@JohnSL
  @JohnSL
JohnSL - Random Products | Haas Coolant, More Leveling, and Vise @JohnSL | Uploaded August 2019 | Updated October 2024, 8 hours ago.
I have a lot of content this time. I had a long, very helpful, conversation with the service manager for my local HFO and discovered that I don't need to worry about twist, so my machine leveling is done. Then the local distributor for Blaser Synergy 735 stopped by to help me clean out my machine and charge it up. Finally, I got a vise, installed it, and promptly broke a tip on my Haimer.

I also discovered that the 750MB memory upgrade appears in the Hard Disk section, and it's just as fast as RAM.
Haas Coolant, More Leveling, and Vise3D Printed vs Aluminum Injection MoldsMorgan G-100T First Injection MoldLathe Electronic Lead Screw and Cross Slide Part 1#38 Boring, Taigmach Part 3Nextion Display for my Injection Molding ControllerMaking an ISO 20 Tightening FixtureThe MetricizerMaking a Floating Shoe Shelf with a Yeti SmartBench CNC RouterR8 Spindle Install, Taigmach Part 7Precise Sizing and Squaring Stock on a CNCHaas FNC with Thumb Drives and Networking for pre NGC Machines via a Raspberry Pi

Haas Coolant, More Leveling, and Vise @JohnSL

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER