[ GORDIX 小教室 ] 工作環境建置 @Cubiio
[ GORDIX 小教室 ] 工作環境建置  @Cubiio
Uploaded September 2026 | Updated November 2026, 3 days ago
⚠️記得開啟CC字幕 Please turn on closed captions (CC).
五分鐘內快速建置GORDIX工作桌與環境!🔥
You can set up your working space in 5 mins easily.
-
00:00 步驟一:準備工作桌|Step 1: Prepare the Worktable
00:15 步驟二:組裝錨座|Step 2: Assemble the Anchor Bases
01:12 步驟三:固定錨座|Step 3: Secure the Anchor Bases
02:16 步驟四:安裝犧牲層|Step 4: Install the Spoilboard
02:44 步驟五:量測工作桌|Step 5: Measure the Worktable
03:24 步驟六:標記桌面中心|Step 6: Mark the Worktable Center
03:36 步驟七:放置並固定加工材|Step 7: Position & Secure the Workpiece
04:08 步驟八:放置 GORDIX 主機|Step 8: Place the GORDIX Main Unit
04:13 連接集塵系統|Connect the Dust Collection System
04:29 整理電線與管線|Organize Cables & Hoses
04:44 步驟九:設定工作桌面尺寸|Step 9: Configure the Worktable
05:40 完成工作環境建置|Workspace Setup Complete
-

😎SHOP NOW!
gordix.muherz.com
[ GORDIX 小教室 ] 工作環境建置GORDIX: 3-in-1 Portable CNC. Happy Fathers DayCubiio 3: Truly Portable Laser Engraver 掌上型雷射機 #diycrafts #lasercutting #laserengraving #tech #home[Cubiio3 Classroom] #5 打字及手繪功能Gordix Portable CNC: Large Format without Rails #cubiio #woodworking #lasercutting #penplotter #petsGordix Portable CNC: Large Format without Rails #cubiio #woodworking #lasercutting #penplotter #pets[ GORDIX Tutorial ] GORDIX Firmware Update[Cubiio3 Classroom] #4 Image Engraving[Cubiio3 Classroom] #7 Convert .SVG to G-code[Cubiio3 Classroom] #8 Convert .DXF to G-code[ GORDIX 小教室 ] 繪圖轉檔工具 GORDIX STUDIO[Cubiio3 Classroom #3] Firmware Update
Cubiio |

[ GORDIX 小教室 ] 工作環境建置

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER