Uploaded August 2016 | Updated November 2026, 3 hours ago
A description and demonstration of a metal cutting station I built. Successive videos will show the building process.
The station has a base consisting of two layers of 3/4" MDF and one layer of 3/4" baltic birch. An angle grinder is mounted to an assembly that rides on a hardwood rail with resin strips above and below for easy sliding. The rail is mounted to a sturdy arm which is bolted to the back of the base. A 1" steel u-channel is embedded in a dado running from front to back with two 4" steel plates on either side. The cutting takes place in the u-channel.
A spring and stop hold the assembly upright when not in use; the stop also catches the grinder when it is lower than the cutting point, but before it touches the u-channel.
The pattern for the station appeared in Woodsmith Magazine, volume 37, issue 221.
Other places to find Wood Tools Workshop:
WoodToolsWorkshop.com
wtwshop.com/Instagram
plus.google.com/+woodtoolsworkshop
wtwshop.com/Twitter
wtwshop.com/Facebook
A description and demonstration of a metal cutting station I built. Successive videos will show the building process.
The station has a base consisting of two layers of 3/4" MDF and one layer of 3/4" baltic birch. An angle grinder is mounted to an assembly that rides on a hardwood rail with resin strips above and below for easy sliding. The rail is mounted to a sturdy arm which is bolted to the back of the base. A 1" steel u-channel is embedded in a dado running from front to back with two 4" steel plates on either side. The cutting takes place in the u-channel.
A spring and stop hold the assembly upright when not in use; the stop also catches the grinder when it is lower than the cutting point, but before it touches the u-channel.
The pattern for the station appeared in Woodsmith Magazine, volume 37, issue 221.
Other places to find Wood Tools Workshop:
WoodToolsWorkshop.com
wtwshop.com/Instagram
plus.google.com/+woodtoolsworkshop
wtwshop.com/Twitter
wtwshop.com/Facebook