful Test Plan
18:25 - The BMS Config Didnt Work, As Expected
19:25 - A New Way To Collect Data
19:43 - Comparing the Orion-Tr and SmartSolar Heat Sinks
22:35 - Usiing Voltage To Collect Data
25:27 - OMG I Hate The Orion-Trs Voltage Adjustment!
26:08 - Orion-Tr Test Results!
26:56 - Configuring the SmartSolar MPPT
30:31 - Collecting SmartSolar MPPT Data
31:28 - A Clear Winner Already
35:16 - Final Results! Converting 48v to 12v, Orion-Tr vs SmartSolar MPPT - Ep. 109](https://i.ytimg.com/vi/N6UXMZVyNVQ/mqdefault.jpg)

![Ep. 97 - Wiring Two Motors; Distraction & Progress
On the surface, this video is about wiring up the second motor and controller. Really though, its about making progress, even when youre distracted.
This video was edited on S/Y Zora!
Sailing Yacht Zora
* https://www.instagram.com/stories/sailingyachtzora/
] Channels that have Helped Me;
* @ProjectBrupeg
* @OffGridGarageAustralia
* @AcornToArabella
* @BillCarlson
] Chapters
0:00 - A New Toy!
1:00 - The Plan and Size Comparison
2:59 - Paralleling Golden Motors over CANBus
4:12 - Sizing Bus Bars and Cables
8:26 - Breaking Down the Old Setup
10:50 - I Got Insurance!!
12:38 - Compatible Water Block?14:06 - Plans to Deal With Motor Directions14:53 - Wiring Up The Contactors
20:57 - Sorting Our The Main Controller Cables
28:36 - Planning For Redundancy
30:29 - Planning Cable Lengths
33:09 - Troubles Crimping Larger Cables
37:44 - Travel Plans and An Origin Story
41:42 - A Thought on Travel Videos
42:22 - Back To Crimping Troubles and Work-Arounds
46:52 - Cabling The Controllers, Mostly
48:33 - A Fuse Question, And Unknown Shmoo
49:57 - Finishing Up Cabling
56:25 - Whats Next? Ep. 97 - Wiring Two Motors; Distraction & Progress](https://i.ytimg.com/vi/NThY74tZYkI/mqdefault.jpg)


![A Diesel Engine Takes Flight - Ep. 112
After a winter of stepping over (and slipping off of) the engine every time I was on the boat, its finally out! I was too cheap to buy an engine hoist, so I had to figure out a way to get the engine up out of the vroom vroom truck and down onto my hand truck.
] Patreon:
- https://www.patreon.com/TheDigitalMermaid
] Channels that have Helped Me;
* @ProjectBrupeg
* @OffGridGarageAustralia
* @AcornToArabella
* @BillCarlson
] Chapters
0:00 - Back on the Boat
0:33 - The Travel Lifts Smallest Load
4:43 - Enjoying The Small Things In Life, Stairs!
5:50 - The Plan To Get The Engine Out of the Truck
7:25 - Not My First Rodeo
8:25 - Figuring Out the Rigging
10:31 - Lets Lift! Or Maybe Not...
13:13 - Near Miss
13:49 - A New Plan is Needed
15:05 - The New Plan
16:27 - Re-rigging
19:36 - Lets Lift, Again!
21:38 - Low Level Flying
22:06 - Bringing Her in to Land
23:47 - Its Down!
24:33 - Whats Next For the Ol Diesel?
26:43 - A Note on Upcoming Videos A Diesel Engine Takes Flight - Ep. 112](https://i.ytimg.com/vi/Pu-fe3-1fGs/mqdefault.jpg)

![Breaker Cabinets Made From Scratch - Ep. 115
The old circuit breaker cabinet was too small and rotted out. Lets make a new one, bigger and better!
] Patreon:
- https://www.patreon.com/c/TheDigitalMermaid
] Channels that have Helped Me;
* @ProjectBrupeg
* @OffGridGarageAustralia
* @AcornToArabella
* @BillCarlson
] References;
Epifanes Q&A/FAQ & How-To Videos;
- https://www.epifanes.com/page/q_and_a
- https://www.epifanes.com/page/how-to-videos
Dan Lee Boatbuilding; How to Apply Epifanes Clear Varnish;
- https://www.youtube.com/watch?v=K0PiMZGD5LQ
Travels With Geordie
* @TravelsWithGeordie
Sail Life
* @SailLife
] Image Attribution
Teak end grain;
- https://www.wood-database.com/teak/
] Chapters
0:00 - Whats Needed and Why
1:41 - The Build Plan
3:26 - Avoiding Edge Banding with Mitres
4:53 - Off To A Great Start...
6:25 - Cutting the Mitres
10:19 - Recapping Some Offline Work
14:45 - Test Fitting On The Boat
16:10 - Trimming and Fitting The Wings
20:26 - Plywood Dulls Blades Quickly
21:55 - Adding The Bilge Pump Switches
22:56 - The AC Cabinet / Sub-panel Plans
23:51 - Starting The AC Panel Build
26:39 - Oh Look, I Missed A Step
28:20 - Moar Chamfers!
30:27 - Planning The AC Cutouts
32:05 - Fancy Wood For a Radio Mount
33:38 - Struggling With Layout
35:02 - Making The AC Cutouts
37:25 - Contemplating Finishing
38:08 - Prep For The First Coat of Varnish
40:02 - End Grain; A Bundle of Straws
41:12 - Sanding And Surface Prep
43:52 - Cleaning Before Varnishing
48:01 - Did I Get The Wrong Marine Plywood?
49:02 - Making A Pinboard
49:52 - First Coat Prep; 50/50 Epifanes Mix
52:28 - Applying The First Coat; Colour is Off...
55:04 - Second Day. Second Coat
58:47 - Third Day, Third Coat, Wrong Tool
1:02:19 - Fourth Day, Last Coat?
1:05:50 - Drips, Runs, And Card Scapers
1:09:36 - Why Not More Coats?
1:13:42 - Was Four Coats Enough (For Now?)
1:15:06 - Installing The Main Cabinet!
1:18:18 - New Panel Handles!
1:18:56 - AC Distribution Panel Install; Not Perfect
1:20:30 - Installing The Main DC Breaker
1:22:49 - Rebuilding The First DC Panel
1:25:36 - Finishing Up And Restoring Power! Breaker Cabinets Made From Scratch - Ep. 115](https://i.ytimg.com/vi/RR_8_9IKeBU/mqdefault.jpg)
![The Nav Lights Come To Life - Ep. 129
After some effort, the masthead controller and the new lights start to show signs of life!
] Patreon:
- https://www.patreon.com/c/TheDigitalMermaid
] Channels that have Helped Me;
* @ProjectBrupeg
* @OffGridGarageAustralia
* @AcornToArabella
] References;
Littelfuse SMCJ33A
- https://www.littelfuse.com/products/overvoltage-protection/tvs-diodes/surface-mount/smcj/smcj33a
TI TPSM33606S3QRDNRQ1
- https://www.ti.com/product/TPSM33606-Q1/part-details/TPSM33606S3QRDNRQ1
MG Chemicals 4901
- https://mgchemicals.com/products/soldering-supplies/solder-wire/solder-wire-for-electronics/
Sailing Issues Lights and Shapes
- https://sailingissues.com/navcourse10.html
ESP-Prog-2
- https://docs.espressif.com/projects/esp-dev-kits/en/latest/other/esp-prog-2/user_guide.html
YOJOCK (Kowsi) KWS-066C USB-C Power Meter
- https://www.aliexpress.com/item/1005004599171312.html
The Night Pat Murphy Died - Great Big Sea (@GreatBigSeaOfficial)
- https://www.youtube.com/watch?v=PDvhFp_JSg0
Usagi Electric (@UsagiElectric)
- https://www.youtube.com/@UsagiElectric
] Chapters;
0:00 - New Assembly Process
2:16 - Masthead Controller Assembly Begins
4:59 - Verifying The Input Reverse Polarity and Over-voltage Protection
8:09 - Installing the Buck Converter
13:30 - Minimum Usable Parts
14:59 - Designing The Masthead Tricolour Light Housing
21:44 - Masthead Light Housing Assembly
27:22 - The First Power Up Test Plan
30:20 - Powering it On! ... Or Maybe Not.
32:00 - No Signs of Life; Why?
34:13 - Trying To Deduce Whats Wrong...
37:09 - Signs of Life, And a Note On Mental Hygiene
41:40 - Distraction Needed; Building the Masthead Lights
47:57 - Fixing the UART Communication to the ESP32
49:26 - Blinding Myself Testing the Masthead Lights
55:30 - Tips for Finding USB Devices on OSX
58:29 - What is a Watchdog Timer?
1:00:56 - The ESP32 Boot Dance
1:01:53 - Choosing Rust over C for Firmware; But Why?!
1:03:39 - The First Firmware Load!
] Image Credits
Arc of visibility
- https://sailingissues.com The Nav Lights Come To Life - Ep. 129](https://i.ytimg.com/vi/Raa7gDk7zmo/mqdefault.jpg)