Uploaded May 2016 | Updated September 2026, 3 weeks ago
Building a glue-up station: part 2 in a series--assembling the clamp head support, step by step. This project appeared in Shop Notes magazine #62, March 2002. They posted a PDF of the cutting diagram as an online "Shop Notes Extra", which can be downloaded here:
shopnotes.com/files/issues/062/clamping-station.pdf
The glue-up station project requires some hardware which is not listed in the cutting diagram. You will need:
6 Bronze bushings 5/8" ID, 3/4" OD, 1" long
24 Hex nuts 5/8"
18 Flat washers 5/8"
6 Acorn nuts 5/8"
3 Quick release pins 1/4" x 3 1/2"
6 All-thread steel rods 5/8" x 15"
Numerous screws of varying types and sizes
And here are more places to find Wood Tools Workshop:
WoodToolsWorkshop.com
wtwshop.com/Instagram
plus.google.com/+woodtoolsworkshop
wtwshop.com/Twitter
wtwshop.com/Facebook
Building a glue-up station: part 2 in a series--assembling the clamp head support, step by step. This project appeared in Shop Notes magazine #62, March 2002. They posted a PDF of the cutting diagram as an online "Shop Notes Extra", which can be downloaded here:
shopnotes.com/files/issues/062/clamping-station.pdf
The glue-up station project requires some hardware which is not listed in the cutting diagram. You will need:
6 Bronze bushings 5/8" ID, 3/4" OD, 1" long
24 Hex nuts 5/8"
18 Flat washers 5/8"
6 Acorn nuts 5/8"
3 Quick release pins 1/4" x 3 1/2"
6 All-thread steel rods 5/8" x 15"
Numerous screws of varying types and sizes
And here are more places to find Wood Tools Workshop:
WoodToolsWorkshop.com
wtwshop.com/Instagram
plus.google.com/+woodtoolsworkshop
wtwshop.com/Twitter
wtwshop.com/Facebook
