Uploaded March 2023 | Updated November 2026, 3 hours ago
This is just the straight up P&G all struggles included.
one front tensions by hitting disk 8 as the front disk is a gated spinner.
Lessons learned: when disks are all set - including 8 (where the front tension is held) - and one extracts pick to turn disk 9, when the lock is really ready to go, there's resistance on disk 9 - no resistance - just spins - disks are not set.
Will have a more tips and views vid anon - in the meantime...this not quite elegant pick for them dan points - and learning more about DD's.
Some great vids to learn about this approach with this lock:
yabende's youtu.be/GZjTBRZuzR8 and locknoob's youtu.be/BiKbBsgfnRU - both of whom get all the disks set first go.
_______________
00:00 start
01:03 pick starts (after key check)
02:47 disks seem set so going for tension swap from front to rear
03:38 first attempt at the move pick to spinner disk 9 ...
04:29 try it all again..
09:02 - another "almost" so up and down the stack again
10:09 - this is the last run to the real open
10:48 - O P E N
11:15 - gutting - nice and straightforward - remove nut at core (already removed grub holding in that nut that holds the core) and start pulling out disks
13:30 - shackle, ball bearings, collar for disks -
14:29 close up on disks to see false gates
14:54 - disk 5 - only disk with 2 false gates (zero cut) - all the others, but disk 1 have 1 false gate (disk one here only a true gate, zero cut)
15:38 all done
thank you - inside view / mini tutorial coming
This is just the straight up P&G all struggles included.
one front tensions by hitting disk 8 as the front disk is a gated spinner.
Lessons learned: when disks are all set - including 8 (where the front tension is held) - and one extracts pick to turn disk 9, when the lock is really ready to go, there's resistance on disk 9 - no resistance - just spins - disks are not set.
Will have a more tips and views vid anon - in the meantime...this not quite elegant pick for them dan points - and learning more about DD's.
Some great vids to learn about this approach with this lock:
yabende's youtu.be/GZjTBRZuzR8 and locknoob's youtu.be/BiKbBsgfnRU - both of whom get all the disks set first go.
_______________
00:00 start
01:03 pick starts (after key check)
02:47 disks seem set so going for tension swap from front to rear
03:38 first attempt at the move pick to spinner disk 9 ...
04:29 try it all again..
09:02 - another "almost" so up and down the stack again
10:09 - this is the last run to the real open
10:48 - O P E N
11:15 - gutting - nice and straightforward - remove nut at core (already removed grub holding in that nut that holds the core) and start pulling out disks
13:30 - shackle, ball bearings, collar for disks -
14:29 close up on disks to see false gates
14:54 - disk 5 - only disk with 2 false gates (zero cut) - all the others, but disk 1 have 1 false gate (disk one here only a true gate, zero cut)
15:38 all done
thank you - inside view / mini tutorial coming








