Uploaded December 2023 | Updated November 2026, 5 hours ago
làrachd is utilised as an input stage for the guitar.
The output from làrachd is patched to the Onset Input of arbhar.
When an onset signal is detected, arbhar begins recording the guitar. Once the buffer is full, we can use the Scan Knob and Spray Knob to explore which part of the recording we would like to hear.
The guitar signal normals to làrachds envelope follower.
The Positive Envelope Output of the làrachd is used to modulate arbhars Intensity. As a result, when a loud input signal is present, less grains are triggered from the arbhars Continuous Granular Engine.
The Negative Envelope Output is offset using a vincâ and used to duck arbhars internal reverb as well as adjust the Dry/Wet Mix when an input signal is present.
arbhar’s Pitch Deviation Knob is positioned fully clockwise meaning grains are transposed up and down octaves.
Finally, the left and right outputs of the arbhar are patched to the cuïr, which is used for gain staging and final signal output.
làrachd is utilised as an input stage for the guitar.
The output from làrachd is patched to the Onset Input of arbhar.
When an onset signal is detected, arbhar begins recording the guitar. Once the buffer is full, we can use the Scan Knob and Spray Knob to explore which part of the recording we would like to hear.
The guitar signal normals to làrachds envelope follower.
The Positive Envelope Output of the làrachd is used to modulate arbhars Intensity. As a result, when a loud input signal is present, less grains are triggered from the arbhars Continuous Granular Engine.
The Negative Envelope Output is offset using a vincâ and used to duck arbhars internal reverb as well as adjust the Dry/Wet Mix when an input signal is present.
arbhar’s Pitch Deviation Knob is positioned fully clockwise meaning grains are transposed up and down octaves.
Finally, the left and right outputs of the arbhar are patched to the cuïr, which is used for gain staging and final signal output.



![Instruō - tràigh Design | Project Overview
Related links:
• Original Instruō - tràigh [Signature Edition] overview | https://youtu.be/AfdHsUG6XjQ
• DivKid Winston tràigh feature | https://youtu.be/BCwvgQQUbi4?si
*tràigh design | Synth design series*
• Episode 1 - https://youtu.be/4iwu9G6zji4
• Episode 2 - https://youtu.be/UzohwRfge3A
• Episode 3 - https://youtu.be/tI0cQyLMTsg
• Episode 4 - https://youtu.be/xh6RkCffNgY
• Episode 5 - https://youtu.be/-XHrDBgti_k
*Signal Sounds Glasgow*
https://www.signalsounds.com/
~~~
Hello!
This video is a project overview of the Instruō tràigh [Signature Edition]/Winston model.
Its a strange project which Ive found is a bit tricky to explain in a minimal word count. Which is why I produced this video to give an overview.
Ill try in text for as well though:
In short. I revisited an old module design. The tràigh. Its the second Instruō module I designed which has been out of production for a number of years.
I have a dog.
Winston is an 8 year old greyhound.
Last year a cancerous mass was found on his right foreleg.
We proceeded with treatment of surgery and extended radiation therapy.
I came up with a plan. I revisited the tràigh, added some features, gave is a visual makeover and long form documented the full process.
I produced and sold a limited batch of 75 modules which have helped finance Winstons treatment and also covered a £1000 donation to the Glasgow greyhound rescue charity I adopted him from.
He is all well now!
This is me now publishing documentation of the project in condensed form (this video), and long form full detail of the design process.
I want to directly thank everyone who supported this project. This video is an update of how Winston did through his treatment and what I focussed on as a means of support.
I hope the full series serves as something useful to anyone interested in synth design. Its not a polished step-by-step by any means, but it is comprehensive in how much I documented of the process from schematic capture, component placement, PCB routing, graphic design and implementation as a faceplate.
Thank you again for all your support of Instruō for these past years. Instruō - tràigh Design | Project Overview](https://i.ytimg.com/vi/Tf8rzK1F0OI/mqdefault.jpg)


![Instruō - arbhar V2.0 Firmware Overview
Note: WATCHING THIS ENTIRE VIDEO IS NOT NECESSARY!
Ive curated it with chapter markings to encourage hopping around to specific features/examples. I hope this will work as a video reverence in conjunction with the full written manual.
A dedicated tutorial on how to upgrade your arbhar can be found here:
https://youtu.be/wO4jlw4fYak
The arbhar V2.0 firmware update is here!
In 2019 the launch of the arbhar heralded a new generation of granular processing in Eurorack. Sampled audio can be chopped into tiny grains, scattered, shaped, re-pitched, reversed, and layered for an endless range of audio manipulation from seamless frozen tones to mutated acousmatic madness. Each grain sounds with its defined specifications. When modulation is used, the per-grain parameter definition allows for true polyphonic layering.
With the introduction of firmware version 2 (2023) comes a complete rewrite of the entire codebase to implement both technical and conceptual improvements that will enhance the entire user experience of the arbhar. We have ensured that the overall feel of the module has been preserved as much as possible. Advances in efficiency and expanded features will allow the arbhar to explore many more sonic and musical spaces.
Meet the Lexer Method 2.0.
• Up to 88 stereo grains between two granular engines, allowing for polyphonic layering
• Mono and stereo input configurations
• Six 10 second individual audio buffers
• 1 volt per octave pitch tracking
• On-board random pitch deviation and grain direction probability
• Scan mode, Follow mode, and Wavetable mode
• Stereo pan, feedback delay, and reverb configurations
• Built-in condenser microphone
• Analogue input pre-amplifier and limiter
• Audio analysis with onset detection for automatic audio capturing
• Includes 2 HP passive CV Expansion module and 4GB USB flash drive
• User-definable configuration for complete instrument customisation
• Save, Load and Clone audio between layers
• Curate/recall entire performance configurations with up to 42 Scenes.
• USB import and export functionality
*Instruōduction*
00:00:00 Instruōduction
00:04:43 Whats new with arbhar 2??
00:04:59 [Whats new:] Grain count doubled
00:07:35 [Whats new:] New sample management
00:08:49 [Whats new:] Layer clone/Library load
00:09:26 [Whats new:] Sample Library/Expansion pack
00:10:13 [Whats new:] Accumulative Recording
00:10:40 [Whats new:] Additional ONSET detection modes
00:11:01 [Whats new:] STEREO!!
00:12:46 [Whats new:] Expanded FOLLOW MODE capabilities
*PRESET 1*
00:14:14 PRESET 1
00:14:57 Initialisation, Factory reset
00:16:57 Audio Input/Output
00:18:50 Parameters: LAYER | SCAN - Transport controls
00:20:16 CAPTURE, Recording audio
00:23:03 Parameters: INTENSITY | LENGTH - Grain playback
00:26:59 Grain distribution, OUTPUTS
00:28:33 Parameters: WINDOWING | DIRECTION - Grain playback
00:32:28 Parameters: SPRAY - Grain sourcing
00:36:46 PATCH EXAMPLE: CV SPRAY
00:39:31 arbhar V2 audio engine tech spec - Pushing granular limits
00:50:09 arbhar V2 Wavetable engine
00:54:08 PITCH - knob
00:57:09 PITCH - 1V/OCT
00:59:05 Pitch shifting - vari-speed
01:02:14 PITCH - DEVIATION (random)
01:10:23 PITCH - DEVIATION (quantised)
01:13:40 STRIKE - Second grain engine
01:20:28 Audio input - Microphone
01:26:21 Parameters: UNDO/CLEAR/DUB
01:31:09 PATCH EXAMPLE: kindling
01:33:56 Parameters: ONSET | CAPTURE
01:43:15 Targeted Capturing CAPTURE | LAYER
01:49:41 Ω OMEGA | LAYER
01:52:09 ONSET (alpha)
01:53:58 ONSET modes selection
01:54:12 ONSET (beta)
01:54:55 ONSET (gamma)
01:56:16 ONSET (delta)
01:57:16 ONSET (epsilon)
01:57:51 ONSET (zeta)
01:58:09 FOLLOW MODE (ONSET zeta)
01:59:20 Parameter TRACK & HOLD
02:01:57 MOD CV: Reverb
*CHANGING PRESETS*
02:07:16 CHANGING PRESETS
*PRESET 2*
02:14:14 PRESET 2 - Delay Mode
*LAYER CLONE / AUDIO LIBRARY LOAD*
02:19:26 LAYER CLONE / AUDIO LIBRARY LOAD
*PRESET 3*
02:27:21 PRESET 3 - STEREO
*PRESET 4*
02:36:57 PRESET 4 - FOLLOW MODE
02:40:25 Parameter - PHASE SWITCH
02:41:47 Granular delay (FOLLOW MODE)
*PRESET 5*
02:48:30 PRESET 5 - PANNING (MOD CV)
*PRESET 6*
02:54:04 PRESET 6
02:54:31 Accumulative Recording
02:59:04 Accumulative - Capture Reset
03:00:10 Capturing a collage
03:05:08 Accumulative - Targeted Recording
03:06:13 Accumulative - Engage/Disengate
03:12:34 Accumulative MOD CV (Reverb) Instruō - arbhar V2.0 Firmware Overview](https://i.ytimg.com/vi/U2KhZqMnM08/mqdefault.jpg)



![Instruō at Superbooth! [Setup Day]
Instruō at Superbooth! [Setup Day] Instruō at Superbooth! [Setup Day]](https://i.ytimg.com/vi/Ub9FGf-u30c/mqdefault.jpg)