![[UPDATED] CNC Routing with Fusion 360: How to avoid radiused inside corners @RobDuarte](https://i.ytimg.com/vi/oZDBR5QtjgA/maxresdefault.jpg)
Uploaded February 2016 | Updated September 2026, 2 weeks ago
A remake of the video that I made to describe how we can make dogbone fillets in Autodesk Fusion 360. Autodesk actually included a link to the video in their "Fusion News" newsletter, but a couple commenters alerted me to the fact that I had a mistake in the video. This one is shorter, more correct, and more to the point. Good luck!
A great dogbone fillet Add-In for Fusion 360: github.com/caseycrogers/Dogbone
The CNC Joinery Notebook:
makezine.com/2012/04/13/cnc-panel-joinery-notebook
PS: I didn't mention it, but note that the dogbones that face "downward" can effectively hide the solution, so that might be the best option if your bit/endmill isn't too big (in which case you'll be cutting away too much of the edge at the end of your slot).
A remake of the video that I made to describe how we can make dogbone fillets in Autodesk Fusion 360. Autodesk actually included a link to the video in their "Fusion News" newsletter, but a couple commenters alerted me to the fact that I had a mistake in the video. This one is shorter, more correct, and more to the point. Good luck!
A great dogbone fillet Add-In for Fusion 360: github.com/caseycrogers/Dogbone
The CNC Joinery Notebook:
makezine.com/2012/04/13/cnc-panel-joinery-notebook
PS: I didn't mention it, but note that the dogbones that face "downward" can effectively hide the solution, so that might be the best option if your bit/endmill isn't too big (in which case you'll be cutting away too much of the edge at the end of your slot).
![[UPDATED] CNC Routing with Fusion 360: How to avoid radiused inside corners](https://i.ytimg.com/vi/oZDBR5QtjgA/mqdefault.jpg "[UPDATED] CNC Routing with Fusion 360: How to avoid radiused inside corners
A remake of the video that I made to describe how we can make dogbone fillets in Autodesk Fusion 360. Autodesk actually included a link to the video in their Fusion News newsletter, but a couple commenters alerted me to the fact that I had a mistake in the video. This one is shorter, more correct, and more to the point. Good luck!
A great dogbone fillet Add-In for Fusion 360: https://github.com/caseycrogers/Dogbone
The CNC Joinery Notebook:
http://makezine.com/2012/04/13/cnc-panel-joinery-notebook/
PS: I didnt mention it, but note that the dogbones that face downward can effectively hide the solution, so that might be the best option if your bit/endmill isnt too big (in which case youll be cutting away too much of the edge at the end of your slot).")
