Uploaded July 2024 | Updated November 2026, 3 hours ago
This is a series of Fusion exercises that focus on sketching. The idea is to take a technical drawing and reproduce it in Fusion - a process that mirrors how I frequently use the software, as I create sketches on paper or physical models and translate those measured drawings/objects to 2D sketches and 3D models in Fusion.
I'd suggest taking a stab at making the sketch before you watch me do it. Here is a link to the index feed drawing: dropbox.com/scl/fi/dbknbxjvbaeptxow8z93m/index-feed-projection.jpg?rlkey=ebpyz8m8kllaz4te9z9jz1tg4&dl=0 (you do not need a Dropbox account to view or download the file)
This is a series of Fusion exercises that focus on sketching. The idea is to take a technical drawing and reproduce it in Fusion - a process that mirrors how I frequently use the software, as I create sketches on paper or physical models and translate those measured drawings/objects to 2D sketches and 3D models in Fusion.
I'd suggest taking a stab at making the sketch before you watch me do it. Here is a link to the index feed drawing: dropbox.com/scl/fi/dbknbxjvbaeptxow8z93m/index-feed-projection.jpg?rlkey=ebpyz8m8kllaz4te9z9jz1tg4&dl=0 (you do not need a Dropbox account to view or download the file)
![[UPDATED] CNC Routing with Fusion 360: How to avoid radiused inside corners
A remake of the video that I made to describe how we can make dogbone fillets in Autodesk Fusion 360. Autodesk actually included a link to the video in their Fusion News newsletter, but a couple commenters alerted me to the fact that I had a mistake in the video. This one is shorter, more correct, and more to the point. Good luck!
A great dogbone fillet Add-In for Fusion 360: https://github.com/caseycrogers/Dogbone
The CNC Joinery Notebook:
http://makezine.com/2012/04/13/cnc-panel-joinery-notebook/
PS: I didnt mention it, but note that the dogbones that face downward can effectively hide the solution, so that might be the best option if your bit/endmill isnt too big (in which case youll be cutting away too much of the edge at the end of your slot). [UPDATED] CNC Routing with Fusion 360: How to avoid radiused inside corners](https://i.ytimg.com/vi/oZDBR5QtjgA/mqdefault.jpg)









