Uploaded December 2023 | Updated September 2026, 2 weeks ago

---

300C ABS, 17mm wide Nema 14 extruder @ 48V. Looks like 92mms3 and it takes a crap with .4CHT nozzle.

Started at 600mms, 40K acceleration, 40 square corner velocity. 0.5 line width, 0.25 layer height. I believe I ended up at 120% from start values. 1.05 extrusion multiplier in Super Slicer.

60% fan is way too much. Layers adhere, but can be split with some force. Maybe 25% is plenty.

Klipper screen correct in the flow estimation?