Uploaded November 2026 | Updated November 2026, 3 hours ago
⚠️Please turn on closed captions (CC).
-
00:03 Step 1: Download the Latest Firmware
00:46 Step 2: Extract the Files & Read the Instructions
01:21 Step 3: Delete the Old Firmware Files
01:36 Step 4: Copy the New Files to system/fw
01:58 Step 5: Eject & Insert the microSD Card
02:15 Step 6: Power On & Initialize GORDIX
02:40 Step 7: Open SETUP➡️Firmware
02:44 Step 8: Verify the Version & Start the Update
02:52 Step 9: Wait for Three Chimes & Hold the Knob
03:03 Step 10: Wait for Wake-Up & Reconnect Power
03:28 Confirm the Firmware Update
-
😎SHOP NOW!
gordix.muherz.com
⚠️Please turn on closed captions (CC).
-
00:03 Step 1: Download the Latest Firmware
00:46 Step 2: Extract the Files & Read the Instructions
01:21 Step 3: Delete the Old Firmware Files
01:36 Step 4: Copy the New Files to system/fw
01:58 Step 5: Eject & Insert the microSD Card
02:15 Step 6: Power On & Initialize GORDIX
02:40 Step 7: Open SETUP➡️Firmware
02:44 Step 8: Verify the Version & Start the Update
02:52 Step 9: Wait for Three Chimes & Hold the Knob
03:03 Step 10: Wait for Wake-Up & Reconnect Power
03:28 Confirm the Firmware Update
-
😎SHOP NOW!
gordix.muherz.com
![[Cubiio3 Classroom] #4 Image Engraving
[Cubiio3 Classroom] #4 Image Engraving [Cubiio3 Classroom] #4 Image Engraving](https://i.ytimg.com/vi/ni-Bt_YUWJk/mqdefault.jpg)
![[Cubiio3 Classroom] #7 Convert .SVG to G-code
[Cubiio3 Classroom] #7 Convert .SVG to G-code [Cubiio3 Classroom] #7 Convert .SVG to G-code](https://i.ytimg.com/vi/q2hVF-jzRc8/mqdefault.jpg)
![[Cubiio3 Classroom] #8 Convert .DXF to G-code
[Cubiio3 Classroom] #8 Convert .DXF to G-code [Cubiio3 Classroom] #8 Convert .DXF to G-code](https://i.ytimg.com/vi/rgyVMgkWTRE/mqdefault.jpg)
![[ GORDIX 小教室 ] 繪圖轉檔工具 GORDIX STUDIO
⚠️記得開啟CC字幕
準備圖檔,或繪製您想要加工的檔案並存為SVG格式,接著到GORDIX STUDIO網頁,轉出GORDIX可以使用的Gcode加工路徑檔吧!
-
Prepare your image file, or use your preferred drawing software to create the file you want to process and save it in SVG format. Then, go to GORDIX STUDIO and follow the instructions in the video to convert it into G-code files that GORDIX can use for processing!🔥
-
00:00 影片開始
00:01 步驟一 點選進入「轉檔工具(繪圖)」
00:07 步驟二 加入檔案
00:18 步驟三 關閉底圖 初步調整
00:26 步驟四 調整左方參數
00:56 步驟五 圖案填滿設定
02:06 步驟六 調整右方參數
02:26 步驟七 預覽
02:38 步驟八 下載檔案
02:51 步驟九 檢查Gcode
GORDIX STUDIO 👉🏻 https://gordix.muherz.com/studio
😎SHOP NOW! [ GORDIX 小教室 ] 繪圖轉檔工具 GORDIX STUDIO](https://i.ytimg.com/vi/tdWR4ovX5qc/mqdefault.jpg)
![[Cubiio3 Classroom #3] Firmware Update
[Cubiio3 Classroom #3] Firmware Update [Cubiio3 Classroom #3] Firmware Update](https://i.ytimg.com/vi/wbZExlr7MBg/mqdefault.jpg)